i scored 52 out of 60 because of ur generosity... thank you for sharing your knowledge online its a blessing for people who cannot afford tution fees God Bless you with all the goodness... thank you once again
Abhinav......Thanks for appreciating my work.... All the best in life And do recommend this channel to your friends and classmates so that they can also benefit... Cheers....
Hi Dushyant..... Thanks for your appreciation... All the best.... And do let your friends know about this channel on drawing and mechanics so that they can also benefit.....
Not all heroes wear a cape. I had to write my graphics semester exam thrice and the only reason why i passed the third time was because of your videos. I even got a B+. Thanks a lot sir. You are a real life hero. I hope one day I can meet you in real. Till then my prayers and wishes.
Sir, your videos helped me a lot in understanding the concepts of engineering drawing during my semester exams. Your way of teaching is simply amazing. Thanks a lot.
Hi Anurag.......Well Thanks for appreciating my work... All the best in life And if you wanna support my channel visit this link: manaspatnaik.in/?page_id=401 Small contributions can make a Big Difference
If the section plane cuts at a distance of 10mm, then shouldn't we supposed to draw a circle of 10mm from its center and then draw the inclined line from its tangent?
But sir within 2 days that will be ur most kindness Sir ur way of teaching is unique and it developed my interest in engineering drawing Thank you so much sir
sir please answer this question given below before 30th june:- A cube of 65mm long edge has its vertical faces inclined to v.p. . It is cut by a section plane , perpendicular to v. p. , so that the true shape of the section is regular hexagon . Determine the inclination of cutting plane with the h.p. and draw the sectional top view and true shape of the section .
tq sir........good morning sir.. sir in question there is a line ( inclined 45 degrees to vp cuts the cone )... in our video where we have used that angle sir???
Sir,you elligle for PhD in engineering graphics .you Are reAlly great.my sir is also PhD but compaRe to you .your are are awesome keep doing this sir👍👍👍👌👌
Hi Imran.... I am sure these videos are helping you learn... All the best and do let your friends know about this channel so that they can also benefit....
Why would OC be 10 mm. Its mentioned very clearly in the problem that the section (AVP) passes 10 mm infront of the axis and point B does infact lie 10 mm infront of axis (which looks like a point). Just think about it ridhi....watch the animation again.
hi Manas thankyou for your great help i had exam today and thankfully i could run my imagination because of your videos.. there is a problem in sectional solid in which the angle of AIP is not iven instead the true shape of the section is given can u please upload some examples of that type too.. and also the tetrahedron type..
I will definitely take your suggestion...Thanks for appreciating my work.... All the best in life I have also started making lectures on engineering mechanics Do check it out on my channel page... Do share and recommend this channel to your friends and classmates so that they can also benefit... Cheers....
hii sirrr,,,plz start making videos of mchine drawing assemblies such as foot step bearing ...i m waiting for those videos...my semseter exams are very near...i hope u will consider
While drawing the true shape,we cut the arcs with the same distances(a', b',d' , e') in the front view.Why does those distances remain same in the true shape?
hi, Mr. Manas. ur videos are very fine and clear and easily understandable for diploma students too.... can u please take burden of doing a video on sectioning, need of it, types of it, type and size of line used to draw a section line, in detail.....
A cone of base diameter 60 mm standing upright is cut by a section plane such that the true shape is a parabola of maximum double ordinates 50 mm and the vertex of the parabola 70 mm from this ordinate. Draw the front view, top view and the true shape of the section. please answer
A right circular cone, of base diameter 60 mm and height 70 mm, rests on its base on HP. A section plane perpendicular to HP and inclined at 45º to the VP cuts the cone and is 10 mm in front of the axis. Draw its top view, sectional front view and true shape of the section
Can you do the same problem with condition : the shortest distance between the cutting plane and top view of the axis is 10 mm instead of 10 mm in front of axis
You can Mukesh.........but it hasn't been asked in the problem Thank u and all the best 😀Do share this channel and its playlist with your friends. 1. Engineering Drawing Playlist (ENGLISH): ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html 2. Engineering Drawing Playlist (HINDI): ua-cam.com/play/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU.html 3. Engineering Mechanics Playlist (OLD): ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html 4. Engineering Mechanics Playlist (NEW 2023-2024): ua-cam.com/play/PLIhUrsYr8yHxeypEyVdWeGNxWHjNxU_JP.html 5. Mechanics of Solids Playlist: ua-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html 6. Theory of Machines / KOM / DOM Playlist: ua-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html 7. AUTOCAD Playlist: ua-cam.com/play/PLIhUrsYr8yHyLArdiiSDLa0Fmz8YKIy7G.html 8. Machine Drawing Playlist: ua-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html Visit Main Channel Page(@manaspatnaikmech) for Playlists on specific topics. Second Channel for Hindi Audience: @btechplus Download the Manas Patnaik App for Premium content : bit.ly/3wMRxoc
1) A cube of 35 mm long edges is resting on the H.P. on one of its faces with a vertical face inclined at 300 to the V.P. It is cut by a section plane parallel to the V.P. and 9 mm away from the axis and further away from the V.P. Draw its sectional front view and the top view. plz answer it sir
Manasa...This problem is pretty simple thats why i didnot include it in my video library... And i am sure u can find its solution in ND Bhatts book.... First example from section of solids i believe......
Hi Sriramula Srinith........First of all....Thanks for appreciating my work.... I always focus on giving you guys excellent quality free education.... All the best in life and do let your friends know about this channel on drawing and mechanics so that they can also benefit....
. A right circular cone, diameter of base 60 mm and height 70 mm, rests on its base on HP. A section plane perpendicular to HI and inclined at 45 degrees to the VP cuts the cone and is 10 min infront of the axis. Draw its top view, sectional front view and true shape of the section.
Sir thank you so much I always recommend all my friends ki if you don't understand ghar jaake manas patnaik ke videos dekho meine sab wahin se sikha hai
Thanks for appreciating my work. Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English 1. Orthographic Projection: ua-cam.com/video/WG6H2pISUzQ/v-deo.html 2. Projection of Point: ua-cam.com/video/fK4h5gM73w8/v-deo.html 3. Projection of Line: OLD: ua-cam.com/play/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV.html NEW: ua-cam.com/video/pzE0D-Ijxd4/v-deo.html 4. Projection of Plane: ua-cam.com/play/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg.html 5. Projection of Solid: ua-cam.com/play/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm.html 6. Section of Solid: ua-cam.com/play/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v.html 7. Development of Surface: ua-cam.com/play/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v.html 8. Auxiliary Plane: ua-cam.com/play/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB.html 9. Interpenetration of Solids: ua-cam.com/play/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM.html 10. Isometric Drawings: ua-cam.com/play/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83.html 11. Conic Sections: ua-cam.com/play/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ.html 12. Cycloidal Curves: ua-cam.com/play/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z.html 13. Involute: ua-cam.com/play/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa.html 14. Plain Scale and Diagonal Scale: ua-cam.com/play/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9.html 15. Complete Engineering Drawing in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi 1. Orthographic Projection in Hindi: ua-cam.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html 2. Projection of Point in Hindi: ua-cam.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html 3. Projection of Line in Hindi: ua-cam.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html 4. Projection of Plane in Hindi: ua-cam.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html 5. Projection of Solid in Hindi: ua-cam.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html 6. Scales Hindi-Urdu: ua-cam.com/play/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB.html Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English 1. Forces: ua-cam.com/play/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0.html 2. Friction: ua-cam.com/play/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m.html 3. Shear Force and Bending Moment: ua-cam.com/play/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7.html 4. Trusses: ua-cam.com/play/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7.html 5. Centroid and Centre of Gravity: ua-cam.com/play/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p.html 6. Moment of Inertia: ua-cam.com/play/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy.html 7. Dynamics: ua-cam.com/play/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z.html 8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
a cone of diameter of base 50th and axis 50th long long is resting on its base on th HP .It is cut by a section plane perpendicular to the the VP inclined at 75degr to the HP and passing through the apex draw it's front view sectional top view and true shape of the section
Hey the auxiliary plane is which I mean AIP or AVP Is it AVP ?if yes then y not Auxiliary inclined plane(AIP) How to judge which to take? Please reply soon
+Thakkar Taniya Try to read the problem description carefully..... If the cutting plane is perpendicular to VP and inclined to HP then its an AIP.... And If the cutting plane is perpendicular to HP and inclined to VP then its an AVP....
Thank you sir.... You do a better work... The explanation of question is great sir.... All of my friends are learn ED by your channel.... Thanks sir 👍👍
i scored 52 out of 60 because of ur generosity... thank you for sharing your knowledge online its a blessing for people who cannot afford tution fees God Bless you with all the goodness... thank you once again
A friend in need is a friend in deed.,. Thank you so much .,, Sir
you saved my semester sir... thank you so much..
Abhinav......Thanks for appreciating my work....
All the best in life
And do recommend this channel to your friends and classmates so that they can also benefit...
Cheers....
sir i have been listening to your lessons right from the scales
im very thankful to u sir
u r helping me a lot with free of cost
Hi Dushyant.....
Thanks for your appreciation...
All the best....
And do let your friends know about this channel on drawing and mechanics so that they can also benefit.....
its really nice to wake up in the morning realizing that i too could do well in graphics...!! infact u saved my sem sir..!!thanks a lot
Hi Yashwanth.....
Enjoy the videos and all the best...
@@ManasPatnaikofficial sir isometric view explain
One of my friends recommended me this channel and it is helping me a lot . Thank you from a BITSian .
Not all heroes wear a cape.
I had to write my graphics semester exam thrice and the only reason why i passed the third time was because of your videos. I even got a B+. Thanks a lot sir. You are a real life hero. I hope one day I can meet you in real. Till then my prayers and wishes.
God bless u Noel.....
Fly high.....
Just seeing this one night before my semester! And u made me confident! Thanku so much sir!
Thank you so much Manas sir! Your videos are extremely helpful and your method of teaching is so systematic and easy to understand!
Sure sir 😊
You are wonderful. God bless your efforts.
thanks for your appreciation....
this is really motivating....
nicely explained and perfect communication skills...lot to learn from you .thank you sir..
Sir, your videos helped me a lot in understanding the concepts of engineering drawing during my semester exams. Your way of teaching is simply amazing. Thanks a lot.
Hi Anurag.......Well Thanks for appreciating my work...
All the best in life
And if you wanna support my channel visit this link: manaspatnaik.in/?page_id=401
Small contributions can make a Big Difference
sir we are really thankful to you.....your videos means a lot to us
If the section plane cuts at a distance of 10mm, then shouldn't we supposed to draw a circle of 10mm from its center and then draw the inclined line from its tangent?
Lk Ashiq u got a good point my man 👍
Lk Ashiq good
One of the best learning videos I have ever seen.
thanks sir!!
Thanks saurabh for appreciating my work...
Do encourage your friends also to subscribe and learn from this channel.....
All the best in life....
But sir within 2 days
that will be ur most kindness
Sir ur way of teaching is unique
and it developed my interest in engineering drawing
Thank you so much sir
this video is very useful and ur teaching is very clarity
Thank you for ur hard work sir. U really teach marvelous.. With ur help I am sure I'll get 4 credit points in engineering graphics exam 🙏
Sir , can u please tell me in which app you are explaining us (after the sectioning remaining part what you are showing in grey color)...
Sir can you please tell me what software u r using....???
sir please answer this question given below before 30th june:-
A cube of 65mm long edge has its vertical faces inclined to v.p. . It is cut by a section plane , perpendicular to v. p. , so that the true shape of the section is regular hexagon . Determine the inclination of cutting plane with the h.p. and draw the sectional top view and true shape of the section .
This is first lecture of section of solid or last lecture because introduction part in no there ?? Pls tell me sir
Nice work sir...i am really thankfull to you for your efforts
Thanks Tanmay for appreciating my work..
All the best and do tell your friends about this channel so that all can benefit...
Sir,in the time of online classes,u have helped a lot.I learn everything fromu. Thanks sir
tq sir........good morning sir..
sir in question there is a line ( inclined 45 degrees to vp cuts the cone )... in our video where we have used that angle sir???
Sir i have a doubt about auxiliary view,that means how to use auxiliary views in different situations?
Your videos are simply awesome sir.
And thanks for Clearing my doubt. You're explaining methods are crystal clear
which pencil should be use for hatching and what is spacing between the hatching plz tell
+Gaurav Takalkar
Use a 2H pencil to hatch and keep line spacing as 2 mm or 3 mm.....
Sir,you elligle for PhD in engineering graphics .you Are reAlly great.my sir is also PhD but compaRe to you .your are are awesome keep doing this sir👍👍👍👌👌
cant understand why you intend to say
U r great bro.... I hope ull succeed in future
Hi Imran....
I am sure these videos are helping you learn...
All the best and do let your friends know about this channel so that they can also benefit....
that's very nice I got to know better sir can you give up basic guide to how imagine various types of problems
sir when you cut the surface 10 mm from the axis, can we cut it in the FV also at an angle of 45°?
Your explanation skill is very nice 😀
Great😁...
sir, how can we make another top view on an auxiliary plane parallel to section plane
nice explanation...can you tell me which software you used for the 2D drawing part?
awesome way of explaining....love from IIT BHILAI
powlichu sir ,nice video :)
You are savior of exam sir
Thank you so much for your valuable explanation sir! Your teaching helped me to get A grade in first attempt😊
No doubt if ur teaching 👌
It’s a clear cut info
Can you please organise the playlist ?
Superb explaination sir thank u sir 😎
Hey sir .. I think that at 6:11 , OC should be 10mm and not Ob , u hv taken on as 10
Do correct me where I'm wrong...🤔
Why would OC be 10 mm. Its mentioned very clearly in the problem that the section (AVP) passes 10 mm infront of the axis and point B does infact lie 10 mm infront of axis (which looks like a point). Just think about it ridhi....watch the animation again.
sir how to take that angle 45°..Its hard to connect 45° angle line to that point..
Sir you should see the channel aperture, improvement pill, psych2go. Your voice is really calming. It'll be good if you do that informational stuff
Sir
How to ...draw their development lateral surface....
Sir ,there is no any short cuts for competitive field
I will be releasing a new course on Objective type problems for engineering drawing for ESE exams.
Waah aisa teacher hmko mile to top kr jayege
All the best saurav
1. Engineering Drawing (English) :
ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
2. Engineering Drawing (Hindi) :
ua-cam.com/play/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU.html
3. Engineering Mechanics:
ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
4. Mechanics of Solids:
ua-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html
5. Theory of Machines:
ua-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html
6. Machine Drawing:
ua-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html
7. Engineering Services Examination_Engineering Drawing_Prelims:
ua-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11:
ua-cam.com/play/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM.html
9. Manas Speaks Series:
ua-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Physics Channel Link:
ua-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
i have a doubt in some problem we cut the plane at vp in some of the prob we cut the plane at Hp. whats the difference sir
really wonderful and easy to explain for this topic
Thanks Nikunj for appreciating my work...
Do encourage your friends also to subscribe and learn from this channel.....
All the best in life....
Sir how to take 45 degree from 10 mm from O
What app does he use
sir make 1 video of the development of the surface of the same diagram too, please
hi Manas thankyou for your great help i had exam today and thankfully i could run my imagination because of your videos.. there is a problem in sectional solid in which the angle of AIP is not iven instead the true shape of the section is given can u please upload some examples of that type too.. and also the tetrahedron type..
I will definitely take your suggestion...Thanks for appreciating my work....
All the best in life
I have also started making lectures on engineering mechanics
Do check it out on my channel page...
Do share and recommend this channel to your friends and classmates so that they can also benefit...
Cheers....
hii sirrr,,,plz start making videos of mchine drawing assemblies such as foot step bearing ...i m waiting for those videos...my semseter exams are very near...i hope u will consider
sure man....i will
Sir, could you please tel me the role of true length in solids ?
Which software you were using to create this?
That is partly solidworks and partly powerpoint
thank you for your response
While drawing the true shape,we cut the arcs with the same distances(a', b',d' , e') in the front view.Why does those distances remain same in the true shape?
hi, Mr. Manas. ur videos are very fine and clear and easily understandable for diploma students too.... can u please take burden of doing a video on sectioning, need of it, types of it, type and size of line used to draw a section line, in detail.....
This may help
ua-cam.com/video/4PyKeFGjHOE/v-deo.html
Which equation⌚ show this section and shadow???
Can you please make a video on section of a sphere?
very helpful sir you have explained brilliantly.....thanks a lot sir
+vasu pandita
Thanks a lot Vasu....
All the best
And do let your friends know about this channel so that they can also benefit.....
Cheers.....
Manas Patnaik ofcourse sir
Sir, Do you have auto cad tutorials?
would be of great help....
Dont have any. But i will be making them in future.
Manas Patnaik okay.. your lectures are of great help btw
Sir you saved my first semester Engineering graphics. Thank you
Which year are you in right now bro??0
Sir please make a video on a topic shaft coupling
A cone of base diameter 60 mm standing upright is cut by a section plane such that the true shape is a parabola of maximum double ordinates 50 mm and the vertex of the parabola 70 mm from this ordinate. Draw the front view, top view and the true shape of the section.
please answer
You help me at my exam time.thank you sir 😊
It is very useful and thank you. You are explaining it very clearly
Thanks Chandana....
and all the best
Amazing Sir💎🏆🏆🏆
All the best Abhishek.....
1. Engineering Drawing (English) :
ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
2. Engineering Drawing (Hindi) :
ua-cam.com/play/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU.html
3. Engineering Mechanics:
ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
4. Mechanics of Solids:
ua-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html
5. Theory of Machines:
ua-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html
6. Machine Drawing:
ua-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html
7. Engineering Services Examination_Engineering Drawing_Prelims:
ua-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11:
ua-cam.com/play/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM.html
9. Manas Speaks Series:
ua-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Physics Channel Link:
ua-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
A right circular cone, of base diameter 60 mm and height 70 mm, rests on its base on HP. A section plane perpendicular to HP and inclined at 45º to the VP cuts the cone and is 10 mm in front of the axis. Draw its top view, sectional front view and true shape of the section
Excellent sir... u r just awesome .....
How to draw the true shape that means on what basis........ Plzz ans me
sir pls do video about perspective projection
Can you do the same problem with condition : the shortest distance between the cutting plane and top view of the axis is 10 mm instead of 10 mm in front of axis
Good evening SIR Can't we draw sectional side view for cone sir
You can Mukesh.........but it hasn't been asked in the problem
Thank u and all the best
😀Do share this channel and its playlist with your friends.
1. Engineering Drawing Playlist (ENGLISH): ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
2. Engineering Drawing Playlist (HINDI): ua-cam.com/play/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU.html
3. Engineering Mechanics Playlist (OLD): ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
4. Engineering Mechanics Playlist (NEW 2023-2024): ua-cam.com/play/PLIhUrsYr8yHxeypEyVdWeGNxWHjNxU_JP.html
5. Mechanics of Solids Playlist: ua-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html
6. Theory of Machines / KOM / DOM Playlist: ua-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html
7. AUTOCAD Playlist:
ua-cam.com/play/PLIhUrsYr8yHyLArdiiSDLa0Fmz8YKIy7G.html
8. Machine Drawing Playlist: ua-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html
Visit Main Channel Page(@manaspatnaikmech) for Playlists on specific topics.
Second Channel for Hindi Audience: @btechplus
Download the Manas Patnaik App for Premium content : bit.ly/3wMRxoc
@@ManasPatnaikofficial ok thank you so much sir for clarifying my doubt definitely i will share with my friends
1) A cube of 35 mm long edges is resting on the H.P. on one of its faces with a vertical face inclined at 300 to the V.P. It is cut by a section plane parallel to the V.P. and 9 mm away from the axis and further away from the V.P. Draw its sectional front view and the top view.
plz answer it sir
Manasa...This problem is pretty simple thats why i didnot include it in my video library...
And i am sure u can find its solution in ND Bhatts book....
First example from section of solids i believe......
Can u make a theory video on section of solids.....AND I HAVE A ONE MORE DOUBT ACTUALLY WHY HATCHING IS REQUIRED......
sir , plz upload vdo tutorial on sectional orthographics..
I will take your suggestion for future video tutorials...
Please explain the isometric projection
Super diagramming view
Tq very much bro......
Hi Sriramula Srinith........First of all....Thanks for appreciating my work....
I always focus on giving you guys excellent quality free education....
All the best in life and do let your friends know about this channel on drawing and mechanics so that they can also benefit....
Sir How can Show Section line In this?
. A right circular cone, diameter of base 60 mm and height 70 mm, rests on its base on HP. A section plane
perpendicular to HI and inclined at 45 degrees to the VP cuts the cone and is 10 min infront of the axis.
Draw its top view, sectional front view and true shape of the section.
So important video.. Nice explanation...
Sir thank you so much I always recommend all my friends ki if you don't understand ghar jaake manas patnaik ke videos dekho meine sab wahin se sikha hai
My lecturers are zero Infront of Ur knowledge sir.nyc video sir TQ
Thanks for appreciating my work.
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English
1. Orthographic Projection: ua-cam.com/video/WG6H2pISUzQ/v-deo.html
2. Projection of Point: ua-cam.com/video/fK4h5gM73w8/v-deo.html
3. Projection of Line:
OLD:
ua-cam.com/play/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV.html
NEW:
ua-cam.com/video/pzE0D-Ijxd4/v-deo.html
4. Projection of Plane: ua-cam.com/play/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg.html
5. Projection of Solid: ua-cam.com/play/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm.html
6. Section of Solid: ua-cam.com/play/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v.html
7. Development of Surface: ua-cam.com/play/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v.html
8. Auxiliary Plane: ua-cam.com/play/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB.html
9. Interpenetration of Solids: ua-cam.com/play/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM.html
10. Isometric Drawings: ua-cam.com/play/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83.html
11. Conic Sections: ua-cam.com/play/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ.html
12. Cycloidal Curves: ua-cam.com/play/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z.html
13. Involute:
ua-cam.com/play/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa.html
14. Plain Scale and Diagonal Scale: ua-cam.com/play/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9.html
15. Complete Engineering Drawing in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi
1. Orthographic Projection in Hindi: ua-cam.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html
2. Projection of Point in Hindi: ua-cam.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html
3. Projection of Line in Hindi: ua-cam.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html
4. Projection of Plane in Hindi: ua-cam.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html
5. Projection of Solid in Hindi: ua-cam.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html
6. Scales Hindi-Urdu:
ua-cam.com/play/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB.html
Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English
1. Forces:
ua-cam.com/play/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0.html
2. Friction:
ua-cam.com/play/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m.html
3. Shear Force and Bending Moment: ua-cam.com/play/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7.html
4. Trusses:
ua-cam.com/play/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7.html
5. Centroid and Centre of Gravity: ua-cam.com/play/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p.html
6. Moment of Inertia:
ua-cam.com/play/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy.html
7. Dynamics:
ua-cam.com/play/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z.html
8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
How to draw its development?
a cone of diameter of base 50th and axis 50th long long is resting on its base on th HP .It is cut by a section plane perpendicular to the the VP inclined at 75degr to the HP and passing through the apex draw it's front view sectional top view and true shape of the section
Shivkant....your request has been noted..........
tq...sir..
you done a great..job..
your videos are really helpful...
I got more grip on the subject by ur videos.
Thanks for appreciating my work Sandeep....
All the best...
Do tell your friends about this channel so that all of them can benefit....
Hey the auxiliary plane is which I mean AIP or AVP
Is it AVP ?if yes then y not Auxiliary inclined plane(AIP)
How to judge which to take?
Please reply soon
+Thakkar Taniya
Try to read the problem description carefully.....
If the cutting plane is perpendicular to VP and inclined to HP then its an AIP....
And
If the cutting plane is perpendicular to HP and inclined to VP then its an AVP....
Or is it like cutting plane is perpendicular to hp and therefore we use Auxillary vertical plane( AVP )?? Or some other reason?
Manas Patnaik yes got it ty
Why are you draw section view in top???
THank you sir very helpfull from CST bhutan
I am watching this for exam
Me too
Thank you sir for making it too easy
Thanks alot sir
..
Nice sir.thank u
Super sir
I mean I under stand clearly
It's interesting vvvvvery sir you saved me in this semester 2-1
😁
Thank you sir.... You do a better work... The explanation of question is great sir.... All of my friends are learn ED by your channel.... Thanks sir 👍👍
Please arrange the videos in order in the playlist ob the right of the screen
I will surely look into it Abhijay....
@@ManasPatnaikofficial Thank you for your reply sir... regards from IIT KHARAGPUR