This guy is so smart!! I went to automotive school for 2 years and don’t have jack on this guy!! Fantastic series! I hope you all the success here on UA-cam because you’re so deserving! 👍👍
This series just showed up in my recommendations yesterday, I watched a few of the 212cc videos. Will be catching up over the next few days. Subscribed!
The level of workmanship and craftsmanship in this project is very pleasing. Kind of like those "oddly satisfying" compilations I see people sharing on facebook.
I saw an insight at Home Depot earlier today (it looked like a toy parked next to a F250 🤣 btw). Thought of this one, and daydreamed for a solid 2 minutes about it being Predator 670 powered 🤣
Don't want to say it's jealousy that stirs in me when I watch your content but you've got every tool and component to build whatever engine you desire. What a dream. Outstanding work and it makes for some very entertaining content. Thank you.
This car is coming along nice! I appreciate your efforts on such a unique project. I want to note your choke setup - I thought I was the only one who went down such a road. I put a 196cc electric start clone engine on a gokart project recently, and added a remote choke setup as well. I got the Honda kit meant for a gX160 and it fit like a glove. I then got a cable off Amazon, but I reckon it's the same one at a local auto part shop too. It's amazing how handy that remote choke is!!
Came across this series after watching some mechanical fails compilations, the spirit is about the same but quality is astronomically higher!!! Subscribed for sure
I started washing your channel today! I really like the way you show your progress! Can't wait for more updates. I subscribed already! Best regards from Portugal! ;)
Studz racing has custom exhaust kits that are super easy to build, made mine 42” long and added an akrapovic street bike muffler, length helps immensely with scavenging effect as my cam has a ton of duration, the custom exhaust and a long custom intake made from emt conduit, really woke it up!!
I love your projects but, a little bit of advice. Don't weld for long periods of time without gloves. One time I had a few beers and started welding out in the garage without gloves or long sleeves. The next day I had horrible sunburn on my arms from the uv rays. Just some friendly advice from someone who already made that mistake. 🙂
you sir are one of my top 3 youtubers. ITs a 3 way tie between you(Robot Cantina), This old Tony and Styropyro. Did you guys go to the same Sarcastically Snarky UA-cam Academy ? Your Shtick is perfect !!!!
What a ride. Started from the very first video in this series yesterday, and when I was supposed to be working today, I caught up. This is awesome work and I can't wait to see more.
A little tip! The section under the car was a little blurry. You can fix this with a higher shutter speed. Usually this causes a slower video but you brought a light down there which is perfect. If you wanna reduce motion blur in the hand held sections, same applies. This should make the paused video look way better :)
If you reach a goal of HIGHWAY 55 MPH using a Honda lawn-mower engine, the car companies should reward you with an Engine Research contract. 😉 Great achievements andterrific videos. I'll never kick my lawn-mower engine again. Thanks.
Just stumbled on this channel today. Hilarious project man, and well done. Was shocked you didn't have more subs, as this is very well made. Also realized you're from Michigan too lol. Hello from GR lol. Look forward to more!
You said the pipe fit the flange, but it fit inside? Did that match the output from the head? A step to a bigger ID is actually good for a header flange for lower rpm power, but if it's choked down that's worse case scenario.
First time I was sad that the show was filmed recently. I am desperate to see this baby on the road! Love your channel. Huge fan. Keep up the good work!
Hey, nice video series! Did you thought about these kits to go from carburator to injector? There you got ecu and all the stuff to tune the engine with timing and fuel etc. Then you maybe can turbocharge the engine easier for more performance 👍🏼
Another nice one! My only complaint is that since I’ve started watching your series that you tube is giving me mostly suggested videos regarding Honda insights! I don’t care about Honda insights! But you’re doing some really neat stuff with a street legal go cart and putting it in a superb video. You’re like a G rated AvE with music! That’s a compliment.
... your next iteration of the car should have a HONDA lawnmower engine... gotta make sure you add VTEC to it for the ULTIMATE EXPERIENCE! 👌... I love it! Keep it up 👊
No!!! I really want to see how this thing does. Can’t wait for the next episode. I’ve bing watched this project from the beginning in the last 24 hours.
Omg please dont tell me these series are over. I've spent the last month and alot of money on beer watching these after work. I refused to benge watch because I wanted it to last lol. Your channel is one of the best on youtube. Great entertaining content. I even have my 13 year old son who wants to be an engineer watching it. I know I know a damn engineer he promised me he would make shit easier in the future though LMAO. Hahaha
More videos are in the works right now. Expect the next one in a few days. I plan on do as many engine swaps as I can, hopefully someday I'll actually make some money doing this. Stay tuned!
@@robotcantina8957 "Almost everything will work again if you unplug it for a few minutes…Including you." - Thanks for these videos Jimbo. Take care of yourself.
CONGRATULATIONS JIMBO.. over 100k subscribers! 👍👍 ROBOT CANTINA
continues to provide the entertainment and fun that viewers enjoy!
This guy is so smart!! I went to automotive school for 2 years and don’t have jack on this guy!! Fantastic series!
I hope you all the success here on UA-cam because you’re so deserving! 👍👍
CONGRATULATIONS JIMBO.. over 100k subscribers! 👍👍 ROBOT CANTINA
continues to provide the entertainment and fun that viewers enjoy!
@@ocdman202 "People who achieve the greatest success are the people who have the most fun getting there."
Never been so disappointed to see snow in my life. Really enjoying this series can’t wait to see that baby in action!
I just started binge watching this earlier today
This series just showed up in my recommendations yesterday, I watched a few of the 212cc videos. Will be catching up over the next few days. Subscribed!
Me too, binge watched it 2 days ago.
Same😂😂
Me too, just showed up in my recommendations
Same!
You are blowing up recently! I just got this series recommended to me yesterday and completely caught up.
Same, with how UA-cam is recommending this to us I can tell he is about to blow up
Same
Anyone watch Moore Motorsports (spray painting cars) or Texas Honda Channel. I feel like that is why I was recommended this channel.
Quality content here. This channel will hit 100k real soon I’d bet
Same here,love this type stuff
The level of workmanship and craftsmanship in this project is very pleasing. Kind of like those "oddly satisfying" compilations I see people sharing on facebook.
I laugh out loud every time you edit in a vintage Windows error sound. This is what automotive UA-cam should be like. A+
Vintage? I'm literally playing Civ2 on a 486 (Windows 3.11) while watching this ;)
"420 Hemi big block" definitely sounds like something that was on a 70s dodge, just don't say its 420cc not 420cui.
the 426 Hemi was an iconic engine from the 60's and early 70's . This 420 is a real Hemi, but as you know its in cc
Yeah, it has 420 cubes of freedom under the hood
@@robotcantina8957 Can you overbore this engine? You know, to get it to 426cc? 😂
@@robotcantina8957 just 16.39 time difference. Nobody will notice
@@laurean5998 only thing as good is 420 grams of freedom
Straight up engineering wizardry!
I would like to see the look on the face of the mechanic who does the state inspection when he/she opens the hood for the first time.
Film it! Film it!!!
Yes this would be funny af 😂😂😂
No state inspection in Michigan.
In Michigan they don't care. Nobody ever checks your car but you
Pure Michigan baby
I got this channel reccomended to me a couple days ago. I think the algorithm™ has noticed your quality content
Glad you enjoy it!
I was surprised how few subscribers he has. His content is one of the best. I hope that the algorithm is generous!
Found this today, awesome watch. Can't wait for the first drive!
I saw an insight at Home Depot earlier today (it looked like a toy parked next to a F250 🤣 btw). Thought of this one, and daydreamed for a solid 2 minutes about it being Predator 670 powered 🤣
I got the worst case of blue balls in the history of mankind... All jokes aside, I can’t wait to see it on the street man!
Itd actually why it got the downvote. Didnt find the race comparision video but he got a subscribe out of me and like on most videos
@@zmyr88 You're downvoting snow?
I love how you've shown MORE of the process with the hemi, also I love your sense of humor!!!
I just saw this thing in Michigan center today lmao, heard it go by like "jesus why does it sound like that??"
Yep, that was me!
@@robotcantina8957 can't wait to watch the results!
"So essentially were ******, but I have a plan"
This is as American as it gets.
Pretty much ... lol
Jeep, converting my with a R/V generator, v-engine Onan, only
in an American garage.
Brilliant!
@@robotcantina8957 add a turbski.
Great background music choice. Adds to the fun and intrigue of your work. Excited to see future content. 2 big thumbs 🆙
Don't want to say it's jealousy that stirs in me when I watch your content but you've got every tool and component to build whatever engine you desire. What a dream. Outstanding work and it makes for some very entertaining content. Thank you.
I have got hooked to your lawnmower engine swap video series.
This car is coming along nice! I appreciate your efforts on such a unique project. I want to note your choke setup - I thought I was the only one who went down such a road. I put a 196cc electric start clone engine on a gokart project recently, and added a remote choke setup as well. I got the Honda kit meant for a gX160 and it fit like a glove. I then got a cable off Amazon, but I reckon it's the same one at a local auto part shop too. It's amazing how handy that remote choke is!!
I was hooked from the first episode.. Good stuff man.
Came across this series after watching some mechanical fails compilations, the spirit is about the same but quality is astronomically higher!!! Subscribed for sure
I started washing your channel today! I really like the way you show your progress! Can't wait for more updates. I subscribed already! Best regards from Portugal! ;)
Studz racing has custom exhaust kits that are super easy to build, made mine 42” long and added an akrapovic street bike muffler, length helps immensely with scavenging effect as my cam has a ton of duration, the custom exhaust and a long custom intake made from emt conduit, really woke it up!!
By far my favorite episode of "This Old Honda"
That V band clamp is gratuitous overkill for that project........ I love it!
Such a good series!
I get Bad Obsession Motorsport vibes which, definitely isn't a bad thing 😁 thanks for the fantastic content!
You can source choke cables from old couches that recline. Like, living room couches. They have a high quality plastic lined pull push cable
I just found this series today, and I’ve already binged all 15 episodes... Now I’m impatiently waiting for more! Lol, keep up the great work 👍
Love this series! Binge watching is fun! 😅
I'm an Aussie watching from Thailand......can't wait to see the big block tackling the street circuit.....enjoying the brand of humour too :)
I love your projects but, a little bit of advice. Don't weld for long periods of time without gloves. One time I had a few beers and started welding out in the garage without gloves or long sleeves. The next day I had horrible sunburn on my arms from the uv rays. Just some friendly advice from someone who already made that mistake. 🙂
18:01 Best use of Windows Invalid sound effect ever! Hahaha, love it!
I love how thorough yet lazy he is.
Brilliant videos just love your style and sense of humour. Looking forward to the video where you test drive the new engine. Good luck!
I was looking at pedal powered bicycle cars and I ended up finding this series lol. This is dope!!!
I love you so much I don’t skip the commercials.
What an awesome build! It inspiring me to so something similar but without the extra testing.
The commentary is as honest as it gets it’s like I’m talking to my self while working 😂 love this project!
Robot Cantina is totally a "Project Farm" situation.
See y'all at 1M subs!
I fuckin love that genuine honda parts fit on a lawnmower engine without issue!! XD
you sir are one of my top 3 youtubers. ITs a 3 way tie between you(Robot Cantina), This old Tony and Styropyro. Did you guys go to the same Sarcastically Snarky UA-cam Academy ? Your Shtick is perfect !!!!
Had this recommended out of the blue and I love it! Just watched the entire series and cannot wait for the next episode.
Got this series recommended and I'm so happy I did. This content is gold
What a wholesome build. Cannot wait to see what you come up with on the interior and dash
man you're killing us. i want to see it go down the road!
Episode 16 just dropped, check it out
@@robotcantina8957 CONGRATULATIONS JIMBO.. over 100k subscribers! 👍👍 ROBOT CANTINA
continues to provide the entertainment and fun that viewers enjoy!
The 212cc motor video randomly hit my feed and this is awsome! Huge content and editing for a small channel.
Glad you liked it!
"Will it fit into my Honda?" meme has just got a whole different meaning for me.
Love the series man 👍🏼 would love to see you make a video on taking this thing to a car meet
Yes!! I just binge watched the first episodes!! Keep it up!!! 😁
The quality of this video series is absolutely top notch. It’s a crime this channel doesn’t have more views.
Why must you torture me. I thought I was finally going to see it drive. Can't wait for the next video
Great to see an engine swap that isn't an LS or cummins. Keep up the great work!
Backing out of the garage: Error 404: Road not found.
Perfect!
When your car makes a Windows Error noise. You thought it was a Honda but, dude, you got a Dell.
this is a super fun series! really cool to see someone having some fun with small motors in a street legal car! keep up the good work my man!
The UA-cam algorithm at its finest and I can’t say I’m not impressed lol. Subscribed
Also, how does this video have 25 haters already? The fabrication skills alone make this channel great
What a ride. Started from the very first video in this series yesterday, and when I was supposed to be working today, I caught up. This is awesome work and I can't wait to see more.
CONGRATULATIONS JIMBO.. over 100k subscribers! 👍👍 ROBOT CANTINA
continues to provide the entertainment and fun that viewers enjoy!
What an absolute beast👍 another great video thank you
Impeccable timing with this upload. Just got done binging the series.
Custom brackets = echoes of Project Binky, except they left the put-put behind and you added it deliberately :)
awesome series. Thank you.
So happy I discovered you guys during the snowpocalypse.
Same just watched all th videos this afternoon about the Honda that is
A little tip! The section under the car was a little blurry. You can fix this with a higher shutter speed. Usually this causes a slower video but you brought a light down there which is perfect. If you wanna reduce motion blur in the hand held sections, same applies. This should make the paused video look way better :)
If you reach a goal of HIGHWAY 55 MPH using a Honda lawn-mower engine, the car companies should reward you with an Engine Research contract. 😉 Great achievements andterrific videos. I'll never kick my lawn-mower engine again. Thanks.
I love what youre doing on this channel. Please keep us updated. This is a really cool project.
Just found this series. I gotta say, one of the most impressive things is how positive all the comments are. Great community👍
That engine noise from a car is adorable 😄
It's like grampa got drunk and drive home on a tractor 🚜
No wait, gramps is inside a car!
The irony of not using a Honda lawnmower engine in your Honda, fantastic! You’re insanely talented dude. Can’t wait for the next one!
Just stumbled on this channel today. Hilarious project man, and well done. Was shocked you didn't have more subs, as this is very well made. Also realized you're from Michigan too lol. Hello from GR lol.
Look forward to more!
I can't wait to see the stage 1 and stage 2 for this!
now hook it up to the factory fuel tank and it will run forever lol
Awesome series. last time we did something like this, we installed a 200 hp Chevrolet Corvair engine into a 1966 VW bettle........
"So essentially we're f*cked" in the most monotone, unbothered voice ever 🤣🤣🤣
And he forgot the muffler Bering
I binge watched this and even had a few beers to contribute to the manufacturing of this amazing go-car :)
You said the pipe fit the flange, but it fit inside? Did that match the output from the head? A step to a bigger ID is actually good for a header flange for lower rpm power, but if it's choked down that's worse case scenario.
First time I was sad that the show was filmed recently. I am desperate to see this baby on the road! Love your channel. Huge fan. Keep up the good work!
Binge watched this like 2 days ago and the dude’s subscribers have almost tripled... Well deserved!
I love how he welds bare handed but puts the gloves on for easy stuff lol
An excellent series showing what happens when someone has a lot of curiosity and know-how.
Thank you
@@robotcantina8957 CONGRATULATIONS JIMBO.. over 100k subscribers! 👍👍 ROBOT CANTINA
continues to provide the entertainment and fun that viewers enjoy!
I need more after that binge. I’ll be waiting for more.
This got recommended to me 2 days ago and I’m just now watching this interesting series. I’m excited to see how it all ends.
I'm glad I was recommended the first episode in this series, this is awesome.
I missed the "cc" but I didn't feel any bamboozlement.
I think the name of that specific model is predator 420 hemi that's why its in the title.
Will, it's because we thought it was a 420 cubic inch displacement, ie, a big motor.
Wow. Thanks for the flash burn 🤣
Hey, nice video series! Did you thought about these kits to go from carburator to injector? There you got ecu and all the stuff to tune the engine with timing and fuel etc. Then you maybe can turbocharge the engine easier for more performance 👍🏼
An EFI kit is in the works... stay tuned!
Watch the lot in an afternoon, and am HANGING for more! Great videos, loved them. Thank you
I found this channel a few days ago. Your quality far exceeds your subscriber count.
I agree!
His video quality matches his craftsmanship. I see a pattern I think.
Not for long ;)
@@LeighHenderson ??
@@graysonpinkston8498 He went from 3k to 45k since I posted the comment. That's why Leigh said that.
Another nice one! My only complaint is that since I’ve started watching your series that you tube is giving me mostly suggested videos regarding Honda insights! I don’t care about Honda insights! But you’re doing some really neat stuff with a street legal go cart and putting it in a superb video. You’re like a G rated AvE with music! That’s a compliment.
... your next iteration of the car should have a HONDA lawnmower engine... gotta make sure you add VTEC to it for the ULTIMATE EXPERIENCE! 👌... I love it! Keep it up 👊
Can’t wait for the turbo install
This has got to be one of the more interesting series I've seen so far
No!!! I really want to see how this thing does. Can’t wait for the next episode. I’ve bing watched this project from the beginning in the last 24 hours.
Looking forward to seeing what the engine can do
Watching your sub count increase by ~100 every time I started the next episode was almost as fun as binge watching this series!
Omg please dont tell me these series are over. I've spent the last month and alot of money on beer watching these after work. I refused to benge watch because I wanted it to last lol. Your channel is one of the best on youtube. Great entertaining content. I even have my 13 year old son who wants to be an engineer watching it. I know I know a damn engineer he promised me he would make shit easier in the future though LMAO. Hahaha
More videos are in the works right now. Expect the next one in a few days. I plan on do as many engine swaps as I can, hopefully someday I'll actually make some money doing this.
Stay tuned!
@@robotcantina8957 "Almost everything will work again if you unplug it for a few minutes…Including you." -
Thanks for these videos Jimbo. Take care of yourself.
Hell of a find this channel is! Great work.
this is honestly one of the only channels that makes me happy. I love the content! Keep it up man!
Haha man I just realized you’re from Michigan! You need to bring this thing out to Woodward this year!! Haha love the project man!😂