Hello Guys, Sa mga nagtatanong papaano yung settings para ma fixed lang yung clock at yung issues na namamatay yung led lights ito yung video para sa mga tanong nyo, ua-cam.com/video/RyxlsV5oZEU/v-deo.html sana makatulong 😊
Additional Tips: For those who only use this at night and want to have a brighter light in the night, set the time in PM instead of AM. For example the current time is 7am, keep on changing it (up button) until its 7pm. Then the light will be bright at night , but dim in the morning. Hope it helps.
Отличные часы, очень нравятся, размеры цифр 8х23 см, на расстоянии 4 м прекрасно смотрятся. Единственный минус, что даже при ночном понижении света индикации с 19 до 6 утра очень ярко светят и если кому не нужен такой раздражающий ночник, то можно легко доработать. Откручиваете сзади четыре крест винта и два под наклейкой на передней панели, вырезаете из цветной бумаги по контуру цифр прокладку фильтр. От плотности бумаги будет уменьшение свечение цифр. Я выбрал желтую бумагу, получилось мягкое теплое солнечное свечение, закрасил маркером мигающие секундные точки. Инструкция сложная, но можно настроить под себя. Часы у меня светят постоянно без авто выключения, отключил дату и температуру, будильники, это мне ночью, когда просыпаешься абсолютно не нужно. Повесил над телевизором, не сбиваются когда пропадает электричество, кабель питания достаточно длинный, но можно подключить простейший удлинитель USB, в общем получилось супер. Всем добра и тепла
if I unplug it and then plug it in again, will it be on or do I have to turn it on by touching some button? (I want to buy a smart outlet so I need to know if it will automatically turn on if I let the power inside of it)
Hello! Just install the battery, and all your settings will be saved even you plug and unplug the led clock, note: the battery is intended to save your settings and not to power the led clock
Question po if na connect mo po siya sa laptop and na off yung laptop mo amd them kung gagamitin mo ulit yung clock same po ba ang time kanina and wala nag change Appreciate if someone comments!
Hello! As of now ginagamit ko itong 3d led clock, naka connect sa PC ko thru usb, kung nakapatay yung pc nakapatay rin yung clock, pag-on ko wala namang nagbago sa setting or d naman sya nag reset sa default, naka save parin yung mga setting na ginawa ko, suggest ko lang wag mong tatangalin yung battery sa clock 😁
Mine is different....it's same button...but functioning is different...I'm going crazy...I can't fix it yet..🥴pls help it's... already 1 day which arrived
Click on the UP button and it will show either DP-1, DP-2 or DP-3. DP-1: LED display time, date, temperature exchange by turn. DP-2: Default display time, but if you turn to another mode, then it will display that mode always (unchanged) DP-3: Default display time, but if you turn to another mode, after 15 seconds non-operation, it will turn back to time display mode. Hope you understand much better than before and I'm sorry for late reply 😊
@@sashiro02 Click on the DOWN button, it will show you either ON SD and --SD. ON SD is to open the power saving mode where it will turn off the LED after 15 seconds. It will only re-lit if the sound reaches 75dB. Meanwhile, --SD will make the light steady and never turn off. It's to save the power. Hope it will makes you understand much better 😊
Ang hirap tanggalin ung kagayan ng battery nakakaloka … til now dko malagay. Ako lang ba 🥲 Edit: natapat ko n sa arrow thanks kuya! Naopenana! Nagana na sa wakas 😭
@@Mia-qm3my ok so I figured it out you click on the middle button with the little sun on it click on it once and it should say L-5L and then click on again and it should let you brighten it and dim it as well:)
hello! yes! basta may battery, lahat ng setting mo hindi matatangal, yung battery is intended para ma save lahat ng settings na ginawa mo at hindi para paganahin yung led clock
Click on the DOWN button, it will show you either ON SD and --SD. ON SD is to open the power saving mode where it will turn off the LED after 15 seconds. It will only re-lit if the sound reaches 75dB. Meanwhile, --SD will make the light steady and never turn off. It's to save the power. Hope it will makes you understand much better and sorry for late reply 😊
Hello! kung d umiilaw yung AL meaning hindi naka on yung A1,A2 or A3, ytung pagset mismo sa gusto mong oiras para mag alarm, d ko pa napagaralan, pero sa ngayon ang alarm na meron ako is 6:00pm and 12MN d ko na sya binago
Mine keeps blacking out like it happened to you at 11:34-11:40. Only if i bang the bottom part on the table or move it around it lights up again. What to do?
Hello! yung model ng 3D led Clock na gamit ko is walang adjustment for brightness, hinanap ko na pero d ko makita sa settings, napapansin ko nalang na from 6:00PM to 6:00AM (evening) nka DIM yung led lights, then from 6:00AM to 6:00PM nka full brightness naman yung 3D led Lights, meaning automatic syang naka dim sa gabi at full brightness sa araw,
@@JosephQuitalig same lng din tayo ng led watch sir yung nga din problem ko nakakasilaw talaga sa madaling araw, kaya ginagawa ko sa pc ko nlng sinaksak para pag nag off ako ng pc sabay din sya ma off, dati kasi naka saksak lng sa plug 24/7 on, sayang lang talaga at walang adjust brightness function
@@rickyrolls6460 sa pc ko rin naman sya naka connect, d ko nga lang binubunot sa saksakan at naka on lang yung UPS kaya kahit naka-off yung pc naka on parin yung led clock 😁
Good day! Is it natural? Some digital watch, specially those do not display seconds, the two dots separating the hour and minutes blinks, some are fixed, you can say that the blinks corresponds to seconds, i think 😁, if your asking me how to stop it and you want a fixed two dots lights on or off, i haven't try it yet, 😊
Sir salamat sa kaalaman , sabi mo po di kaya ng battery lang e bakit po kahit walang battery kapag sinaksak sa charger e gumagana po.. e useless po pala ang battery
Good day! Pag may time try ko kalikutin yung 3d clock papaano ma fixed yung date lang, sana lang same ng model yung 3d clock na nireview ko sa 3d clock na meron ka
Hello! Hmmm, paano ko ba ma compare yung sound ng alarm, kasing lakas ng alarm clock? Joke😋..kungnikukumpara sa alarm ng mobile phone halos kasing lakas or katunog nung mga phone na dial pad tulad ng nokia 3310, malakas naman
Hello! you can set the 12hr or 24hr Clock by Pressing the Set-up button then the Up or Down button, hold at least 3seconds until the 12hr and 24hr clock appears, then adjust unto your reference.😁 The 12-hour clock is a time convention in which the 24 hours of the day are divided into two periods: a.m. and p.m. Each period consists of 12 hours numbered: 12 (acting as 0), 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 and 11. The 24-hour/day cycle starts at 12 midnight (usually indicated as 12:00 a.m.), runs through 12 noon (usually indicated as 12:00 p.m.), and continues just before midnight at the end of the day.
Hello! Wala bang cable yung nabili mo? Sad naman, pwede mo naman ibalik sa seller or i ask sa seller, kung tingin ko abala, pwede ka naman bumili nung cable yun lang separate gastos 🤔
@@hycnthrco Try this- Press and hold the DOWN button, then, as SOON as the display changes, maybe L3, immeadiatly press the DOWN button again to toggle through the brightness settings. If you are too slow and the display changes to date, just start again. This worked with mine. Good luck.
Good day! Hindinnaman sa namamatay kundi nagpapalit sya between date, temperature and clock, parang 10 seconda yung clock then switch sa date for 2 seconds then switch ulit sa temperature then babalik sa clock, parang syang naka loop,
Yung sa akin nag ssleep after 10 seconds. You have to make a sound that reaches 75db to wake it up. Gusto ko sana e steady na naka on lng yung LED nya. Kaso d ko pa na figure out paano
Hello Guys, Sa mga nagtatanong papaano yung settings para ma fixed lang yung clock at yung issues na namamatay yung led lights ito yung video para sa mga tanong nyo, ua-cam.com/video/RyxlsV5oZEU/v-deo.html sana makatulong 😊
Sir ung temperature functional ba pano e set?
Additional Tips: For those who only use this at night and want to have a brighter light in the night, set the time in PM instead of AM.
For example the current time is 7am, keep on changing it (up button) until its 7pm. Then the light will be bright at night , but dim in the morning. Hope it helps.
how to turn off the two blinks?
Finally meron nakong nakitang magaling magexplain
what are the batteries for when you have it plugged in power?
Back up memory. It prevents the time you've set from being reset back to factory settings whenever the clock is unplugged from the mains.
@@SouthPawArtisthii everytime i take the plug out and put it in again the time resets. what do i do?
Отличные часы, очень нравятся, размеры цифр 8х23 см, на расстоянии 4 м прекрасно смотрятся. Единственный минус, что даже при ночном понижении света индикации с 19 до 6 утра очень ярко светят и если кому не нужен такой раздражающий ночник, то можно легко доработать. Откручиваете сзади четыре крест винта и два под наклейкой на передней панели, вырезаете из цветной бумаги по контуру цифр прокладку фильтр. От плотности бумаги будет уменьшение свечение цифр. Я выбрал желтую бумагу, получилось мягкое теплое солнечное свечение, закрасил маркером мигающие секундные точки. Инструкция сложная, но можно настроить под себя. Часы у меня светят постоянно без авто выключения, отключил дату и температуру, будильники, это мне ночью, когда просыпаешься абсолютно не нужно. Повесил над телевизором, не сбиваются когда пропадает электричество, кабель питания достаточно длинный, но можно подключить простейший удлинитель USB, в общем получилось супер. Всем добра и тепла
А як вимкнули будильник?
salamat sir....nakita ko nalaglag....oorder na ako..... matibay pala yan......
Ahahah!!!! 🤣
if I unplug it and then plug it in again, will it be on or do I have to turn it on by touching some button? (I want to buy a smart outlet so I need to know if it will automatically turn on if I let the power inside of it)
Hello! Just install the battery, and all your settings will be saved even you plug and unplug the led clock, note: the battery is intended to save your settings and not to power the led clock
@@JosephQuitalig thank you! :)
Question po if na connect mo po siya sa laptop and na off yung laptop mo amd them kung gagamitin mo ulit yung clock same po ba ang time kanina and wala nag change
Appreciate if someone comments!
Hello! As of now ginagamit ko itong 3d led clock, naka connect sa PC ko thru usb, kung nakapatay yung pc nakapatay rin yung clock, pag-on ko wala namang nagbago sa setting or d naman sya nag reset sa default, naka save parin yung mga setting na ginawa ko, suggest ko lang wag mong tatangalin yung battery sa clock 😁
@@JosephQuitalig ahh ok thx po☺️☺️
@@JosephQuitalig nice. Bale yun ang purpose ng battery, para kung iooff-on mo sya same time parin.
What language is that? I don’t understand it
Why have the title in English but not the actual voice in the video?
Hey, how does one set up the date???
is it possible to change the sound level when the lights activate?
Anu po silbi nung battery na nilagay
Boss paturo pano sya gumana kahit di na nakasaksak. Battery operated lang gusto ko sana. Pwede ba yun?
Hello! Kailangan naka plug, hindi pwede battery operated
sana bigyan kana ng award ng lazada engr hehe
anyone know how to keep it on time only? mine flashes through time, temp, and date.. would love it to just show time
Push the middle button at once.
Підкажіть, як в ньому вимкнути будильник?
How do i stop the colon from flashing?(this : symbol is called colon)
I really want to know but know one is telling me
Same here. Really need to know how to stop it flashing 😢
My battery isnt working what should i do?
@@Prashnachapagain61 replace it?
Mine is different....it's same button...but functioning is different...I'm going crazy...I can't fix it yet..🥴pls help it's... already 1 day which arrived
Hello po, lagi po ba mag rereset yung settings pag tinangal sa saksakan?
How do I make the time stay and not change to the date and Fahrenheit ?????????
ua-cam.com/video/RyxlsV5oZEU/v-deo.html this is the tutorial or instruction I made regarding your question, hope it helps (tagalog)
Click on the UP button and it will show either DP-1, DP-2 or DP-3. DP-1: LED display time, date, temperature exchange by turn.
DP-2: Default display time, but if you turn to another mode, then it will display that mode always (unchanged)
DP-3: Default display time, but if you turn to another mode, after 15 seconds non-operation, it will turn back to time display mode.
Hope you understand much better than before and I'm sorry for late reply 😊
@@wanfetrah6367 hello i want to ask how can i permanently on? thank you?
@@sashiro02 Click on the DOWN button, it will show you either ON SD and --SD. ON SD is to open the power saving mode where it will turn off the LED after 15 seconds. It will only re-lit if the sound reaches 75dB. Meanwhile, --SD will make the light steady and never turn off. It's to save the power. Hope it will makes you understand much better 😊
Lods paano yung brightness nya naka high palagi para kasi nag auto dim sya hindi na kita minsan pag bukas na ibang ilaw
Ang hirap tanggalin ung kagayan ng battery nakakaloka … til now dko malagay. Ako lang ba 🥲
Edit: natapat ko n sa arrow thanks kuya! Naopenana! Nagana na sa wakas 😭
do u rly have to press the button to check the time... it doesn’t stay lit
Omg I am waiting for mine to arrive!
Thankyou kuya muntik q na itapon saken
i cant adjust the brightness even though i looked at all the comments and instructions
did you find out how to do that?
Just hold the "down" button
@@SKLL3TR just hold the "down" button
Can someone help me adjust the brightness?! I need to dim it but can’t figure out how
Same! Please let me know when you know! It’s a nightmare trying to sleep 😩💅
@@Mia-qm3my Close your eyes
@@Mia-qm3my ok so I figured it out you click on the middle button with the little sun on it click on it once and it should say L-5L and then click on again and it should let you brighten it and dim it as well:)
@@Gabriela-vi4gu hiya! I’ve finally done it, thank you so much! :D
@@Mia-qm3myReally so glad I could help☺️
sir kapag ba naka off sya diretso padin ang oras nya pag open mo?
hello! yes! basta may battery, lahat ng setting mo hindi matatangal, yung battery is intended para ma save lahat ng settings na ginawa mo at hindi para paganahin yung led clock
Sakin kasi is bumabalik sa 12 idk anong nangyatri may battery nman
Di po ba pwede steady lng sya? Nag ooff after ng display ng time and date need pa noise para mag on ulit light
Good day! Same model yung 3d led clock your using?
ua-cam.com/video/RyxlsV5oZEU/v-deo.html this is the tutorial or instruction I made regarding your question, hope it helps (tagalog)
How to make the light steady and never turn off?
Click on the DOWN button, it will show you either ON SD and --SD. ON SD is to open the power saving mode where it will turn off the LED after 15 seconds. It will only re-lit if the sound reaches 75dB. Meanwhile, --SD will make the light steady and never turn off. It's to save the power. Hope it will makes you understand much better and sorry for late reply 😊
@@wanfetrah6367 tysm xoxox
ua-cam.com/video/jagwaEqhKk0/v-deo.html
@@wanfetrah6367 Thanks mate. That helped. :)
@@wanfetrah6367 thank u so much I was looking for this solution for a while now
Hello po, pano po mag set ng alarm? Tsaka bakit 2 dots lng ubg uniilaw saki? Yung pm at alarm ndi. Tnx
Hello! kung d umiilaw yung AL meaning hindi naka on yung A1,A2 or A3, ytung pagset mismo sa gusto mong oiras para mag alarm, d ko pa napagaralan, pero sa ngayon ang alarm na meron ako is 6:00pm and 12MN d ko na sya binago
thx sa info saka sa isa mo pa tut sana tumagal kasi un kahoy isang araw lang sira na buti na refund ko agad at eto sunod ko kinuwa
battery operated ba cya boss?
No
Mine keeps blacking out like it happened to you at 11:34-11:40. Only if i bang the bottom part on the table or move it around it lights up again. What to do?
Hello! There is a pinned comment where you can see a link, see if it helps you 😊
hello po paano naman po if PM & AL yung nakailaw? tysm po
The clock runs for about 5 seconds. How to fix it?
Hello! ua-cam.com/video/cFrwcaAJNRU/v-deo.html
hello naadjust po ba brightness nito? paturo nama ppo
Hello! Hindi ko mahanap yung settings para sa brightness adjustment, hindi kaya adaptive brightness ito? 😁, joke! D ko masagot yung tanong mo sorry, 😔
@@JosephQuitalig haha keri po thankyou!
pano po adjust yung brigtnes nya
hello!, sa tingin ko wala syang adjustment para sa brightness,
У меня накрылся один сигмент, что делать
Hello sir .. nice talaga sa lazada
Hi yung sa akin hindi po lumalabas yung power saving mode pag pinipindot yung down button.
Hello! Baka ibang model
Good evening sir😄
Lazada pa more😄
Bukas ng Gabi ang LS 😊
pano po na dim light lang palagi? nakakasiwalaw kasi sa umaga 3am na kasi ako natutulog dahil sa work
Hello! yung model ng 3D led Clock na gamit ko is walang adjustment for brightness, hinanap ko na pero d ko makita sa settings, napapansin ko nalang na from 6:00PM to 6:00AM (evening) nka DIM yung led lights, then from 6:00AM to 6:00PM nka full brightness naman yung 3D led Lights, meaning automatic syang naka dim sa gabi at full brightness sa araw,
@@JosephQuitalig same lng din tayo ng led watch sir yung nga din problem ko nakakasilaw talaga sa madaling araw, kaya ginagawa ko sa pc ko nlng sinaksak para pag nag off ako ng pc sabay din sya ma off, dati kasi naka saksak lng sa plug 24/7 on, sayang lang talaga at walang adjust brightness function
@@rickyrolls6460 sa pc ko rin naman sya naka connect, d ko nga lang binubunot sa saksakan at naka on lang yung UPS kaya kahit naka-off yung pc naka on parin yung led clock 😁
Sir.kumusta po digital wall clock working po ba hangang ngayon?
Hello! Yes still working
the two dots in the middle wont stop blinking
Good day! Is it natural? Some digital watch, specially those do not display seconds, the two dots separating the hour and minutes blinks, some are fixed, you can say that the blinks corresponds to seconds, i think 😁, if your asking me how to stop it and you want a fixed two dots lights on or off, i haven't try it yet, 😊
Those 2 dots are called a COLON.
hello po! hindi po ba pwedeng gamitin nang battery lang?
Hello! Hindi kaya ng battery lang
@@JosephQuitalig paano sir pag brownout? tapos bumalik na ung kuryente? nakasave pa rin ba ung sinet up mong time? ty
@@superagua13 Hello! yes, naka save parin yung ginawa mong set-up basta nakalagay yung battery at recharge
@@JosephQuitalig thank you so much po :)
Sir salamat sa kaalaman , sabi mo po di kaya ng battery lang e bakit po kahit walang battery kapag sinaksak sa charger e gumagana po.. e useless po pala ang battery
How do we change the time
So useless po ang battery?
Hello! Yung purpose ng battery is hindi para mapagana yung led clock pero para ma save yung mga settings na gagawin mo 😁
Just got mine today 😆
hey i was wondering if i gotta keep it plugged in at all times?
@@pearlchristopher1046 yes you do ! And it’s really bright so i never use mine I can’t sleep at night because how bright it is😆
@@simply.savonja5241 thank you very muchhh
how do u turn off alarm
Bkt nag blinking gustu ko sana time lang nakikita? Di ko need ng date 🥲 ganun ba tlaga
Good day! Pag may time try ko kalikutin yung 3d clock papaano ma fixed yung date lang, sana lang same ng model yung 3d clock na nireview ko sa 3d clock na meron ka
ua-cam.com/video/RyxlsV5oZEU/v-deo.html this is the tutorial or instruction I made regarding your question, hope it helps (tagalog)
anong gamit ng battery
Hello! CR2032
Paano po hinaan ang brightness
maingay po ba yung alarm?
Hello! Hmmm, paano ko ba ma compare yung sound ng alarm, kasing lakas ng alarm clock? Joke😋..kungnikukumpara sa alarm ng mobile phone halos kasing lakas or katunog nung mga phone na dial pad tulad ng nokia 3310, malakas naman
@@JosephQuitalig ok po thank you!!!
napagana nyo ng battery lang sir?
Good day! Hindi, kailangan nakasaksak palagi
dyay gan tik or gay gan tik?
how do i adjust the seconds
Same
hello po! paano po ba ang am at pm setting? para sa 12hr
Hello! you can set the 12hr or 24hr Clock by Pressing the Set-up button then the Up or Down button, hold at least 3seconds until the 12hr and 24hr clock appears, then adjust unto your reference.😁
The 12-hour clock is a time convention in which the 24 hours of the day are divided into two periods: a.m. and p.m. Each period consists of 12 hours numbered: 12 (acting as 0), 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 and 11.
The 24-hour/day cycle starts at 12 midnight (usually indicated as 12:00 a.m.), runs through 12 noon (usually indicated as 12:00 p.m.), and continues just before midnight at the end of the day.
kulang yun wire sa akin panu ba to
Hello! Wala bang cable yung nabili mo? Sad naman, pwede mo naman ibalik sa seller or i ask sa seller, kung tingin ko abala, pwede ka naman bumili nung cable yun lang separate gastos 🤔
Why does mine light up in red? :(((
Hello! First time reading a comment also never encounter with my 3d led clock about your concern, hmmm, maybe the battery is low? Not sure though 🤔
pano e dim yung ilaw idol?
Hello! D ko makita kung yung settings sa brightness, d kaya adaptive brightness ito? Joke 😁
@@JosephQuitalig haha ang liwanag sa gabi eh... hehe pinapatay ko nalang sa gabi... salamat papi...
How to adjust brightness po? Help meeee
Did you ever figure out how?? I’m having the same problem lol
@@Amanda_Razo I think there are different kinds of this clock, apparently the one I got cannot be adjusted.
@@hycnthrco Try this- Press and hold the DOWN button, then, as SOON as the display changes, maybe L3, immeadiatly press the DOWN button again to toggle through the brightness settings. If you are too slow and the display changes to date, just start again. This worked with mine. Good luck.
talaga po bang namamatay sya after ng ilang saglit
Good day! Hindinnaman sa namamatay kundi nagpapalit sya between date, temperature and clock, parang 10 seconda yung clock then switch sa date for 2 seconds then switch ulit sa temperature then babalik sa clock, parang syang naka loop,
@nicole flores yun ang d ko nasubukan, i fixed sa time lang at hindi na nagpapalit between date and temperature,
@@JosephQuitalig yan din gstu ko sana time lang. Wag na mag blink sa date
Yung sa akin nag ssleep after 10 seconds. You have to make a sound that reaches 75db to wake it up. Gusto ko sana e steady na naka on lng yung LED nya. Kaso d ko pa na figure out paano
@@HellseherEmill pareho ba 3d wall clock na nareview ko sa clock na gamit mo?
Paano po tanggalin battery?
hello! nasa video?
bat sakit nag rereset sya pag tinatanggal/pag na off T_T
Hello, checked the link on pinned comment, thanks 😁
Bakit po yung nabili ko nawawala ang ilaw nya
Good day! kung same yung model na review ko at yung sayo, ito yung complete set-up ng 3d Led clock ua-cam.com/video/RyxlsV5oZEU/v-deo.html
yan ang hirap pag di nagbabasa ng manual
Samin walang free battery
DCDW
???😅
Pakai 2 battery..
U have no idea 🤷♂️ what u doing lol 😂
Hello! Thats what we call unboxing, no idea untill the item was unboxed 😁
Sira agad wala pa one month
I want this😭😭
Paano tanggalin yung temperature at date?
Hello, checked the link on the pinned commnent, thank you
𝙁𝙖𝙞𝙨𝙖𝙡 𝙃𝙖𝙣𝙞𝙛 3𝙎𝙩𝙖𝙧
What.??