Dear tutor I am die hard Friend of your tutorial, if I struggle while I performed a sketch on solid work, your channel is a life life and one way stop about how to solve it. I am requested to you please upload a tutorial about pipenig and routing also Fatigue simulation too. 👏👏👏🙏🙏🙏
Thank you sir for every of your tutorials.appreciate you sir.because of you I am able to learn SW so easily and fast.No words for you again.its being a long journey for you and Congratulations for 50k subscribers. Sir please if possible can you come with ansys,catia ,creo,tutorials one by one in every sector.I think most of the candidates can learn if you extend your support in cad cam and candidates will better learn easily in other softwares to like me and the way you represent.hats off to you sir.
The holes in the cone can't be made in production (not the normal way). The holes are under an angle, when you look from above you won't get a clear circle (in flat pattern)
Hi, great video, thanks! Look, I need to make a plan of a cone like the one you make in the video and put it in a PDF, can you help me with that? Let me know how much it will cost, thanks.
hi i have a question about bend lines my company say to me we need to see bending lines or we can't produce this sheet metal part like this how can i show them ?
I'm having trouble. I'm able to make the cone but the bend notes under assembly drawing isn't showing up. I can see that the bend lines are there though.
Cone development not able to give the dimensions fully why this happening. Example in flattened drawing radius not able to give the dimensions please replay
The technique is useful but the end shape is only approximately conical. The shape on the top surface would not be circular when truncated at an angle, it would be elliptical. The lofted bends command will always work with two open curves but you need to be careful about the actual end shape. More correct would be to make a similar truncated cone but with flat ends made at the longer edge then use the sheet-metal function in the same way and then cut through the sheet-metal-part at the required angle. The part will then be a true cone.
Awesome video! I am doing an exhaust with different profiles, and once i do a surface sweep like in this video, i cannot join this sweep with the next profile, even if both sketches are as shown in this video (open profile). Anyone has an idea why?
I started my Solidworks journey by watching your channel. I am now a CSWE. Thank you Sir.
Your teaching skills are praise worthy. Good to follow. Thanks dear for all your hard work
The best explanation of Lofted Bend which I are seen on the web...You have black belt into Sheet Metal...Thanks
Dear tutor I am die hard Friend of your tutorial, if I struggle while I performed a sketch on solid work, your channel is a life life and one way stop about how to solve it.
I am requested to you please upload a tutorial about pipenig and routing also
Fatigue simulation too.
👏👏👏🙏🙏🙏
Very useful, thank you
Thank you sir for every of your tutorials.appreciate you sir.because of you I am able to learn SW so easily and fast.No words for you again.its being a long journey for you and Congratulations for 50k subscribers. Sir please if possible can you come with ansys,catia ,creo,tutorials one by one in every sector.I think most of the candidates can learn if you extend your support in cad cam and candidates will better learn easily in other softwares to like me and the way you represent.hats off to you sir.
You are an outstanding training resource. Thank you.
Parabéns. Curitiba- Brasil 29/07/2023.
Sir this was very useful Thank you sir, I need to create 1 more part in sheet metal, how can I send the image to you
Amazing quality in description thank you
Thanks,
The holes in the cone can't be made in production (not the normal way). The holes are under an angle, when you look from above you won't get a clear circle (in flat pattern)
Great, teacher!!! Awesome tips! Keep up the good work!!! Hello from Brazil!!!
Wilde do Nascimento Corrêa Correa Thanks
Hi, great video, thanks!
Look, I need to make a plan of a cone like the one you make in the video and put it in a PDF, can you help me with that? Let me know how much it will cost, thanks.
Sir ,please make video tutorial Sheet metal for ECcentric reducer
Very good ...keep up the useful work
hi i have a question about bend lines my company say to me we need to see bending lines or we can't produce this sheet metal part like this how can i show them ?
Sir can you bend in radius example for exhaust expansion chamber.
THANKS MATE
Hi! Could you help me how to unfold cylinder with spiral line(for example gap is 2mm)?
Thank you very much for the video, I need to do a part flatten , and I don't know how to do it on the flaten to attach it to the other views
Could you explain how to add a flange on a curved surface?
Sir a video that
The path fallow the straight line.
Means fisrt circle follw the straight line means it goes through quadrant point not origin
Do some videos on thermal simulation with some practical problems along with hand calculation of results,I mean verification problems
Can you post a video for industry oriented drawings
I'm having trouble. I'm able to make the cone but the bend notes under assembly drawing isn't showing up. I can see that the bend lines are there though.
Danke schön Lehrer
What is your Solidworks version?
잘 보고 갑니다
Cone development not able to give the dimensions fully why this happening. Example in flattened drawing radius not able to give the dimensions please replay
VERY NICE
How flatern cone and divide it into parts
Thank you Sir please make more video.
i will try my level best,
The technique is useful but the end shape is only approximately conical. The shape on the top surface would not be circular when truncated at an angle, it would be elliptical. The lofted bends command will always work with two open curves but you need to be careful about the actual end shape. More correct would be to make a similar truncated cone but with flat ends made at the longer edge then use the sheet-metal function in the same way and then cut through the sheet-metal-part at the required angle. The part will then be a true cone.
Awesome video! I am doing an exhaust with different profiles, and once i do a surface sweep like in this video, i cannot join this sweep with the next profile, even if both sketches are as shown in this video (open profile). Anyone has an idea why?
Thanks for the explanation.
I will be more happy if you could show me how to design a Tri-Lobe Screw
thank you sir good job . we can use that in realati
Thank you !
Hello, can you tell me what kind of graphics card do you use?
Nvidia Quadro K1100 2GB
Thanks alot
Thanks :)
😊😊😊😊😊
Ur a great thank sir
Thank you really much.
Can you do a tutorial for a lancette, its a medical device used to draw blood, please it would be really helpful
Thank you
Sir iske bottom ko flat kese karenge?
Sir can you teach pipe routing.
can you give me the link of design or pdf link for surface and sheet metal work
Would you please draw some truck frame ?
Can u provide me the video of powerplant or any factory
Muito legal
Merci !‼
Thanks
Sir please solidworks cam turning and VMC
obrigado :)
can you please make car seat?
learn slovak with olina let me study i will try,
Sir solidwork cam turning
Thank you for video i want you something please could you open your video's subtitles. UA-cam has such a property
天才
هاد امتحاني عند سلامة نفس الارقام
Hindi me meking