Oh, shit. First video I found that explains exactly what problems I'm trying to fix. I like driving my '02 Tahoe more than my wife's '16 Tahoe because of that etc limit. Hate that groggy acceleration off a stop.
Love the video I have a hp tuner on the way, I just did a stage 2 btr cam and the truck idles fine with a small chop, it just really lacks power on the low rpms when you get on it from a stop so I'll try what you were staying about the etc and see if that helps!!
Just did it my tables were a bit different from the factory and after making changes it was not even close to what you had. I think i will do smaller changes and see if i can get closer to what you are getting on your high octane table. @@MaxTune
I bought a 2018 GMC 1500 Sierra Denali with the 6.2 ... someone had already put about 6 to 8 inches lift ... I get allot of issues with the traction control abs and suspension stuff and also would like to get rid of the active fuel management and run the straight 8 all the time.
Love your videos bro very explainable to understand I’m trying to put this truck I have back to stock because the fuel monitor won’t set so I think it has a tune on there so I just want to put back to stock
Super helpful. I’m going to use your tune for my Tahoe and my dad’s Silverado. I’d be interested in shift pressure change if it’s safe for the trans. Awesome info thanks!
I did an ls swap on a 2011 silverado 1500 crew cab about 9 months ago. What do you recommend for rev limit? LS2 with 6l80 transmission, also I've also been thinking about swapping the driveshaft. Your thoughts? Lastly do you have a means of bench tuning E38 ecms? I would like to have mine tweaked.
I'm doing a dod and vvt delete on 2010 tahoe. What are the things that I need to pay attention to when loading up a tune for it. Any tips? I want Trans to be firm and shift kinda sporty but don't wanna hurt anything. Thanks!
Good informative video. I have a 01’ Silverado Z71. Has a rebuilt stock motor and rebuilt 4l60e with a shift kit etc. I have been thinking about getting HP tuners . Want to try and tune as I do tow a Travel trailer and need a bit more power . I’ve never tuned these types of trucks. What would you recommend. Thank you for any help
More tutorials! I got a 220R TSP cam.. looking to get hptuners, do a base tune like this on my v8 LQ9 to get a hang of hptuners.. then install cam and tune again, thanks!
LSX ATLANTA thank you very much, just so you know I have yet to install my cam. Just got the MPVI2 so I wanted to do a base tune prior to tuning cam. 2002 Cadillac Escalade 6.0 LQ9 V8
Would this work on a 2014 Chevy Silverado 5.3? I have HP tuners already but new to using it. I’d like to delete v4 mode, get a little more power. Change shift points for better shifting with 35s. Any help would be greatly appreciated.
Hi Max I live in South Africa and have a 2001 Silverado 4.8 that i have dropped into my Nissan Hardbody , i have an HP Tuner Ver3 that i just purchased. Would you be able to help me please, at the moment my original 2.8L diesel engine had more power on the hills. It just seems as if something is out either spark timing or fuel trims or something. Could i use the settings you show here for that motor and gearbox . Thanks for a great video
Thanks for watching the video. Hopefully you figured out your issue by now. If not check on FB HPtuners pages or the official Hptuner forum. I’m a gas tuner and not a diesel, the above mentioned places have a wealth of info and knowledgeable people who tune diesels.
Hey quick description then a question... I have a 2001 silverado I just put a remanufactured 4.8 in it remanufactured 4l60e 2800 stall converter 220/224 cam longtube headers the truck will start but needs fuel to do so or it dies and when it does run it only runs run maybe 1 or 2 min before it cuts off I just bought the hp tuners but I have no idea on how to tune or to even get a base tune I live in the Atlanta area can ya help me?
Hi i have a 5.3 engine 2002 dbc..i run it for first time..i have rebuild it..end i put in a tsp stage1 low lift cam..it start directly idles fine but when i try to put thlotle on it engine not respord end go to die..only work better if i disconect tps end iac ..i remove all spark plug..end cylinders 5-7 the spark was as never work..can you help?
I’m getting ready to buy a hp tuner for my 5.3 swap everything is factory accept for headers on the motor, I’m new to this and don’t want to frustrate you with questions.. motor came from 04 Tahoe drive by cable.. do you have a tune file that may work for me.. I’m not doing any mods other mods as of now.. not running cats and using 36lb factory injectors.. any info is great thanks
I have 2016 escalade 6.2l 8 speed.i disabled afm.power enrichment 50% throttle. Removed tcc till 5th gear And sleeps till 5th. Mods 3rd cat Removed and straight pipe exhaust. What else can I do?
@@MaxTune you’re not too far from me. I live in dalton and I’ve been messing with hp tuners since august and it’s starting to piss me off lol I might have to come down to get some better insight on tuning my Camaro lol
I have a 04 GMC 6 l would like to get it tuned with a 08 6 l crate motor with VVT I don't have the vvt connected the computer the computer on a 04 does not have that function can you tune it
Damn my friend! How do you only have 1100 subs!?!? You have one more now. 👍🔔
After you did my Tahoe it really woke it up big time thanks day and night difference in
Hell yeah good simple to the point video no BS
As an up and coming tuner.... Thank you!!! The information was invaluable.
Oh, shit. First video I found that explains exactly what problems I'm trying to fix. I like driving my '02 Tahoe more than my wife's '16 Tahoe because of that etc limit. Hate that groggy acceleration off a stop.
Any chance you can upload a Gen 5 tuning video?
Love the video I have a hp tuner on the way, I just did a stage 2 btr cam and the truck idles fine with a small chop, it just really lacks power on the low rpms when you get on it from a stop so I'll try what you were staying about the etc and see if that helps!!
Solid video. Been looking for something like this. Could this apply to a nnbs model with a 6l80
Yea
Just did it my tables were a bit different from the factory and after making changes it was not even close to what you had. I think i will do smaller changes and see if i can get closer to what you are getting on your high octane table. @@MaxTune
I bought a 2018 GMC 1500 Sierra Denali with the 6.2 ... someone had already put about 6 to 8 inches lift ... I get allot of issues with the traction control abs and suspension stuff and also would like to get rid of the active fuel management and run the straight 8 all the time.
Call me during the week ph# 678-927-8083
Love your videos bro very explainable to understand I’m trying to put this truck I have back to stock because the fuel monitor won’t set so I think it has a tune on there so I just want to put back to stock
Did you check HPtuners repository?
Max themadtuner yea no luck
Super helpful. I’m going to use your tune for my Tahoe and my dad’s Silverado. I’d be interested in shift pressure change if it’s safe for the trans. Awesome info thanks!
If it’s maintenance has been regular, up tbe pressures 10% down low up to 20 up top,
I just came across your video. It's very helpful and useful. What would recommend for a base tune for a 03 GMC DENALI Awd??
I did an ls swap on a 2011 silverado 1500 crew cab about 9 months ago. What do you recommend for rev limit? LS2 with 6l80 transmission, also I've also been thinking about swapping the driveshaft. Your thoughts? Lastly do you have a means of bench tuning E38 ecms? I would like to have mine tweaked.
Well this work on 15 Silverado 5.3
I'm doing a dod and vvt delete on 2010 tahoe. What are the things that I need to pay attention to when loading up a tune for it. Any tips? I want Trans to be firm and shift kinda sporty but don't wanna hurt anything. Thanks!
Good informative video. I have a 01’ Silverado Z71. Has a rebuilt stock motor and rebuilt 4l60e with a shift kit etc. I have been thinking about getting HP tuners . Want to try and tune as I do tow a Travel trailer and need a bit more power .
I’ve never tuned these types of trucks. What would you recommend.
Thank you for any help
A tune will help with the torque. If you still need help, call during the work week for options to get tuned.
More tutorials! I got a 220R TSP cam.. looking to get hptuners, do a base tune like this on my v8 LQ9 to get a hang of hptuners.. then install cam and tune again, thanks!
Kawiki Pacici you can email me your specs and file and I’ll send back a calibration you can tweak from there.
LSX ATLANTA thank you very much, just so you know I have yet to install my cam. Just got the MPVI2 so I wanted to do a base tune prior to tuning cam. 2002 Cadillac Escalade 6.0 LQ9 V8
@@MaxTune what your email bud?
Would this work on a 2014 Chevy Silverado 5.3? I have HP tuners already but new to using it. I’d like to delete v4 mode, get a little more power. Change shift points for better shifting with 35s. Any help would be greatly appreciated.
Yessir
If you’re local 678-927-8083
What hp tuner did you purchase and where did you get it from i appreciate it.
www.hptuners.com sells them. I bought the mpvi2 basic tuner.
Jordan appreciate that !!
Hi Max
I live in South Africa and have a 2001 Silverado 4.8 that i have dropped into my Nissan Hardbody , i have an HP Tuner Ver3 that i just purchased.
Would you be able to help me please, at the moment my original 2.8L diesel engine had more power on the hills.
It just seems as if something is out either spark timing or fuel trims or something.
Could i use the settings you show here for that motor and gearbox .
Thanks for a great video
Thanks for watching the video. Hopefully you figured out your issue by now. If not check on FB HPtuners pages or the official Hptuner forum. I’m a gas tuner and not a diesel, the above mentioned places have a wealth of info and knowledgeable people who tune diesels.
Hey quick description then a question... I have a 2001 silverado I just put a remanufactured 4.8 in it remanufactured 4l60e 2800 stall converter 220/224 cam longtube headers the truck will start but needs fuel to do so or it dies and when it does run it only runs run maybe 1 or 2 min before it cuts off I just bought the hp tuners but I have no idea on how to tune or to even get a base tune I live in the Atlanta area can ya help me?
Sorry I don’t always get to my comments in a timely manner if you still need help text me 678-927-8083
Hi i have a 5.3 engine 2002 dbc..i run it for first time..i have rebuild it..end i put in a tsp stage1 low lift cam..it start directly idles fine but when i try to put thlotle on it engine not respord end go to die..only work better if i disconect tps end iac ..i remove all spark plug..end cylinders 5-7 the spark was as never work..can you help?
Thanks
Do u have video for a dummy? I’m just starting out
I’m getting ready to buy a hp tuner for my 5.3 swap everything is factory accept for headers on the motor, I’m new to this and don’t want to frustrate you with questions.. motor came from 04 Tahoe drive by cable.. do you have a tune file that may work for me.. I’m not doing any mods other mods as of now.. not running cats and using 36lb factory injectors.. any info is great thanks
Can you share your 2007 Silverado Tuned file?
How does it work? Can you tune it if I'm in another state?
Yes
Contact me Monday ph# 678-927-8083
do you do remote tuning? needing a fuel efficent tune for my 5.3l 2013 suburban
Yes
Text me after the long weekend 678-927-8083
I have 2016 escalade 6.2l 8 speed.i disabled afm.power enrichment 50% throttle. Removed tcc till 5th gear And sleeps till 5th. Mods 3rd cat Removed and straight pipe exhaust. What else can I do?
Driver Demand can be increased and remove some torque management.
Will this work on a 2014-2018 silverado 5.3?
Yes
@@MaxTune Thank You, Keep Up The Content & I Really Appreciate The Video & Information.
Hello I have a 2003 5.3 with a 4L80 2wd is this the same ?
The main difference is no AFM with your year.
I need tuning done
Call me Monday afternoon
Ph# 678-927-8083
4494 Acworth Industrial Drive Acworth GA 30101 suite 106 rear entrance by appt only.
@@MaxTune you’re not too far from me. I live in dalton and I’ve been messing with hp tuners since august and it’s starting to piss me off lol I might have to come down to get some better insight on tuning my Camaro lol
Will this same tune work for 6.0 4l80?
Yes
Call me tomorrow if you’re interested in having it done. 678-927-8083
Is an 08 silverado considered a gen 2?
Gen IV
@@gsphx602 thanks
I have a 04 GMC 6 l would like to get it tuned with a 08 6 l crate motor with VVT I don't have the vvt connected the computer the computer on a 04 does not have that function can you tune it
Feel free to give me a call 678-927-8083
@@MaxTune thanks I will give you a call here soon thanks
Do you have a tune for a 5.3 slightly modified cam cold air and intake and headers
I have tuned hundreds
Call Monday
678-927-8083
@@MaxTune
Are you in Atlanta??? I need my LM7 tuned
Yessir.
Need your for custom tune for my 2002 Tahoe please.
Do you have HPtuners equipment?
Yes and how much?
I’m just here for tires calibration
Let me know if I can help.
So you are just changing shit with no wide band or dyno?
I’ve been tuning 17 years. I’m not just changing things that I don’t know. Have a good one.
Hey do you do mail in tunes
Yes
What's ur email?
Sorry, just saw your comment. Hopefully you have resolved your concern.