Вставка
- Опубліковано 26 лип 2023
- Email us at glitznglittermichelle@gmail.com
Buy Me A Coffee Here! Thank you so much ! bmc.link/glitznglitr
To Become A Member of My Channel: www.youtube.com/@glitznglitte...
JOIN MY NEW FACEBOOK GROUP HERE!! / 233554272787110
Would you like a tour of my new resin room with poured resin counters? Click here: • #5 Full Tour Of My Res...
Click here for an easy quick way to clean your wet resin containers: • #13 How To Clean Your ...
Amazon Wish List: www.amazon.com/hz/wishlist/ls...
If you will be shopping on Temu - Please consider using my affiliate link here:
Temu Affiliate Link : temu.to/k/userFvCGhWawjG7
Temu Code: afd56942
_____________________________________________________________________
Let's Resin Affiliate Links:
Lets Resin - Resin Curing Machine: amzn.to/3NXkWXu
Let's Resin 150oz deep pour resin: amzn.to/43BMQwX
Let's Resin 20oz fast cure resin: amzn.to/44U9hOZ
Let's Resin 720z fast cure is amzn.to/3QCH3EH
Let's Resin 1gallon epoxy resin: amzn.to/3DJNRsd
Let's Resin 1 gallon table top resin: amzn.to/3Qxmidz
Let's Resin Polyurethane resin: amzn.to/3Q0qC4E
Let's Resin white alcohol ink (C deeper): amzn.to/3O4ZI8W
Let's Resin 450ml silicone cup: amzn.to/43SZOXv
Let's Resin 26 colors ink set: amzn.to/3q2vmMn
Let's Resin resin tape: amzn.to/47qgisU
Let's Resin collector mat: amzn.to/47tUkWa
________________________________________________________________________
Resiners Resin Dryer for Cup Turner --
resiners.com/collections/resi...
Amazon link For Resiners Products:
the AirLess bubble removal machine --www.amazon.com/Resiners-Remov...
Resiners Resin Dryer for Cup Turner -- www.amazon.com/Resiners-Machi...
_____________________________________________________________________
Misc. Items
99% Alcohol: amzn.to/3Z83cve
Heat Gun: amzn.to/3n6j9ol
Mini Torch: amzn.to/44vRJsp
Large Torch: amzn.to/46tqq3E
Large Disposable Mixing Cups: amzn.to/3TuByqW
Small Disposable Mixing Cups: amzn.to/3A2QCTy
Silicone Tool: amzn.to/3orcB46
Craft Knife: amzn.to/3KcLpOW
Deburring Tool: amzn.to/3lBzAs8
Lets Resin - Resin Curing Machine: amzn.to/3NXkWXu
Tumbler Turner: amzn.to/436Lrye
Mini Torch: amzn.to/44vRJsp
Large Torch: amzn.to/46tqq3E
Mica Spoon: KN10425
Cricut: amzn.to/3Qh1LcM
Happy Mail:
8730 Mystic Circle
North Port, FL 34287
Please accept some well-intentioned advice from someone who has developed debilitating dermatitis on my hands...wear nitrile gloves when using any epoxy or other chemicals. Even water feels like burning acid to my hands. Everyday tasks are either very painful or not possible due to swelling and broken skin. It's terrible.
I worked in industry where epoxy resins were used in bulk. Many people used epoxy with no problem… for years… and then suddenly they become allergic to the resins 😮
and it seems to be permanent.😢
I use it at 64 , but I power ventilate and use liquid glove (glove in a bottle) as a skin protection barrier. Even if the smell isn’t strong it doesn’t mean the fumes and allergies can still be problematic.
Your advise is solid and sorry that you are affected.❤
Giving polite safety concerns is part of being a good and caring person . most adults readily appreciate it , but some will laugh … until they are affected or see it first hand.
It’s far easier to ignore , but being affected personally one feels a duty to inform.
I was going to say, that mold was too deep to do the fast cure resin in the curing machine… it will flash cure on you… I learned that the hard way myself 😊
@@garyoverman4393 I got this stuff on my hands before I started using epoxy. Mine is from cleaning supplies and barbering. Some people seem to be able to tolerate chemicals better than others. But once you have it, there is no cure. The best you can do is "manage" it.
Ugh. That happened to me😢
I was fine working with resin for YEARS… literally YEARS.
Then I developed horrendous dermatitis that has affected every aspect of my life. I can’t even pull up my own pants without pain.
Awful. I wouldn’t wish this on my worst enemy. I have spent hundreds upon hundreds of dollars on bandaids, creams, doctors, dermatologists, more creams, etc.
Brutal. Absolutely BRUTAL😒😭
,
Hey, injustice thought I would let you know how I got all the bubbles out of that mould…. I got them at Christmas to make wreaths and I happened to remember this video and how you got a couple of bubbles in the tips… well, I sprayed 99.9% isopropyl alcohol into the mould before I poured my resin… making sure each crystal had the alcohol in the tips… after I poured the resin, I took a long tip paint brush and went through each crystal making sure I got down to the tips… they came out beautifully!!!
I was scrolling through my feed and saw your video again and I just thought I would let you know how I got my crystals to come out bubble free… have a blessed day!!
Thanks
WOW! Thanks Michelle for doing this video and inspiring me to step out of my comfort zone when it comes to making molds instead of having to buy those high dollar ones that I cannot afford!!! Your awesome!!!!!
You can do it! 😃
Now i see why some homemade mold cost so much. Theres alot to it. I had been wanting to know how to make them. Its alot of work. Wow!❤❤
That was fun watching. Thanks for sharing your talent
Glad you enjoyed it 🤗
I actually did this the other day, but I just use the hundred percent silicone that you use in your bathroom. I’ve been trying to figure out a way to make a live edge. That’s pretty cool that you’re showing it now. Thanks for sharing!!
Thank you so so much for this I been searching for ages on how they are made. Thank u x
Wow, that’s was a great tutorial, I love how your husband helps you with the extra work at the end, my hubby wines if I ask him to sand something for me, and that seahorse is so cute. Love it
He’s pretty good about anything I need help with 🥰
I saw someone use vinyl transfer tape as the bottom of the mold making tray, it holds down the blank very well and neatly....great tutorial!!!
That's a great idea!
Those are awesome !
Ooooh pretty!
Amazing tutorial… Thank you so much for sharing.
Beautiful crystals. ❤. Congrats on the mold making goodies from Let’s Resin. Very cool molds. Glad you show the mistakes. I’m great at mastering mistakes. 🤭
Michelle Thanks for all the videos that you do, they are so helpful. 😊
You are so welcome!🤗
Awesome video...Thank you!!
That was great😀
Thank you for sharing. ❤
Thank you so much....I have been trying to make a live edged mold but haven't been successful so hopefully using your tutorial will make a big difference for me.
Thank you so much Michelle. I have been wanting to try making a geod mold, and now you have shown us how easy it is to do. I in fact bought a few smaller crystals whilst in Cape Town for this. Been home a day, and your tutorial popped up. So anxious to start to do. Wish we had let's Resin here. But we will prevail. With people like you and Don how can we go wrong.
You can do it!!! Join my facebook group so we can see your results! 🤗
I think the seahorse is super beautiful!!
THANK YOU SO MUCH FOR SHARING THIS!❤
You are so welcome!
Very nice mold making tutorial ❤ thank you for sharing
My pleasure 😊
Wow - that is a lot of work. Great Job
It was a very smart idea to use crystal molds. I congratulate.
Thanks so much for sharing this, I have been trying to make my own moulds and this is just what I needed to learn all the ropes.
You are so welcome!
Awesome! Thank you I was trying to figure out how to do this.
Really pretty.
Great molds I do have some of the putty and liquid rubber. Just haven't tried it yet. Thank you❤❤❤😊😊😊
Definitely try!!
Awesome tutorial!!! Thank you so much!!
You are so welcome!
love those moulds. usually crystal points moulds are matte finish - love the shily ones and with the holo behind them - love it!
Thanks ☺️
Your molds turned out great Michelle
Thanks so much 😊
Well this is just cool!!!!
Yes, silicone reacts to UV resin but I'm glad you were able to fix it. They turned out lovely.
Thanks again! Another great tutorial!
Glad you liked it! 😃
This was super informative…. I’ve been wanting to make my own molds but haven’t just yet. Thanks Michelle!👍🏼
You are so welcome!
Greetings from Mumbai, India. Thank you for this video. Been tossing ideas around in my mind how to make a live edge mold as these are not available in my country and getting one from abroad is not an option as it’ll be at an astronomical cost. So now I can make my own thanks to you.
Glad it was helpful! 😊 that’s what I try to do for all those that can’t afford one or have access to one 🤗
I absolutely love the crystals you made, especially with the holographic film, it made them look prettier. This was a great inspiration for making moulds, thank you, from one Glitzy Gal to another ✨️✨️✨️ My daughter is 23 too!!! My mum passed recently, she loved to resin, ive inherited 3 massive storage box's full pf resin moulds, and everything to do with the craft. I've tried doing a few things a few years aga, however i think this summer i will have to give it another go woth everything mum left me. Your video's ate helping me woth so much inspiration. Thank you so much ❤😊❤
I’m so sorry about your mom, that will make it even more special to use her products! God bless you 😊
@glitznglitterbymichelle1 Thank you, yes it will. I've just spent a small fortune on mica powders and pigments lol, I hope I can do her proud. Thank you for your inspiration. I can't wait to start 🥰🥰🥰
Love this video
Thanks ☺️
Thank you
You're welcome
Thanks for sharing your process to make these. On your crystal molds you could try spraying with alcohol before pouring the resin. I have seen other artists doing this with mold that it is hard to get bubbles out.
Great tip! 😃
I use food containers to make my molds in, like yogurt come in, I also use them to pour my crystal candle in, like the ones Tea And Art made. so gorgeous. .
Great idea!
I found that the containers that Walmart sells chicken salad in, work well for casting silicone molds. They're easy to clean and reuse too.
I love your sea horse…
New subscriber 😊
Thanks for subbing! Enjoy the channel!! 🥰
Michelle, any chance you might do a tutorial on how you make one of the newer molds you are making.
There is one already in my channel - look for the stingray
You are an amazing artist. Thank you for the time you take for make your wonderful 🎉videos. Today is the first time I watched your channel ❤. I am so happy. Sorry. I don’t see if your sale your molds. I will ba so happy to bay you it. Thanks 🙏🏼 🎉😊
Thank you so much 😀 I’m glad you found me too!! I have lots of videos for you to binge watch LOL. My eBay link is always in the description box and I’ll put it here as well: www.ebay.com/str/glitznglitterbymichelle?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=acjoyi8kqw-&sssrc=3418065&ssuid=acjoyi8kqw-&widget_ver=artemis&media=COPY
Hi. You asked about how to avoid bubbles in your crystal points. When poyring your resin, do it very slowly. Pour in one spot only. That way the overflow of that spot wil slowly go into the next hole. You can also pour just a little bit and then use a microbrush to remove the bubbles in the points. Thank you for sharing this video. I have been thinking about casting my own mold as well, but I am going to use a waxy type of material that you use to make your master. That material is reusable. You use your heatgun with a quick movement to make that master shiny.
Interesting!! I’ve not heard of that kind!!
Волшебство 💯👌🏼
I was going to say, that mold was too deep to do the fast cure resin in the curing machine… it will flash cure on you… I learned that the hard way myself 😊
Yep I’m always learning as well 😁
Been aftet this mould for ages not found it in the uk yet and too expensive to import , but im new to resin and not at mould making level either but love your easy guide to making them
It’s not that hard! Give it a go! 😊
Fast cure resin Cured too fast in the curing machine right? Mine did too - was wondering if it was just me. Seemed like the machine got way too hot. Anyhow, big project - well done, well taught, thank you!
I was thinking that perhaps the pour was a little deep for the thicker resin. Maybe flash cured? The thicker resins are usually for thinner pours.
The curing machine does not always give me good results unfortunately 😞
was a thin trinket bowl with a thicker lid, but very small
I’d be interested in purchasing this mold. ❤ this.
Which one the blue or green one?
Possibly both.
Email me your address and I’ll get you a cost plus shipping. Glitznglittermichelle@gmail.com
On the crystal molds, I always stick my silicone tool in after filling them half away, then I fill the rest of the way.
Hi great video I loved the crystals them could be used in making geo painting but this for me to much work.
I understand it’s not for everyone 🙂
Iike all your tutorials! I've e made some molds in the past and have been wanting to make a square one but make it not exactly square. I'm hoping the crystals I have will work out. I've also got an acrylic sheet to make the puddy one on. Have you tried using an acrylic sheet before ?
Not yet
I love lets resin silicone. I love let's resin everything so far. You still have to poke and babysit any brand of crystal molds to get good bubble free points. trust me, I've fixed a few points. just sand that bad one then coat it with resin. Where you sanded it in spots If you don't clear coat the whole coaster your going to have spots that are not shinny. It takes a long time to make good molds. Trust me there's no bubbles in silicon if you mix it and pour it right. I can't believe y'all using those torches on everything. LOL Yep I see you got bubbles in your new mold where you didn't fix those points that had bubbles. been there done that.
I don't understand the way they use torches knowing it's damaging either, glad I'm not alone lol
I saw a woman who casted silicone inserts using let's resin silicone and old silicone molds. I believe it was a wine bottle topper mold.
I also saw Wanda's blessed Creations try to fix a silicone coaster mold by pouring fresh silicone on the bottom of her coasters and a day later it peeled right out.
So in certain circumstances silicone will not stick to silicone. It's just a matter of figuring out how and why.
I don't mess with silicone much, I have no need to yet. But it is interesting 🤔
Oh and I wanted to tell you another tip. Toonpish crafts makes inserts by pouring silicone on stamps. I noticed you bought stamps and remembered her video on that. They worked better than the stamps obviously. Have a blessed day sweetie ❤
What a great idea to use the crystal mold for your edges! You truly are brilliant! Thanks so much for helping us along with all,of your great videos!👍❤️
You are so welcome!🤗
I have a live edge chunky coaster that I made. Can I use that instead of making the clear one?
Yes you can!
Will you put the molds in your Ebay store? Would be nice.. thanks Love your videos..❤
I don’t sell that at the moment but if I ever do I’ll definitely post them there.
Wow, postdated
When you are pressing the live edges into the silicone, would it help to spray with the quick release so the edges fuget in and out easily? I hope that made sense. This turned out awesome. Thank you! 👏🏻👏🏻👏🏻
I will definitely try next time!
@@glitznglitterbymichelle1 I was only curious….I have never used the mold release and I a, not sure what it’s restrictions are. 🙂
Grow your own crystals with Epsom salt
I did with borax! Check out my video on UA-cam 😊
Can grow them with cream of tartar also!
I want one of those, but don’t want to do all that work to get one. Yours turned out great. Do you know where you can even buy one? I love how your seahorse turned out.
The only one I know of that sells them is Julie Cutts in Australia. I know a lot of people can’t afford that one so I wanted to help out those who can’t afford it or don’t have access to mail from over seas.
@@glitznglitterbymichelle1 thank you, I watch Julie too, but your right, they are expensive. I appreciate you showing us how to make our own.
I have been trying this, and running into issues with the crystals being not as shiny as the top. Any way to do something with the blank to make them have a glass coating before using it to make the silicone mold?
Probably would have to get another clear coat on it first before casting it somehow.
UV resin will cause the silicone not to cure properly, unless you let it sit for a week or two. That is probably why it came out dull. The clear silicone from Lets Resin will also be really sticky with UV resin. Platinum type silicones do not like UV Resin
Thanks for solving a mystery you didn't even know I have been struggling with 😊
When trying to make a blank fit to be turned into a silicone mold, perfection is the goal. Sounds like you have done this a few times.... how do you suggest getting unlevel areas to be shiny? Like the crystals around the edge.
I should have watched this before I messed up my silicone mold 😮. I have tried to make an inlay. For a tray mold. So I made it directly in the mold thinking it would just come out. It doesn’t! Any help to get it out?🙏
Silicone adheres to silicone I don’t think you can save it unfortunately 😑
I’m having a problem with my resin setting . So far it’s taking around 48 hours to cure . Is this normal ? Is it important to have it in a cooler or warmer place ?
Definitely warm place, even on a heat mat. If it’s still not curing then most likely it was not mixed properly or it was not measured properly 🥴
Have you noticed any of your older projects starting to yellow with this particular resin?
Nope not even one!! Very pleased with it.
not to be wasting any what I do is use a measuring cup with water pour in molds then you have your amount to use and I write the amount on the back of the molds
Yes I do that on 90% of them but sometimes I forget LOL
That little cutting tool needs to be sharpened… I use those in my leather working… if you get some string and coat it with some beeswax, you can then strop the blade and it will slice through that silicone like a hot knife on butter :)
Interesting I wonder why they don’t give instructions with that blade, it came with the silicone and at first I wasn’t sure what it was 😁
@@glitznglitterbymichelle1 funny thing is, it’s actually a cuticle cutter! Nail stylists use them to rum cuticles when You get a manicure… the ones that come in those kits are cheap Chinese knockoffs…Mia hate saying that about something from Let's Resin because I absolutely LOVE their resin, mica powders, and color shifting powders but their tools that they have been giving out are really cheaply made… they produced a mini drill a while back that I ended up writing a one star review on Amazon… I had NEVER given a product from Let's Resin anything less than 4-5 stars before… but that drill was a bloody joke! They took a mini drill from another seller, bought a bunch of them, put a nice finger tightening 3 jaw chuck on it, slapped their name on it and then jacked up the price from $9.99 to $19.99!!!! The ONLY difference in the drill was that nice 3 jaw chuck that you can get at any home improvement store for $5.00 or LESS!!! The drill even had the same manufacturing number on it! I just couldn’t believe they did that… but yeah, that little,tool is a really good gadget if you sharpen it up! There is a UA-cam video on how to sharpen those things… you can look up sharpening leather working edgers / bevel tools… you can use a thick piece of string or a thin strip of leather to sharpen it… you can use a polishing compound or beeswax… both work for me. Have a blessed day! I have enjoyed your videos…🙃🙂🙃🙂
@@glitznglitterbymichelle1it’s actually a cuticle remover lol… but it’s used to trim silicone and I even use it to trim excess resin instead of a debarring tool… I hate those demurring tools I just can’t get the hang of em with the spinning blade….
Where did you get the “ little crystal molds”?
Let’s Resin
@@glitznglitterbymichelle1 Thank you
My son is 30, I just bought Lego beginning set.
Why not put a piece of silicone texture sheet down instead of more poured silicone?
Sure that would probably work to! 😊
All sorts of odd things can cause inhibition of curing in liquid silicone. They're finicky.
LOL Who needs instructions, just leave those in the box.😂
😁
Where do you get the iridescent Sheets or whatever called
I got them on Temu 😊
@@glitznglitterbymichelle1 is that what it's called iridescent paper
@@karendarling7246 it says Aurora laser film foil on the order. 20cm
@@glitznglitterbymichelle1 thanks is it from tmeu
Yep from Temu
Thanks for the tutorial, I have tried, and it was a major failure 😢
What happened?
This was a long video and I fast forwarded to the end as the transcript was not helpful. Can you use Chapter Headings for each step❔
I have no idea, I’m pretty sure all that is auto generated because I don’t even add the transcript either. When I release a video it’s voice only. Again, it may be possible as I’m really new at all this and am always learning as well.
Is thatca Wisconsin accent
lol no, I’m originally from Ohio but moved to Florida in 96’
I just have to say I am angry with you. You got me hooked on temu and I’m going to start sending you my bills. 😂okay? Does that sound good! Joking of course but Uhg! I thought Amazon was evil.
Hahahaha I was like what!?? Oh no my first bad comment! 😂
You should warn ppl before it starts some ppl have trypophobia! That really creeped me out! Ugh😢
I don’t even know what that means 🫤
😶😶😶 Sorry...really Sorry, mas.....achei tudo muito rudimentar pra todo o material carissimo que vc tem!
No problem 😉
This looks terrible its like a second grade fathersday ashtray gift.
It’s only a mold to make coasters, it’s not a piece to give away!
Nobody said you have to do it! What you should do though is just be nice or just pass over being negative and rude!🙄🙄
And it's Father's Day, not fathersday! 😂😂
I learned that if something has small areas in the mold, pour a little resin at a time, squeeze the small tips to push the air out, and after you see the bubble pop at the surface, release the mold. It will help suck the resin into the tiny spots. It takes patience but has paid off for me more than once.
Wonderful instructions! I love your work! I would also love to buy one of the molds, since I have wanted a live edge mold for a long time but cannot afford the high cost!
I have one person in line, if they decide they don’t want them I’ll let you know 👍
@@glitznglitterbymichelle1 morning! Did you send off your molds to the person in front of me? If not I still would love them! Thanks
Yes I did, I’m sorry 😑