15mm front is what we do, customer chose to do 15mm rear where we personally prefer a 12mm. Of course for the customer who knows what they’re after we can supply any combo, but for those that don’t, our stance kit is the ideal thing to get your G82 M4 sitting nicely.
have you heard how effective the MSS springs are on the F Pace SVR application-same enhancement to ride comfort as on the BMWs? I have MSS on my X5, but can't find any reviews on the SVR? Thanks-enjoy your channel!
Does this same kit fit the G80 M3 ? Love the stance and would love my M3 to fit very similar! The front springs and rear spacers alone don’t sit down as flush as I like. Aiming for a stance like this @evolve automotive
I've always been a hater of the M4, but I guess I just haven't seen enough lowered and spaced out G82's yet, cause this looks fantastic, and the G80 CSL style taillights just don't look right compared to G82 CSL taillights
Why have you changed up the install procedure from what you were doing before when you undid the strut nut and just lowered the front hub while leaving the strut mounted?
Yes, we have done top speed events with spacers. As long as they are high quality parts there is no issue. And like always check your wheel bolt torques before competition use.
I’m not sure what you mean by cope? As said in the video the comfort level is a little stiffer and when lowered you need to slow down a bit more for any kind of obstacle like a speed bump
What an improvement on the stance
Ride height is on point, spacers complete the look, great work Evolve.
I love working with a team Evolve Automotive always 💯
Excellent demonstration of the impact some relatively simple mods can make on the car's visual impression.
That is a perfect drop! Good job Evolve!
Lowered the altitude & raised the attitude!👌
Nice job by Aston & Hash👍
Looks fucking awesome, perfect stance
Another great video Imran love the content hope to see more project cars and longer videos.from you all.
Yes!
Sits perfect gonna order this for my G80 M3
G80s sit a little different and need a different spring setup, but drop us an email on sales@evolveautomotive.com!
Fantastic service! 👏👌
Super clean
Customer was right, going 15mm in the front is perfect.
15mm front is what we do, customer chose to do 15mm rear where we personally prefer a 12mm.
Of course for the customer who knows what they’re after we can supply any combo, but for those that don’t, our stance kit is the ideal thing to get your G82 M4 sitting nicely.
@@EvolveAutomotive Do you get any rubbing with 15mm up front and lowered?
Amazing ❤
Thanks
Top video. Looks insane.
have you heard how effective the MSS springs are on the F Pace SVR application-same enhancement to ride comfort as on the BMWs? I have MSS on my X5, but can't find any reviews on the SVR? Thanks-enjoy your channel!
need more vids on the M4 CSL!!!
15mm front & 12mm rear is perfect or you can also do 16mm front & 13mm rear. I tried both on my g80, and you can’t go wrong with either one.
Does this same kit fit the G80 M3 ? Love the stance and would love my M3 to fit very similar! The front springs and rear spacers alone don’t sit down as flush as I like. Aiming for a stance like this @evolve automotive
Hi Ben, drop us an email on sales@evolveautomotive.com and we can do you something very similar.
@@EvolveAutomotive just shot an email over!
I've always been a hater of the M4, but I guess I just haven't seen enough lowered and spaced out G82's yet, cause this looks fantastic, and the G80 CSL style taillights just don't look right compared to G82 CSL taillights
What’s the safest way to lower the car whilst keeping the EDC on functioning perfectly with no risk to be damaged
This retains full EDC functionality.
@@EvolveAutomotive I have a M3cs f80 what evolve spring can you guys recommend to lower it and I’m from south Africa
Drop us an email on sales@evolveautomotive.com ✌🏻
I get the exact same care 😍 do the 15mm and 12 fit without further modification? I always read that 11mm is max? Thx. Nice video. ❤
15/12 work fine with this setup. Usual G8X arch liner modification is all that’s needed.
@@EvolveAutomotive thx 🙏
will scrape bottom...hate that
Why have you changed up the install procedure from what you were doing before when you undid the strut nut and just lowered the front hub while leaving the strut mounted?
You cannot do this on an xDrive, the driveshaft means the entire strut must be removed.
God btw really should’ve paint matched the side skirts, front bumper splitters and rear diffuser!
Just realised how much like the 8series this looks
no
Do u guys have any plans of doing an i4 m50 build?
No plans to do one ourselves but we can offer parts for them.
U guys do have parts for the i4? im wondering if there is a grille replacement for it. @@EvolveAutomotive
If I may ask, Is it safe to drive at high speeds with spacers?🤔
Yes, we have done top speed events with spacers. As long as they are high quality parts there is no issue. And like always check your wheel bolt torques before competition use.
How do the springs cope over speed bumps versus stock??
I’m not sure what you mean by cope? As said in the video the comfort level is a little stiffer and when lowered you need to slow down a bit more for any kind of obstacle like a speed bump
The stock car will occasional scrape over a speed bump!
Evolve website says their springs dont fit m4 comp xdrive
No it doesn’t? We developed them on our xDrive
Slightly too low for me, but customer is king 👍
Eibachs are a good choice if wanting a more subtle drop
Weeeeeeeepa🎉
What watch is Imran wearing? @3:46
Defy Extreme Felipe Pantone Limited Edition 45mm Mens Watch, I think! Good choice if I’m not wrong
A tad too low for my taste. Personally I feel 12mm spacers all round is the way to go
Why don't BMW do this from the factory? Must be some downsides
Put it in reverse and it rubs for sure
Yes, like pretty much any amount of lowering + spacers. We trim the arch liner for customers.
You drive like granny mate..
Your mum