Pro-C Advanced Programming
Вставка
- Опубліковано 2 сер 2024
- This video from Hunter goes in-depth to show you how to use the advanced features of the Pro-C irrigation controller, including everything from the programmable sensor override to Cycle and Soak, plus how to create a lighting program and using the Quick Check feature.
- Навчання та стиль
I appreciate seeing you go thru the Cycle and Soak mode. Thanks.
Thanks for watching!
You explain things so well.
Glad it helped
Hi. I've installed a drought tolerant landscape. There are some station requiring once a month watering and some requiring twice a month watering. The once per week stations were easily programmed. How do I program the pro c controller with a rain sensor to perform the once a month and twice a month watering schedule?
How you make you pump on
what to do when u get a error when u are trying to test the station
How to setup the rainsensor?
Thanks for your reply, but you didn't answer my question. I've programmed three stations on a twice per week schedule using the manual provided with the controller as well as the two stations that are on a once per week schedule. However there appears no way to program the controller to irrigate stations once or twice a month, other than manual operation since the controller programming is limiting water days to a 7 day interval. The cut and paste instructions (with line outs?) doesn't work for once or twice a month irrigation needs and would kill the drought tolerant plants in my landscape. This pro c controller appears to be designed for automated weekly irrigation only.
Hello .. i have a system with 7 stations. I have a sewer treatment plant which provides a tank full of water every 4 hrs. I programmed the system for 5 minute irrigation with 4 hrs delay in between. But one station is skipped so I did a b program with the skipped station and cancelled it from program A. Problem is the instrument won't allow me to do the delay for prog B. Any suggestions?
I purchased a RS 1000 Rain sensor. I can not get it to work with the PRO C. I have 24 v power and the brown and white hooked up to the sensor screws. Am i doing something wrong?
Thanks
Thank you. I thought it had to be running in the program mode. I will confirm that , Thanks
How do you reprogram a station? I currently have a station programmed for Station #3, but I would like to reprogram it to be Station #4. Any assistance would be greatly appreciated!
Hi Sheena, our technical support team can assist you. Please email support@hunterindustries.com
I'm not sure I understand the cycle and soak. You broke up watering into 5 min cycles with 10 min soak, but never specified how many cycles needs to be run, which would be 4. Where do you set this.?
Hi, Hunter Industries.
I have a Pro-C 400i series controller. I have set the cycle and soak times to 3 min and 5 min respectively for station 2. Then, I ran station 2 in manual run mode to test the settings. The water is still running after 5 minutes. How do I test the cycle and soak settings - does manual run override the cycle and soak settings? Is there something that I need to enable on my controller for the controller to activate the cycle and soak feature? I have confirmed that the settings saved by going to Run and then back to the settings (3 second +, then Run Time and + and PRG to set cycle and soak, respectively). Please help!!
Man I watched both of your videos and still can’t seem to set my fathers controller correctly. I set the start time then the run time and when it is supposed to switch stations it does not and continues to run one station for the length of the time selected.
Hi Christopher! Our technical support team can assist you. Please email support@hunterindustries.com
Did I miss the instructions on manual?
Check out this video ua-cam.com/video/4I-vmcON6-8/v-deo.html&lc=UgyU5T4wuth4tcgSFcV4AaABAg.