All this hard work and not giving any results. Went through the channel as well, couldn't find anything. Thank you for wasting my time, and thanks UA-cam for removing the number of dislike so we get to see those kind of videos.
Awesome test and nice write up on your website. As it happens I just ordered some very similar to the best overall performers in the test. Planning on going to a sandy site, and screw-in is the only way to go.
Very informative. There are no real results however. So which ones are best? Apart from the obvious that sand pegs work well in sand. Looking at hard ground pegs to be honest, otherwise a normal mallet and average Joe steel peg is all you need in any situation.
using short pegs for hard ground is a better option, so you don't have to drive them in as far( screw and/or standard pegs) so just carry a few shorter ones with you.
nice! I like the idea of screw in pegs, I live in Arizona the ground is hard and there are tons of rocks, so with a hammer in peg you have to put some work in, if you hit a rock you have to pry it back up and start again, sometimes you wear yourself out just putting pegs in and end up with only half that can even go anywhere. screw in would speed the process, may still not always be able to set a peg but you aren't tuckered out from the effort.I think I will save some money and get some long lag bolts , my ten will work well with lag bolts and washers.
No conclusion or results sheet?
All this hard work and not giving any results. Went through the channel as well, couldn't find anything. Thank you for wasting my time, and thanks UA-cam for removing the number of dislike so we get to see those kind of videos.
He can't because he has sponsors.. needs to be mutual??
It looks like a really good test, can you please provide a link to the full video or the results.
Well that was a waste of 6 minutes of my time and hours of his time.
Awesome test and nice write up on your website. As it happens I just ordered some very similar to the best overall performers in the test. Planning on going to a sandy site, and screw-in is the only way to go.
Results?
No results?
Here's the results chart on their website:
rvdaily.com.au/wp-content/uploads/2018/09/RVD031-GUIDE-Screw-in-pegs-04-Results-Table.jpg
A great test but no results. Is this just an advertisement for screw in pegs?
Results are on their website: rvdaily.com.au/screw-pegs-better-traditional-tent-pegs/
@@paulsantos9221 Even that's not great
@@paulsantos9221 most underrated comment... why the heck is this link not to be found in the video description?
Awesom Vid, Thanks!
Very informative. There are no real results however. So which ones are best? Apart from the obvious that sand pegs work well in sand. Looking at hard ground pegs to be honest, otherwise a normal mallet and average Joe steel peg is all you need in any situation.
Very informative? Really? What information did you gain?
@@Kankudai read my reply again. I said there are no real results.
Try the link for the specs below
Well done for interesting test and I found a results table on your web site which was very helpful thanks
Ground Dog pegs wernt provided for you to try?
so are screw in pegs better???????????????????????????????????????????????????
using short pegs for hard ground is a better option, so you don't have to drive them in as far( screw and/or standard pegs) so just carry a few shorter ones with you.
Waste of time. Don't watch this video
nice! I like the idea of screw in pegs, I live in Arizona the ground is hard and there are tons of rocks, so with a hammer in peg you have to put some work in, if you hit a rock you have to pry it back up and start again, sometimes you wear yourself out just putting pegs in and end up with only half that can even go anywhere. screw in would speed the process, may still not always be able to set a peg but you aren't tuckered out from the effort.I think I will save some money and get some long lag bolts , my ten will work well with lag bolts and washers.
Won't be coming back to this channel.
I haven't even watched your video but liked it just how you explained what you are gonna do through this video
But he didn't do it...
Shouldn’t have to go to a web site to get results. Waste of time
Subbed at ‘load cell’