The reason your bed mesh is screwed up is because of the carbon fiber extrusion not mitigating the linear rail warping as the printer heats up. It's not your bed, it's the x axis. You can use a single mgn9 to save weight but use an aluminium extrusion.
yup Euclide is the way to go no problem of melting Probe anymore... You should also go with umbilical cable. with canbus Ebb36 you will be able to remove all those cables. and chain accept the one for AB motor. Run the endstop sensorless... it work well also. Good job BTW really nice voron
Canbus sounds great, I really want the voron to have a horizontal top mounted x axis linear rail like the vzbot. Not a fan of this front mounted linear rail
Bed mesh is different. I'd say it's worse. A 0.25mm variation over 350mm bed is acceptable for me. Where the variation comes from I cannot figure out. With a 5x5 mesh it prints perfectly I run the machine at moderate speeds, 1k-4k acceleration 150mm infil 100walls All upgrades are for fun and reliability. All the mods I think can be found on the voron GIT user mods
The reason your bed mesh is screwed up is because of the carbon fiber extrusion not mitigating the linear rail warping as the printer heats up. It's not your bed, it's the x axis. You can use a single mgn9 to save weight but use an aluminium extrusion.
yup Euclide is the way to go no problem of melting Probe anymore... You should also go with umbilical cable. with canbus Ebb36 you will be able to remove all those cables. and chain accept the one for AB motor. Run the endstop sensorless... it work well also.
Good job BTW really nice voron
Canbus sounds great, I really want the voron to have a horizontal top mounted x axis linear rail like the vzbot. Not a fan of this front mounted linear rail
Nice work bud!
loved the video can you tell me what the fans under your bed are for?
You want chamber fans to even out the temperature in your chamber.
But whats the point? Is she faster or are the prints better now?
Or just upgrading it for fun?
I like those latches! got a link? :)
Bed mesh is different. I'd say it's worse. A 0.25mm variation over 350mm bed is acceptable for me.
Where the variation comes from I cannot figure out.
With a 5x5 mesh it prints perfectly
I run the machine at moderate speeds,
1k-4k acceleration 150mm infil 100walls
All upgrades are for fun and reliability.
All the mods I think can be found on the voron GIT user mods
Hadn't seen the panel snap latches - got a link to those?
Just added to the description
Please flip those cable chains around... they're supposed to lay flat and straight. Not be all loopy in the air.
its any better the 1mgn12 over 2xmgn9?
I like the Mgn12 as it's a larger linear rail and seems to have better tolerances when under load or pressure.
Hello, what's a Ulysses's probe?
euclidprobe.github.io/
i am still using my semi melted Induction Probe I really like it and it works very well. with a good solid MGN12 rail.