Wheel acid works the best. 5 minutes flush it out and its like new. Dont leave it in more then 5 minutes is key. The acid reacts with the metal and anything stuck will be released. We do this at work with a 90% sucess rate and its cheap.
Since the heater core is made of an aluminum alloy, I would be VERY hesitant using any lye-based product like Drano. The Drano website states that it will not harm metal, but I'd still be reluctant to use on an aluminum heater core; I just had to un-clog my heater core recently and I did it the same way shown here but I used CLR which did make a big difference. First, I flushed the heater core with pressurized garden hose which did blow out allot of crap, then I added a mix of CLR & H2O, let it soak for 10 minutes, then re-flushed with the pressurized garden hose and allot more crap came out due to the CLR mixture.
Hi there I have done what you showed video but here in the UK 🇬🇧 I use mr muscle same stuff what you put in your heater matrix as we call it here still no heat but my car is a fiat grande punto 1.2 08 if you can help ? Good video
Great video..But, i just used a air hose with a trigger and with a rubber adapter.Blew it in reverse worked GREAT..and NO chemicals...I hate chemicals..lol
Drain car coolant. Fill radiator with white vinegar let car run 15 to 20 min with heater blowing and drain vinegar and refill with coolant. You should be good. Thank me later ☺️
titles slightly misleading. I dont see that this would be any faster than the traditional CRC or Vinegar or other methods, Still gotta access the inlet /outlet lines & remove hoses & prep & all the traditional stuff regardless. only difference is using drano
I think it s my problem I’m gonna do that, thanks great job
Helpful stuff bro way to go...👏👏👏
Thanks Murray
Wheel acid works the best. 5 minutes flush it out and its like new. Dont leave it in more then 5 minutes is key. The acid reacts with the metal and anything stuck will be released. We do this at work with a 90% sucess rate and its cheap.
So 15 min is to long ...thanks ...so 5 min is the charm
Confirmation I was gonna try that method, thanks for the info
What is wheel acid and where to buy it?
@@MyDearestTinaMarie white lighting ,you get it from the part store
I used chrome wheel cleaner too ... 15 minutes worked great
Great troubleshooting techniques!!
Great information and very practical!!!
Thank you for sharing!
Your welcome boss thanks for your feedback
Great video, I got to try it.
Ok thanks
Well done lucky I found you I was looking at changing out the heater core I'll try this first
You're welcome boss , thanks for your feedback
Since the heater core is made of an aluminum alloy, I would be VERY hesitant using any lye-based product like Drano. The Drano website states that it will not harm metal, but I'd still be reluctant to use on an aluminum heater core;
I just had to un-clog my heater core recently and I did it the same way shown here but I used CLR which did make a big difference.
First, I flushed the heater core with pressurized garden hose which did blow out allot of crap, then I added a mix of CLR & H2O, let it soak for 10 minutes, then re-flushed with the pressurized garden hose and allot more crap came out due to the CLR mixture.
Hi there I have done what you showed video but here in the UK 🇬🇧 I use mr muscle same stuff what you put in your heater matrix as we call it here still no heat but my car is a fiat grande punto 1.2 08 if you can help ? Good video
Wow make sure your door blender are working
Great video..But, i just used a air hose with a trigger and with a rubber adapter.Blew it in reverse worked GREAT..and NO chemicals...I hate chemicals..lol
Nice
I liked the cone and pipe
Lol thanks
where are you located, may i make an appointment!?
Sterling va Google Nestor auto repair
What size are the hoses pls
Drain car coolant. Fill radiator with white vinegar let car run 15 to 20 min with heater blowing and drain vinegar and refill with coolant. You should be good. Thank me later ☺️
👍
cant you just use hot water?
At the end.of video. Junk in bucket looks like antifreeze silica. I have never liked silica antifreeze and or extended life antifreeze.
Yup
titles slightly misleading. I dont see that this would be any faster than the traditional CRC or Vinegar or other methods, Still gotta access the inlet /outlet lines & remove hoses & prep & all the traditional stuff regardless. only difference is using drano
Yes sir
please can you get back to me Thank you
Yes hi
Hi there I have done what you shown ad I use mr muscle here in the UK 🇬🇧 like the grano but it's still running out slowly bit of help please
Did you put hot water ?
left it for half hour used pure boiling hot water thru the funnel thru both pipes on my fiat grande punto