For anyone reading this...Its simple..This device is just a headless/screenless pioneer headunit with dsp...You connect it up just like you would a headunit....Pos-neg..signal..and acc wires....then connect it to the headunit with rca cables...then speaker wires to this dsp unit...Very simple...P.S...the app works with iphone 13 latest ios.
I agree I just wish they would add 1 more channel for the way my system is setup cuz I have a 4 channel setup with seperate mid-bass and midrange channels
Great job! Happy to see Pioneer have an up to date alternative to the top-notch head units like 880prs, 99rs and others. I was about to say they used good sense and built up a remote using radiotransmission instead of IR until I saw the IR receiver extension :/ Still, happy to have this on the market.
Very nice DSP, but looks to be very complicated to setup for your average caraudio enthusist who just wants to listen to good sound quality music coming out of their sound system!!! Then again theirs always other DSP'S that are even more complicated like ROCKFORD FOSGATE'S 3SIXTY.3 DSP!!! I guess with a little research and trial and error eventually you can get the hang of it just like everything else that's envoled in caraudio!!! I haven't decided if I would buy this product just yet, I must research more about it!!! I guess for now I will stick to my PIONEER DEQ-7600 DSP!!! Good video!!! 👍👍👍
@@mikemccabe7124They are easier to operate but the external DSP'S make your music sound a lot better because in my opinion you can tweak them a lot better and more precise to your taste and your desire!!! I guess because I'm a big fan of old school caraudio and because that's what I grew up using since I got into caraudio in 1995!!! Today's stuff and technology is to complicated to tweak at least for me it is!!!! But it's not like it takes a ROCKET SCIENTIST to figure them out so don't get me wrong for saying that!!! 😩😩😩
I have the deq7600 also I was wondering do I integrate before factory amp on 2004 Buick LeSabre custom or can I tap into back factory speaker wire for rca connect for input even though all speakers would be replaced and wired with upgraded power from pioneer gmx A class 920's for mids ????
I connects my iphone to DEQ-S1000A and makes my preference in audio route "car stero" mode and saves it. The moment I disconnect the phone from the DSP the set preference get resets. Is anything missing from my side or is my device working wrongly ?
Is there an installation video of this being done without an aftermarket amp to the speakers? I want to know if I can add this to a 2014 bmw 328i with no problems and full function of the product. Also plan on adding a subwoofer in the trunk while it be compatible with the subwoofer?
I brought it but the output is ver very low.... even my amplifier is on max gain. The direct output of pioneer 6yrs old head unit is more then this DSP... i lost my money on this 🤮 Can u suggest?? Its say RCA out is 4v. But why volume is super low?
I just use an old iPhone no issues.Dont know why these aren't that popular i have because i have a cheap andriod stereo so this makes up for it. For me anyway.I also run it in network mode ill never go back to standard i wish kenwood made one though i love those littel enhancements they have pioneers sux ass before i got this i had a stubby little jvc loaded with all that crap mounted in the back next to my mid amp using the head phone jack as he input. Are these considered dsp"s? They make a massive difference when its on.
Can I get the typical Pioneer HU sound quality on this using high level inputs from factory HU? Also, just planning to use the factory HU as the source, will it save the settings without having to connect your mobile phone all the time?
does it has the capability to act as a band pass filter to filter a certain range or frequency?? its just that am using 4 midrange speakers and want to limit 100Hz
So, do I have to put an aftermarket amplifier between this and my speakers? I thought I heard in the ideo that there is a 14WPC amplifier included. For a small sedan with no crazy sub box that has to be plenty, right?
Help me brother, I ordered a lc2i and it's on its way now. Now I just came across your video and it explains exactly well what I'm going through. Upgraded every components of my factory system except the head unit. Now i ordered the lc2i and is on its way. Can you please help me solve this issue by which one o should go for lc2i or dsp?
The LC2i is a great piece of equipment. Some DSP’s accept high level in so if you plan on ever adding a DSP you may want to consider doing it now and returning the LC2i.
Okay..... so how if my stock head unit don't have rca output? Does that mean I need both devices? If you could please do a audio system installation on a 2019 Jeep Cherokee Latitude. That would be great and I really appreciate you spreading the knowledge.
Hi I have question, I have a jeep grand cherokee with the Uconnect factory radio with what they call the premium audio system. I want to upgrade my sound system and I had picked up a pac audio unit to be able to get the outputs so send into some after market amp. Being that this has two mode the network for when I add those individual amps and the standard mode. Could this be also added to my upgrade or should I got with one or the other and not both? Thanks for your help.
Hello just wondering if you can help ive bought the Pioneer DEQS1000A-I and seem to be getting a huge amount of hiss.. even when my headunit is not connected. its not an digital interference hiss or ground loop it cannot be removed with EQ either.. the signal to noise ratio on the spec is good.. so no idea why its doing it 😞
Hello, I am using the product, I did not have any connection problems in the turkey model samsung a8 2018, the android version is low, but i had a connection problem in samsung's turkey model a33, can you help me?
Anyone know if it can run both the RCA out as well as the speaker level outs at the same time? I would like to use the speaker level outs for small rear fill speakers and the RCA outs to amplifiers for main speakers and sub.
Did you ever got your question answered I’m in a similar situation now January 2023 I want to do run tweeters out of two channels from the pioneer unit and then run RCA’s to run the mid range speakers and the sub woofer through a 4 channel amp I wander what you ended up doing. I will appreciate a response. Thanks.
do you ussually install these before or after a factory amplifier? adding a 4 channel and 2 channel aftermarket amps but wanted to retain the factory amp
In my 2016 Silverado I used a pass through harness and took the signal from after the factory amp at speaker level to feed the DSP then sent the DSP RCA out to dedicated 4 channel for the door speakers and a 2 channel subwoofer amp. I ran all new speaker wires to the doors but could have fed it back into the Metra pass through harness to the stock door speakers if I was using less power.
I am trying to. install this with speaker level inputs. For that I cut the other end of the provided harness and wired them as mentioned. Now I am attaching. the RCA outputs to the AMP in but doing so, if I increase the volume from 5 to 10, the blue light turns red. Please help what. to. do. in this situation. I have honda City. 2018 model from India.
If you play back music via the mixed audio playback capability, playing music through the smartphone app, then yes it will produce the full frequencies.
Pls How can I connect mobile steering wheel control in kia cerato 2006 to pioneer avh p6050? Steering wheel control of music is working but mobile not! How to fix this?
So wait, if it has a function to re-equalize the factory audio to flat then does that mean you could run that same sequence with aftermarket speakers/amps (auto EQ) or is it different? Thanks
so if connecting and using through mode (headhunt playing the music), do you still need to adjust the volume from the pioneer remote or is it done via the stereo?
How well would this work with an Android tablet stereo. I have a Chinese 10 in Android stereo , I love how well it functions but it sounds like and old sparkomatic tape deck. The eq in the stereo is garbage and I've had no luck finding a good one to download to it. This seems like a perfect fix. But what I want to know is can I use the head unit like you would your phone to control the deq and still get the sound signal from it also.
Great review as always!!! One quick question.. when my phone is connected to processor, do the songs i play have to be played from the pioneer app or can i use another app example "power amp"
@@zievs9025 Im reading the manual it seems like it doesnt work without your phone connected to it. Although im not sure if thats the case i think thats a deal breaker for me.
I’ve been using this for almost two years now. While it does greatly improve the sound quality, it’s not very user-friendly and it’s a pain to not have a simple volume control instead of having to use your phone or the remote control they give you to adjust the volume. The remotes buttons are very small and you have to look at it to find the volume control. It has a lot of nice features, but I think the Kicker Key is easier to tune and sounds slightly better.
I don't think it'll work for my Harley-Davidson touring bike however for my car is a different story but I would like to see it be blue toothable so that you don't have to have a wire plugged into it be able to take calls and not interrupt my navigational screen
Global. 31 band EQ for each speaker would be overwhelming and mostly useless, as you would probably not have the ability to hear EQ differences in each speaker anyway.
Sir do u think dsp can gve better sound quality or signal then a good double din stereo.....?? I wanted to add this dsp in my system bt already i hv gt a sony double din stereo if dsp wll make much diiference in sound quality between double din stereo then i shld add bt i want your confirmation
This showed so much promise but relying on OTG made it obsolete for newer android phones and pioneer seems to have completely bailed out on car audio dsp.
Is there any after market stereo built in dsp like that? I think if its built in stereo it would be more compact. This dsp is garbage if I want more good sound audio control has built in dsp amp is more effective than this.
Dos detalles que no me gusta mucho es que con teléfonos Android a veces da dolor de cabeza para detectarlo ya que necesita cable otg, la otra no se puede controlar con una PC. Del resto el sonido es muy bueno.
@@Guiririro14 Hace tiempo lo hice, baje el tono y lo hizo, si me acuerdo que me dio error varias veces, algo del micrófono, pero al final de tanto insistir lo hizo
@@rochulcr que tal! Ya lo descubri,y espero a otras personas le sirva. Para poder calibrarlo es necesario subir el volumen al autoestereo,a 3/4 de potencia!
@@Qualitymobilevideo .i wonder the setting are not being save as ive tune .they go back to normal as i plug out the cellphone from the cable the settings become normal again hope ull show how this dsp save all the settings
i hate this thing. i have it and you need to connect your iphone to it at all times. the volume buttons are touch screen and can be really annoying. when you unplug the phone from the unit, the tuning stops and does not stay
It's NOT a good option for modern cars with integrated headunit. I've fitted on my bmw e60, and this DSP has just 2 channel imput, so you need to sacrifice either rear or front channel from your vehicle. This means You will lose the information from unused channels. Parking sensors, all other chimes will disappear. ... Unless you tell us how to merge all 4 channels into 2 channels. I'm very unhappy with this, but what should I expect from the cheapest dsp on the market? Another shitty thing is that you can't play songs from Spotify or any other source, only from the pioneer app.... NO AUXILIARY INPUT, no Bluetooth as well. Any other suggestion how to link all 4 channels into this dsp?
Wow sounds like you need a better head unit .. Munes standard Ford but has all features just needs sound tuning but use your front full range speakers then thoes unit Will give you 4way plus sub.. but if you have more etc then buy 2 or another unit from audio control at more money
you pretty much need two phones for this thing. The app won't connect to the DSP with phones newer than early 2018. I had to dig out an old Galaxy S5 to basically be the GUI for this thing and use my modern Galaxy S10 as the actual phone to the OEM system for streaming and phone calls or whatever else I'm doing via bluetooth.
@@TickleFingers that's what I want to see a comparison video on because I was going to order that same Dayton unit and prob still am but it would be cool to see a video comparison
@@hectorortega9131 low gain factor despite the 4 volt advertised, high noise on high level input from factory head unit, does not work with android phone newer than early 2018, the app crashes constantly, the layout is horrible, you can't use the phone running the app to input the test tone for self calibration and it has no bluetooth connectivity. did I miss any?
For now I'm living with the dsp1000 but I may swap it out for a Metra Axxess next summer. Usually love Pioneer car audio but this seems like a half assed attempt by them and they aren't addressing the app issues.
@@raptuous oh wow, yes, thats what i was reading on the pioneer app Comments, quite some complaints about the app crashing and being slow too.. Thats putty sad for pioneer..
For anyone reading this...Its simple..This device is just a headless/screenless pioneer headunit with dsp...You connect it up just like you would a headunit....Pos-neg..signal..and acc wires....then connect it to the headunit with rca cables...then speaker wires to this dsp unit...Very simple...P.S...the app works with iphone 13 latest ios.
I'm curious do I actually need a head unit for this to work
@@ronirome2566 It needs a receiver/ radio
Very thorough explanation of this product, great job as always!
Thanks man!
I agree I just wish they would add 1 more channel for the way my system is setup cuz I have a 4 channel setup with seperate mid-bass and midrange channels
Just because I saw your logo I subscribed to this channel. Thanks big dummy 😊
Great job!
Happy to see Pioneer have an up to date alternative to the top-notch head units like 880prs, 99rs and others.
I was about to say they used good sense and built up a remote using radiotransmission instead of IR until I saw the IR receiver extension :/
Still, happy to have this on the market.
80 prs without the tuner I like it.😎
I want to put this in my 2015 Honda Accord Sport. I love Pioneer, and I really love Pioneers new line of equipment.....
Very nice DSP, but looks to be very complicated to setup for your average caraudio enthusist who just wants to listen to good sound quality music coming out of their sound system!!! Then again theirs always other DSP'S that are even more complicated like ROCKFORD FOSGATE'S 3SIXTY.3 DSP!!! I guess with a little research and trial and error eventually you can get the hang of it just like everything else that's envoled in caraudio!!! I haven't decided if I would buy this product just yet, I must research more about it!!! I guess for now I will stick to my PIONEER DEQ-7600 DSP!!! Good video!!! 👍👍👍
How have u liked ur decks built in dsp?
@@mikemccabe7124They are easier to operate but the external DSP'S make your music sound a lot better because in my opinion you can tweak them a lot better and more precise to your taste and your desire!!! I guess because I'm a big fan of old school caraudio and because that's what I grew up using since I got into caraudio in 1995!!! Today's stuff and technology is to complicated to tweak at least for me it is!!!! But it's not like it takes a ROCKET SCIENTIST to figure them out so don't get me wrong for saying that!!! 😩😩😩
I have the deq7600 also I was wondering do I integrate before factory amp on 2004 Buick LeSabre custom or can I tap into back factory speaker wire for rca connect for input even though all speakers would be replaced and wired with upgraded power from pioneer gmx A class 920's for mids ????
I just want to use it for the sound modes lol them process deq expensive now a day wonder if this would still do
The unit is connected to my car but shows a solid red power light. And when I try to connect my phone I get an error code
I connects my iphone to DEQ-S1000A and makes my preference in audio route "car stero" mode and saves it. The moment I disconnect the phone from the DSP the set preference get resets. Is anything missing from my side or is my device working wrongly ?
I hve gt two amp 4 channel amp to run 4 speaker and one mono to run subs..... so which mode should i use network mode or standard mode
i have duster 2015 with OEM stereo and speakers. Will a DSP without Amplifier be useful in enhancing sound clarity?
Hi am using pioneer deq s-1000a after disconnecting phone sound quality comes to normal, why it doesn’t save settings even after sync?? Thanks
If they can built this with a very low end amp, why not have these dsp built in on some of the mainstream 4 channel with higher wattage instead.
Is there an installation video of this being done without an aftermarket amp to the speakers? I want to know if I can add this to a 2014 bmw 328i with no problems and full function of the product. Also plan on adding a subwoofer in the trunk while it be compatible with the subwoofer?
hello , HELİX DSP MİNİ OR Pioneer DEQ-S1000A DSP wich one is better ? sound quality , can you help me ?
They need to make a single din visual equalizer like the old school ones
Sehr gute Erklärung!
Sehr gutes Produkt!
I brought it but the output is ver very low.... even my amplifier is on max gain. The direct output of pioneer 6yrs old head unit is more then this DSP... i lost my money on this 🤮
Can u suggest?? Its say RCA out is 4v. But why volume is super low?
Hi sir,No sound from spotify when in "other app"mode my telephone s21 ultra
Is this supports for old factory BMW head units? The once which have CD, Cassatt etc only
If one has a pioneer head unit , using this product does it help?
I just use an old iPhone no issues.Dont know why these aren't that popular i have because i have a cheap andriod stereo so this makes up for it. For me anyway.I also run it in network mode ill never go back to standard i wish kenwood made one though i love those littel enhancements they have pioneers sux ass before i got this i had a stubby little jvc loaded with all that crap mounted in the back next to my mid amp using the head phone jack as he input. Are these considered dsp"s? They make a massive difference when its on.
Can I get the typical Pioneer HU sound quality on this using high level inputs from factory HU? Also, just planning to use the factory HU as the source, will it save the settings without having to connect your mobile phone all the time?
does it has the capability to act as a band pass filter to filter a certain range or frequency?? its just that am using 4 midrange speakers and want to limit 100Hz
Yes, can do dual channel full active
Interesting. It is possibel to run it at Home as a classic aktiv 3 way Crossover? 🤔
Technically yes but there are better solutions, look up parts express DSP
@@Qualitymobilevideo thank you for the Suggestion 👍
So, do I have to put an aftermarket amplifier between this and my speakers? I thought I heard in the ideo that there is a 14WPC amplifier included. For a small sedan with no crazy sub box that has to be plenty, right?
Help me brother, I ordered a lc2i and it's on its way now. Now I just came across your video and it explains exactly well what I'm going through. Upgraded every components of my factory system except the head unit. Now i ordered the lc2i and is on its way. Can you please help me solve this issue by which one o should go for lc2i or dsp?
The LC2i is a great piece of equipment. Some DSP’s accept high level in so if you plan on ever adding a DSP you may want to consider doing it now and returning the LC2i.
Okay..... so how if my stock head unit don't have rca output? Does that mean I need both devices? If you could please do a audio system installation on a 2019 Jeep Cherokee Latitude. That would be great and I really appreciate you spreading the knowledge.
I cant get it to work with android only ios says i need otg cable nut stiil doesnt want to work
Do I need this if I already have DMH-Z5290bt?
Does the app work with bluetooth?
Could you please advice me on the best 12" infinite baffle sub woofer?
Hi I have question, I have a jeep grand cherokee with the Uconnect factory radio with what they call the premium audio system. I want to upgrade my sound system and I had picked up a pac audio unit to be able to get the outputs so send into some after market amp. Being that this has two mode the network for when I add those individual amps and the standard mode. Could this be also added to my upgrade or should I got with one or the other and not both? Thanks for your help.
When can we expect to see the install video????
We will be doing the install this week, video sometime next week.
@@Qualitymobilevideo when is it available to buy and ship
@@mikemccabe7124 Mike it is available now: www.qualitymobilevideo.com/deq-s1000a.html
How is the sound out put .n can you show the installation method
Hello just wondering if you can help ive bought the Pioneer DEQS1000A-I and seem to be getting a huge amount of hiss.. even when my headunit is not connected. its not an digital interference hiss or ground loop it cannot be removed with EQ either.. the signal to noise ratio on the spec is good.. so no idea why its doing it 😞
Hello, I am using the product, I did not have any connection problems in the turkey model samsung a8 2018, the android version is low, but i had a connection problem in samsung's turkey model a33, can you help me?
It is likely an phone issue, we have have not had this issue.
@@Qualitymobilevideo Is there any setting I need to do on the phone?
Anyone know if it can run both the RCA out as well as the speaker level outs at the same time? I would like to use the speaker level outs for small rear fill speakers and the RCA outs to amplifiers for main speakers and sub.
Did you ever got your question answered I’m in a similar situation now January 2023 I want to do run tweeters out of two channels from the pioneer unit and then run RCA’s to run the mid range speakers and the sub woofer through a 4 channel amp
I wander what you ended up doing. I will appreciate a response. Thanks.
@@456Pegasus1 Did you get it to work that way? Or is it RCA only?
Can you use this with built in Ford Focus 2015 speakers ?
do you ussually install these before or after a factory amplifier? adding a 4 channel and 2 channel aftermarket amps but wanted to retain the factory amp
In my 2016 Silverado I used a pass through harness and took the signal from after the factory amp at speaker level to feed the DSP then sent the DSP RCA out to dedicated 4 channel for the door speakers and a 2 channel subwoofer amp. I ran all new speaker wires to the doors but could have fed it back into the Metra pass through harness to the stock door speakers if I was using less power.
Is this like the old school pioneer carrozzeria?
I wish this has a subwoofer input so we can use the subwoofer volume on our head units.
What the difference between dsp and pre amp???
Does effects work on all audio route mode?
Other than the Time Alignment I wouldn't waste money on this DSP. There are andorid EQ aplications that can perform better and with Parametric EQ
Does it work with a double din pioneer
I am trying to. install this with speaker level inputs. For that I cut the other end of the provided harness and wired them as mentioned. Now I am attaching. the RCA outputs to the AMP in but doing so, if I increase the volume from 5 to 10, the blue light turns red. Please help what. to. do. in this situation. I have honda City. 2018 model from India.
I can't find information speaker level input. Is there left and right? Left right and subwoofer high level inputs? Thanks
only two channel left and right full frequency signal high level inputs or two channel RCA left and right full frequency line level input.
What happens if you're not using component speakers? I have two sets of coaxial speakers in my front and rear doors...
it takes two channel in from the factory head unit or smart phone and outputs four channel plus two subwoofer channels when run in standard mode
Would this have the presets like the old alpine era-g20
do you have a video of network mode on deq1000
So does this produce frequencies that a factory head unit may diminish or eliminate? Like below 40hz
If you play back music via the mixed audio playback capability, playing music through the smartphone app, then yes it will produce the full frequencies.
Pls
How can I connect mobile steering wheel control in kia cerato 2006 to pioneer avh p6050?
Steering wheel control of music is working but mobile not! How to fix this?
So wait, if it has a function to re-equalize the factory audio to flat then does that mean you could run that same sequence with aftermarket speakers/amps (auto EQ) or is it different? Thanks
yes but you can't use the phone running the DSP as a source unit. I haven't found any convenient way to run with out having two phones.
I like this thing.
AMAZING SIR
so if connecting and using through mode (headhunt playing the music), do you still need to adjust the volume from the pioneer remote or is it done via the stereo?
Still via stereo, the volume on the dsp is to control your gain (loudness before it distorts)
How well would this work with an Android tablet stereo. I have a Chinese 10 in Android stereo , I love how well it functions but it sounds like and old sparkomatic tape deck. The eq in the stereo is garbage and I've had no luck finding a good one to download to it. This seems like a perfect fix. But what I want to know is can I use the head unit like you would your phone to control the deq and still get the sound signal from it also.
Good question about Android radio connection
Great review as always!!! One quick question.. when my phone is connected to processor, do the songs i play have to be played from the pioneer app or can i use another app example "power amp"
Unfortunately, to utilize your custom EQ you have to play through the Pioneer app :(
@@Qualitymobilevideo does this mean you cant save the eq? So i cant play songs using the dsp eq through the car aux?
@@zievs9025 Im reading the manual it seems like it doesnt work without your phone connected to it. Although im not sure if thats the case i think thats a deal breaker for me.
I’ve been using this for almost two years now. While it does greatly improve the sound quality, it’s not very user-friendly and it’s a pain to not have a simple volume control instead of having to use your phone or the remote control they give you to adjust the volume. The remotes buttons are very small and you have to look at it to find the volume control. It has a lot of nice features, but I think the Kicker Key is easier to tune and sounds slightly better.
@@RealAmericanHero420 greetings! Could you please tell, is it possible to use UA-cam music / Spotify with this Pioneer app?
It has all I need apart from 14W RMS 😞
I don't think it'll work for my Harley-Davidson touring bike however for my car is a different story but I would like to see it be blue toothable so that you don't have to have a wire plugged into it be able to take calls and not interrupt my navigational screen
so it does have a 31eq for each speaker or was it just a global 31???
Global. 31 band EQ for each speaker would be overwhelming and mostly useless, as you would probably not have the ability to hear EQ differences in each speaker anyway.
@@michaelfeliciano5731 mate if a couple of 31bands are over whelming for u i feel for ya bro, and i 100% could hear the difference in each speaker!
I don't like the fact there's 2 only inputs and not 4 and losing control of the back speakers, you losing the acoustic sound in the vehicle
2 way crossover network mode and 3 way crossover network mode
Sir do u think dsp can gve better sound quality or signal then a good double din stereo.....?? I wanted to add this dsp in my system bt already i hv gt a sony double din stereo if dsp wll make much diiference in sound quality between double din stereo then i shld add bt i want your confirmation
This DSP will get better audio than most stereos
@@Qualitymobilevideo thnk u for your concern and also i want clear boomy loud baas.... hope this dsp wll take my system to the next level
A real mess to connect with that processor. Tried few phones but still can't connect. Has never been able to connect to it since installed.
Good
Is there any purpose to using this if I’m already going to get an aftermarket pioneer head unit?
Of course! This will improve the audio in both factory and aftermarket systems
@@Qualitymobilevideo Hello, thanks for the video. How do you connect an AFTERMARKET Pioneer head unit to the DEQ-S1000A?
Awesome.
Hi..sir...what does mean of code #508
This kind of DSP seems good.
My question is this DSP available with 3d and reverb setting ????
Please anybody can guide me.....
Open air and concert Hall is going to give you the sound you looking for.
@@jermainerobbins thanks sir,
I am expecting one of proper dsp.
will you help me for find out one sir ??
This showed so much promise but relying on OTG made it obsolete for newer android phones and pioneer seems to have completely bailed out on car audio dsp.
Yea it did have promise but that was a serious flaw!
Is there any after market stereo built in dsp like that? I think if its built in stereo it would be more compact. This dsp is garbage if I want more good sound audio control has built in dsp amp is more effective than this.
That's nice
Wake me when he is done.😪😪 (the soft jazz, did it)
nice
Dos detalles que no me gusta mucho es que con teléfonos Android a veces da dolor de cabeza para detectarlo ya que necesita cable otg, la otra no se puede controlar con una PC.
Del resto el sonido es muy bueno.
Como hizo para calibrar fuente con el tono? A mi me marca error 506😢
@@Guiririro14 Hace tiempo lo hice, baje el tono y lo hizo, si me acuerdo que me dio error varias veces, algo del micrófono, pero al final de tanto insistir lo hizo
@@rochulcr que tal! Ya lo descubri,y espero a otras personas le sirva. Para poder calibrarlo es necesario subir el volumen al autoestereo,a 3/4 de potencia!
@@Guiririro14 Excelente muchas gracias
If I connect iPhone to factory head unit, will I be able to adjust EQ from phone ? or it always need to be connected to this processor ?
It has to be connect, major flaw IMO
@@Qualitymobilevideo it also doesn't support Android versions later than early 2018.
How change language
Why when I change music mode it only stays on through also it says cannot operate while driving
dee vick ...i have same quetion.
mansoor momin buy the bypass for the parking brake
dee vick ...ok. Thanks
When are you going to install
Hopefully this week!
@@Qualitymobilevideo .i wonder the setting are not being save as ive tune .they go back to normal as i plug out the cellphone from the cable the settings become normal again hope ull show how this dsp save all the settings
Kitne ka hai ye
Didn't see a digital input must have not thought of everything
What to do whan it say can’t operat while driving.
mansoor momin u have to get a bypass cord for the parking brake
dee vick ok.....thanks
Whaaaaaaat!😮
so this is basically a mech less deck that you hide
Yup..headless headunit..but with dsp.
i hate this thing. i have it and you need to connect your iphone to it at all times. the volume buttons are touch screen and can be really annoying. when you unplug the phone from the unit, the tuning stops and does not stay
It's NOT a good option for modern cars with integrated headunit. I've fitted on my bmw e60, and this DSP has just 2 channel imput, so you need to sacrifice either rear or front channel from your vehicle. This means You will lose the information from unused channels. Parking sensors, all other chimes will disappear. ... Unless you tell us how to merge all 4 channels into 2 channels. I'm very unhappy with this, but what should I expect from the cheapest dsp on the market? Another shitty thing is that you can't play songs from Spotify or any other source, only from the pioneer app.... NO AUXILIARY INPUT, no Bluetooth as well. Any other suggestion how to link all 4 channels into this dsp?
Wow sounds like you need a better head unit .. Munes standard Ford but has all features just needs sound tuning but use your front full range speakers then thoes unit Will give you 4way plus sub.. but if you have more etc then buy 2 or another unit from audio control at more money
you pretty much need two phones for this thing. The app won't connect to the DSP with phones newer than early 2018. I had to dig out an old Galaxy S5 to basically be the GUI for this thing and use my modern Galaxy S10 as the actual phone to the OEM system for streaming and phone calls or whatever else I'm doing via bluetooth.
No channel eq = waste of time and money...... Try again pioneer.
The price point on this is unbeatable!
@@Qualitymobilevideo Dayton Audio DSP 408 is $150 and has more functionality.
@@TickleFingers that's what I want to see a comparison video on because I was going to order that same Dayton unit and prob still am but it would be cool to see a video comparison
@@TickleFingers 250$
Wowwwww 14 whole watts RMS?? NO WAY! lol gtfo here with that shit lol
Lol it's a DSP! Not an amplifier bro
Honestly this thing looks annoying.
Weak
I agree
Don't buy it's a waste of money and time
Why do say that?
@@hectorortega9131 low gain factor despite the 4 volt advertised, high noise on high level input from factory head unit, does not work with android phone newer than early 2018, the app crashes constantly, the layout is horrible, you can't use the phone running the app to input the test tone for self calibration and it has no bluetooth connectivity. did I miss any?
@@raptuous really!. That Sucks!.
Thanks for your input. APricciated.
For now I'm living with the dsp1000 but I may swap it out for a Metra Axxess next summer. Usually love Pioneer car audio but this seems like a half assed attempt by them and they aren't addressing the app issues.
@@raptuous oh wow, yes, thats what i was reading on the pioneer app Comments, quite some complaints about the app crashing and being slow too..
Thats putty sad for pioneer..