Craftool Hand Press on Leather
Вставка
- Опубліковано 26 сер 2024
- Professional hand press makes setting snaps, rivets, spots and eyelets quick and easy. Stock no. #3990-00. This rugged industrial press is built to last. Our hand made setting dies (sold separately) are designed to set 1/4" (0,6 cm) Round Spot (#3988-01), 3/8" (1 cm) Round Spot (#3988-02), 7/16" (1.1 cm) Round Spot (#3988-03), 1/2" (1.3 cm) Round Spot (#3988-04), Line 20 Fasteners (#3995-00), Line 24 Fasteners (#3996-00), Multi-Purpose Snaps (#3994-00), Rivets (#3997-00), 3/16" (0.5 cm) Eyelets (#3992-00) and Tubular Rivets (#3998-00).
You can order the Hand Press here: www.tandyleath...
Interested in more video leathercraft instruction? Visit www.leathercraf....
LeathercraftLibrary.com offers videos by subscription for every level of leathercrafter.
Whether a beginner or a master, you're sure to expand your leathercraft knowledge and skills by watching our instructional videos. By subscribing, you'll have access to videos from master leather artists such as George Hurst, Tony Laier, Jim Linnell and Charlie Davenport.
Once you subscribe, you'll be able to view videos in how-to categories that include: Basic Leathercraft, Stamping, Coloring, Figure/Pictorial Carving, Lacing & Stitching, Advance Techniques, Tools and more. Project categories include videos on how to make belts, holsters, knife cases, saddle bags, notebooks, steampunk accessories, home decor items and more.
For Premium Leathercraft Instructional Videos, visit www.leathercraf....
George Hurst is THE BEST!!! I can always count on clear, concise instruction.
Almost bought one of these on sale ($79.99) because it was recommended by Airship Isabella. However, I then found out that the dies were $65.00 at the cheapest. When you are working with many different size rivets, snaps, eyelets and gromets it would take a small fortune. I just have a hard time believing it's worth the money.
coldwind I agree. I encountered the same issues and didn't purchase. Tandy is becoming a greedy company IMO
I bought it at the sale price and love it. The trick is to watch the sales. The dies go on sale Around the end of the year at the holidays, so if you buy a part each time there’s a sale it’s not so bad. And you add to your tool collection.
Michelle L. Zerangue , you are absolutely correct. I bought the gray Craftool Pro handpress at Tandy’s doorbuster Black Friday sale. Since then I’ve been getting dies as they have been on sale, until I have just about all of them now. I used to HATE eyelets and snaps, now it’s a breeze to put them in....and no more banging! It also gives a cleaned, mor3 professional look.
thank you sir 😊
Hi, can it set double cap rivets? Thank you.
seriously...only reason im here
Can it stamp metal? Like, aluminum?
Are the new press dies compatible with this model setter?
Hello, I would like to buy this press but i am wondering about punch tools diameters. Is there any tools which can punch larger holes than 4,5mm ? Can i use tools from 3004-00 Maxi Punch set? Thank you
Normal Hand Press in few bucks. Tandy Leather Hand Press Pro+ in 8 times more price.
This works on webbing too?
Yes it would.
I found this video to be riveting.
lol!!!!
These look like they do a really neat job but I think having to change the dies over twice per snap would get a bit frustrating
This is for production of lots of items. First, do all the hardware on the 50 items of the same type. Then, change out the dies to do the second part on the 50 items.
How does this work if you want to use it for jeans?
these snap machines are rebranded...about a million times...there's like 3 different castings with a ton of names on them
Just purchased one of these & trying it now...both the male & female parts of Tandy Line 24 snaps are spinning even after multiple presses. Also purchased 200 (nickel & brass)...did the snap size change?!?! Tandy is imprinted on the new ones. HELP PLEASE!!! Thx
I make championship belts for a side living and the leather I work with range from 7oz-10oz. I tried to use the LINE 24 attachments and they worked well but the male and female snaps are still 'spinning' since they were not pressed down enough. How would I safely adjust the machine to address this problem?
I need to use this machine and dye for 10.5mm snap buttons, I am trying to place snap buttons on a newsboy cap so the snaps will be hidden behind the visor or brim..my question is what number dye's will I need for this 10.5mm snap button and also, how flexible are the dye's when it comes to using them for different sizes...will a dye for 10.5mm button work for slightly bigger/smaller snap buttons ? thanks
Finally bought one but it pushes the bar into the cap of the female snap, leaving a circle imprint on the finished side. why's it happening?
Roberto Slama,
The black setting dies you place into the hand press have to be changed between setting male and female snaps into a piece of leather. One set is for male, the other 2 are female.
Try changing out the setting dies before you set your female snap.
I did and it turns out, the posts inside of the female snaps' caps are too long. So, I just sanded them down until they mushroomed just enough to grab the opposite end through the leather without causing the cornwing
Just a thought...I have several dies and it is very frustrating when trying to identify which dies go for each use, i.e., rivets, snaps, etc. Is there an. easy way to identify the dies?
go to the store and have them check them by looking at what they have there. Then put them in small ziplock bags with labels. You might also scratch onto the sides what # it is so you can ID it later.
Plano boxes with dividers. Just drop a piece of paper in each section stating what die is what (or tape it to the top of the lid). They're originally used for fishing tackle, but you can put anything you want in these plastic boxes. I have a large one just for all of my sewing presser feet with paper and writing on it attached to the lid so I know what foot is what.
@@BoojiePanda That's a great idea! You could also use a Sharpie or a scratch tool to put a number on each die to identify which slot it goes in.
Does this also work well with fabric?
Carol Rollins Kloetzly Yes it does.
how much does the attachments cost?
Would the line 20 fastener die fit other press machines? Or are they specifically for the craftool press only?? (I am over in australia and am trying to track some dies down for line 20 snaps). Thank you!
+Little Cherry Hill - Metalsmith The line 20 fastener dies are designed for the Craftool press, however they may fit other machines. Reach out to Rob Morton and our team in Minto to learn more! Sydney401@tandyleather.com
Phone: 61287637130
+Little Cherry Hill - Metalsmith - we are professional to produce different die for snap fastener,rivet,eyelet etc..If you are interested,please contact me from comment.
+Little Cherry Hill - Metalsmith hello,any die-set can be fit on machine,just see their die screw part and bottom part.If you are interested,please welcome to contact us at any time,We have in this field for more than ten years.
+Little Cherry Hill - Metalsmith These dies were designed for the Craftool Hand Press, so we can not advise how they may work with other machines.
Can this be used on copper rivets ?
bigdogbigben Hello Ben! Unfortunately we do not make a die for copper rivets.
Tandy Leather Is there a grommet setter attachment?
Orange Lightning We do not carry a grommet attachment, however there is a attachment for eyelets.
Have you ever done anything with this riveter: ua-cam.com/video/OY_cIvGT-bE/v-deo.html ? Is it of any use? Do you know what kind of rivets you would use with it? Thanks for any information you can provide.
i bought a china made setter just like this one for $10 .
Good on you for supporting slave-wages and poor quality work-manship. When the skilled and reasonably-paid work in your country is dried up, and you are forced to work for slave-wages too, because of the way you and your country-people voted with your dollars, and the fact all your skilled jobs will be exported to China, I'm sure that will be great for you too.
(I'm not saying anything about the cost, value or quality of the machine in this video. Just your purchasing decisions.)
Surely the Tandy setter is also made in China; perhaps at the same factory where Manny Fernandez' setter was made.
link?