Opel Zafira Injection Pump PSG16 Coding

[@thierryraucourt3593]

Encore merci beaucoup pour ces informations bien détaillé heureusement qu’il y a encore des personnes comme vous pour aider les autres très bon travail merci encore

[@SimpleHOW]

Thanks :-)

[@MrMalozlo]

Exelent video bro. Holps only without relay can work too as you say in comments up. I will try to make 1 kable with obd port only for psg16 and carprog so i dont need to do pinout 😂

[@SimpleHOW]

Yes this pinout (bit.ly/3gxzgpm) can used without relay and when fuel pump installed into car you can read via OBD.

[@thijstheandroidgamer3078]

I have changed the milage and the vin number with carprog of the new psg16 ecu but now there are a lot oft of fault codes

[@SimpleHOW]

Maybe You did something wrong, or the PSG16 ECU is bad

[@Noswiatel]

What's the flowrate of the pump at stock parameters?

[@SimpleHOW]

If you about fuel quantity, then 4-5 mg.

[@Noswiatel]

@@SimpleHOW
4 to 5 mg per second?

[@SimpleHOW]

@@Noswiatel No, per stroke.

[@MrZika24]

I coding my vectra c with new pump but get the error p0606-FD

[@SimpleHOW]

Maybe new pump not good

[@adelin3179]

what program use for extraction the code ?

[@SimpleHOW]

Carprog software self extraction code.

[@adelin3179]

@@SimpleHOWis there any way to find out that code if I don't have carprog?

[@SimpleHOW]

From car pass or call to Opel dealer center and via VIN code You can buy car pass info, but this procedure can do it just car owner.

[@paueruanonim210]

Good job friend, can you please contact you I have a problem with psg 16 I need a pin code, I have an eeprom dump but can't find it

[@SimpleHOW]

Send for me, I check it, my email in channel description.

[@Immo_Off]

молодца ) хотя немного можно было упростить процедуру

[@SimpleHOW]

🤫😄

[@bodibilderarni273]

Что за музыка?

[@SimpleHOW]

Музыка из медий UA-cam

[@mouhamanourosalim6050]

Merci infiniment mon booss

[@bonjoureone]

How.??

[@SimpleHOW]

What how? ☺

[@djameleddinesaadi1354]

type relais 12v ?A

[@SimpleHOW]

Not need relay, you can connect directly to 12v.

[@djameleddinesaadi1354]

@@SimpleHOW thanks you

[@buckohuron4186]

If read eeprom from org pump and write to second pump via cp no must nothing programming 😀

[@SimpleHOW]

In theory yes, but not with carprog because it can only read information from the eeprom.

[@TommyCraft5]

@@SimpleHOW what obd do I need for carprog to work

[@SimpleHOW]

@@TommyCraft5 What You want do with carprog for this car?

[@TommyCraft5]

@@SimpleHOW read eeprom from psg16