@@libertypowerwash9904 Thank you! Thats what I figured I was just told to be extra careful with aluminum because it can take the paint off easier so I didn't know if you had to do anything different
Shootout 407 no. I was scared also on my first one I did. It’s no different. Just make sure you are using soap tips and your good. Just set the expectations that you will get it cleaned but not restored.
@@libertypowerwash9904 you're the man thank you I appreciate you helping so I should start out with a soap tip and after I soap up the side go to something like a white tip that is like 40 degrees and ill be alright?
Cho Clean this was with my 4 gpm unit and took about 60min. I didn’t use my 10 gpm on this. Plus having to soap 3 of the sides 2 times didn’t help. This one was really bad.
Infamous Mobile Detail & Power Washing I used a 2 Barb injector. I use my own Liberty soap that I make. I run a metering valve on the soap line to see how strong I want it
Is that the Liberty Blue mix that makes the difference? Nice.
Tom B you know it does
Good stuff man.
Rocko Majone thanks
Would you be able to give me any tips on how to power wash aluminum siding?
Shootout 407 it’s the sam as vinyl. Low pressure soft wash. You don’t want to disturb the oxidation.
@@libertypowerwash9904 Thank you! Thats what I figured I was just told to be extra careful with aluminum because it can take the paint off easier so I didn't know if you had to do anything different
Shootout 407 no. I was scared also on my first one I did. It’s no different. Just make sure you are using soap tips and your good. Just set the expectations that you will get it cleaned but not restored.
@@libertypowerwash9904 you're the man thank you I appreciate you helping so I should start out with a soap tip and after I soap up the side go to something like a white tip that is like 40 degrees and ill be alright?
How long did it take you?
Cho Clean this was with my 4 gpm unit and took about 60min. I didn’t use my 10 gpm on this. Plus having to soap 3 of the sides 2 times didn’t help. This one was really bad.
What mix are you using that is blue?
Infamous Mobile Detail & Power Washing I used a 2 Barb injector. I use my own Liberty soap that I make. I run a metering valve on the soap line to see how strong I want it
What mix / chemical did you use ? What's 407 ?