Yes, but I've read on some forums it's actually possible to get that option back on both 147 and GT Alfa's, but it takes some skills to get the right program into the computer. Won't be trying that myself :D
Thanks for posting this. My Alfa Spider's windows would not close fully, after recharging a flat battery. I followed these instructions, and now windows close properly. You have to wonder why Alfa don't put these instructions in the hand book!
Is not a big problem to make close windows via key avilable in lift models after 2006. You need to connect pins 2 with 3 and 7 with 8 in drivers door module by 1 Kohm resisstors, then connect PC with MES and there in "Body" just turn on this option and do proxy alignment procedure. That's all.
@@arcgarage hello! I have the kilometers indication blinking in my GT 3.2 V6; it started after winter, the battery was empty so i removed it to reload it (as I did other times in the past) and then put it back and reconnected it. When I started the engine, I noticed that the kilometers are blinking. It never happened before. And I haven't changed anything. Do you know how to fix this issue? Many thanks and regards.
@@zapoi67 Yes, connect it to diagnostic tool and see which node on canbus network is missing. First do a proxy alignment, if that solves the issue you're good. If it keeps on blinking you need to address the component that's missing on canbus network. regards
@@arcgarageThank you very much! Should I do it at an Alfa Romeo workshop, or any mechanics with a diagnostic tool can do it? And : the reset procedure shown in the video, could it solve the issue or is it useless? Thanks again!
Hi，how do I stop my kms indicator on the dash from flashing on and off? Bought the GT last year, they changed window regulator and this is when it started. Thank you.
Try the ECU reset, here's the video ua-cam.com/video/4ExI-Xu2eaI/v-deo.html , If that doesn't work take your car to a shop with good diagnostic tool so they can scan all of the modules...
Alan Beggs Can’t say I’ve heard of a proxy realignment before. Its news to me. It’s my lack of knowledge I guess. Does it require a diagnosis tool through the OBD port? Otherwise I’ll try the ECU reset as suggested by ARC.
@@teamfear4496 yes its done with a diagnostic tool,I have successfully reset it once with the ecu reset as described by ARC garage but i replaced the door cards recently which involves disconnecting the window control panel(This is what causes the flashing) and the ecu reset didnt work this time. If you search the alfaowner forums you will find plenty info on this.It can be done using multicuscan software and the correct adapters I believe but i havent had the time to try it yet.Otherwise your mechanic should be able to reset it with his diagnostic tool.Mine has been flashing for months now🙄
hi ARC, at the immobilizer tip, how do you enter numbers? So if you have to enter number 5 for example, which button do you push (or you push the gas pedal 5x) ? Thanks for answer, and videos, SUBSCRIBED :)
@@arcgarage I have ELM and VAG kkl, ELM for dashboard, body and climate control, VAG kkl for engine,abs,airbag,headlights and services, i'm using this with multiecuscan software but I didn't found option to turn on needle sweep... It would be great if you can find that option with your ELM cable...
I also have ELM, KKL, and all of the adapters and I am using it with full version of MES, but I have issues with ELM cable, that's why I bought the modified one. I'll get it soon, and check it out...
You can leave the car, as I did after maybe 5 minutes, although the safest way to do it is to stay in the car, since things like modules which control the windows, doors, etc., also get reprogrammed... Now you can't do any damage, but you might have to repeat the process again...
@@arcgarage I know about that reset method. But, here is another problem. Window don't respond when press button , also when open/close the door. Nothing happens
Try with ECU reset procedure, I've actually fixed an issue once when passenger window didn't respond. However, if your windows don't respond to window buttons/switches, you probably have different issue. If that's the case I would start with fuses and work my way toward the switches and window motor...
Hello! Nice video! Please tell me,if i change my flowmeter and do the reset of ECU,will it remove my check engine fail light(it is on beacuse flowmeter doesn't work)?
Hi ARC garage i have question for you, how to close windows with key on alfa 147 2006 jtdm ?I opened the windows by holding the unlock button. And can you record a video as tips and hacks for alfa romeo 147??
in this way on my alpha 147 petrol 1.6 -2006 year the check is not erased, and I do not know what the problem is and why the catalyst is hollow (it is cut)
@@arcgarage Oh ok.... I was expected so much than someone find a way to got this on the GT 😭 Really good videos btw. Now, I can restore my sticky windows button and my door handle with ur tuto. Thanks 😁
On the matter of the windows, I would like to ask you, please: the one mine on the driver's side (left side, as your gt) window, when activated, automatically goes up to the top of the whole and then descends alone to a quarter of the total. I can only close it, uploading it with small touches, until it gets up. Nor now, it opens that little when you open the car (and closes when you close the door) or lower the window when you press the opening, as before. You have an idea of what I can do to get it back to normal (the trick you mentioned in the video, it didn't work for me). As always, thank you so much for your videos and for being there.
@@arcgarage Oh, hell, don't tell me that!!! ... I have found a scrap seller, he has told me so cheap that I distrust (😒40 euros for the module and the trunk lock), but if I finally find it, I have to reprogram all the modules, right? Thank you very much😚
Najjači naglasak na UA-camu :D
Window close and open feature with the key is only available on 2004, and 2005 cars. In 2006 they removed the closing feature due to child safety.
wow realy ? thx for information
Yes, but I've read on some forums it's actually possible to get that option back on both 147 and GT Alfa's, but it takes some skills to get the right program into the computer. Won't be trying that myself :D
You just gave me a hope. Bought the car and need to replace the window mechanism. Can't wait to try this trick.
dang, i was worndering why doesnt it work on my 147
Thanks for posting this. My Alfa Spider's windows would not close fully, after recharging a flat battery. I followed these instructions, and now windows close properly. You have to wonder why Alfa don't put these instructions in the hand book!
No problem, glad it helped. You're right, it should be listed in owner's manual...
Thanks again. Always useful to get hints and tips on Alfa's!
No problem...
Good tips that are useful for many people. Looks like you are running on LPG too. Good to see.
Thanks, yes I am...
ARC Garage yes I run all my Alfa’s on LPG
@@CumminsVoortman Me too...
@@arcgarage is it jts engine? What type of lpg did you use?
Is not a big problem to make close windows via key avilable in lift models after 2006. You need to connect pins 2 with 3 and 7 with 8 in drivers door module by 1 Kohm resisstors, then connect PC with MES and there in "Body" just turn on this option and do proxy alignment procedure. That's all.
Didn't try it, but great to know, thanks for the info
Nice video.
Dint't know about the first dashboard illumination off - useless but nice to know :D
Thanks, It is, but it's still one of them quirks which make Alfa Romeo special...
Useless if you have good eyesight - Useful to those to have their eyes very sensitive to bright lights
@@ArtanisG. Yes. I imagine this being useful on very dark roads during night drives
It doesn’t work for my 1.8 GT :(
Brilliant video and tips … thank you very much … really useful
You're very welcome, thanks for watching...
@@arcgarage hello! I have the kilometers indication blinking in my GT 3.2 V6; it started after winter, the battery was empty so i removed it to reload it (as I did other times in the past) and then put it back and reconnected it. When I started the engine, I noticed that the kilometers are blinking. It never happened before. And I haven't changed anything.
Do you know how to fix this issue?
Many thanks and regards.
@@zapoi67 Yes, connect it to diagnostic tool and see which node on canbus network is missing. First do a proxy alignment, if that solves the issue you're good. If it keeps on blinking you need to address the component that's missing on canbus network. regards
@@arcgarageThank you very much! Should I do it at an Alfa Romeo workshop, or any mechanics with a diagnostic tool can do it?
And : the reset procedure shown in the video, could it solve the issue or is it useless?
Thanks again!
do one for alfa 147
Will do
What's the extra black thing next to the fuel filler?
It is the filler for LPG...
Hello ,Nice video!! What kind of front spoiler you have ? Its very simple and cool.
Thanks, it is universal front lip, here's the video on it ua-cam.com/video/MA1MSbTZrTM/v-deo.html
@@arcgarage Thank you!
I have Problem with the parking light on the right side and the light does not work on the left side....did anybody know how i can fix it?
Great video. I'm looking to buy Alfa GT with 2.0jts, how is the engine treating you?
hey nice video,
i have a problem with the bordcomputer , the range and the consumption are not displayed correctly, do u have any fixes for that ?
Thanks, I would have to look into it...
¿How do you change the gear knob? ¿twisting or pulling?, mine is quite used and I want a new one.
Pull it upward... It is also a good idea to heat it up with a heatgun to soften it up...
@@arcgarage Thank you.
Useful. Thanks a lot
Glad it was helpful
the ability to open the boot from the inside is actually a legal requirement in some markets.
I think in most
Hi，how do I stop my kms indicator on the dash from flashing on and off? Bought the GT last year, they changed window regulator and this is when it started. Thank you.
Try the ECU reset, here's the video ua-cam.com/video/4ExI-Xu2eaI/v-deo.html , If that doesn't work take your car to a shop with good diagnostic tool so they can scan all of the modules...
You need a proxy realignment.
Alan Beggs Can’t say I’ve heard of a proxy realignment before. Its news to me. It’s my lack of knowledge I guess. Does it require a diagnosis tool through the OBD port? Otherwise I’ll try the ECU reset as suggested by ARC.
@@teamfear4496 yes its done with a diagnostic tool,I have successfully reset it once with the ecu reset as described by ARC garage but i replaced the door cards recently which involves disconnecting the window control panel(This is what causes the flashing) and the ecu reset didnt work this time.
If you search the alfaowner forums you will find plenty info on this.It can be done using multicuscan software and the correct adapters I believe but i havent had the time to try it yet.Otherwise your mechanic should be able to reset it with his diagnostic tool.Mine has been flashing for months now🙄
my door windows , are going up and down not fluently! every time i need to push the button shortly and shortly ! can you suggest me some fix?
Try window reprogramming, you got video on the channel...
hi ARC, at the immobilizer tip, how do you enter numbers? So if you have to enter number 5 for example, which button do you push (or you push the gas pedal 5x) ? Thanks for answer, and videos, SUBSCRIBED :)
Hi, thanks for support. Check out the channel, you got dedicated video just for that, you have to let it blink 5 times...
Is possible to turn on needle sweep on this car?
I don't think so, but I am waiting on my modified ELM cable, so I might give it a try...
@@arcgarage I have ELM and VAG kkl, ELM for dashboard, body and climate control, VAG kkl for engine,abs,airbag,headlights and services, i'm using this with multiecuscan software but I didn't found option to turn on needle sweep...
It would be great if you can find that option with your ELM cable...
I also have ELM, KKL, and all of the adapters and I am using it with full version of MES, but I have issues with ELM cable, that's why I bought the modified one. I'll get it soon, and check it out...
During idle 15 min, can I leave the car or I shouldn't open the door?
You can leave the car, as I did after maybe 5 minutes, although the safest way to do it is to stay in the car, since things like modules which control the windows, doors, etc., also get reprogrammed... Now you can't do any damage, but you might have to repeat the process again...
@@arcgarage I have problem with windows. So I will try this method, before test windows module.
You don't have to do the ECU reset procedure, you can just reset the windows, here's the video ua-cam.com/video/Ph73_9_2KvU/v-deo.html
@@arcgarage I know about that reset method. But, here is another problem. Window don't respond when press button , also when open/close the door. Nothing happens
Try with ECU reset procedure, I've actually fixed an issue once when passenger window didn't respond. However, if your windows don't respond to window buttons/switches, you probably have different issue. If that's the case I would start with fuses and work my way toward the switches and window motor...
Do you know where the emergency cord is to open the fuel filler cap is please?
Open the trunk and on the right side, will do a short video for that...
@@arcgarage thanks..Is it under the carpet? that’ll be fantastic 🙏🏻
@@aggie3344 No, you got little cutout on the side...
@@arcgarage ok thank you 🙏🏻
Hello! Nice video! Please tell me,if i change my flowmeter and do the reset of ECU,will it remove my check engine fail light(it is on beacuse flowmeter doesn't work)?
Yes, it will...
Thank you
@@GG-dp4xf No problem...
Hi ARC garage i have question for you, how to close windows with key on alfa 147 2006 jtdm ?I opened the windows by holding the unlock button. And can you record a video as tips and hacks for alfa romeo 147??
Will do, but keep in mind that option was discontinued on later models due to safety concerns...
@@arcgarage Thank you very much , you are the best just keep record videos man 👍💪
@@SenadBra Thanks, and thank you for support...
@@SenadBra IT can be activated with Multiecuscan! I have a 2007 fl GT and I could do it. If you need help email me: folding.benjamin@gmail.com
in this way on my alpha 147 petrol 1.6 -2006 year the check is not erased, and I do not know what the problem is and why the catalyst is hollow (it is cut)
If there is no cat, the 02 code will pop up
Hi i lost my Key card. Did you know how Can i get one? Maybe in your country its free to get one ?
Hi you can get one at dealership
Is your car boot door opened automatically? How did you do that?
No, I opened it by hand...
@@arcgarage Oh ok.... I was expected so much than someone find a way to got this on the GT 😭 Really good videos btw. Now, I can restore my sticky windows button and my door handle with ur tuto. Thanks 😁
No problem, glad I can help...
On the matter of the windows, I would like to ask you, please: the one mine on the driver's side (left side, as your gt) window, when activated, automatically goes up to the top of the whole and then descends alone to a quarter of the total. I can only close it, uploading it with small touches, until it gets up. Nor now, it opens that little when you open the car (and closes when you close the door) or lower the window when you press the opening, as before. You have an idea of what I can do to get it back to normal (the trick you mentioned in the video, it didn't work for me). As always, thank you so much for your videos and for being there.
If you can't get rid of the problem by reprogramming the windows, the module might be at fault...
@@arcgarage Oh, hell, don't tell me that!!! ... I have found a scrap seller, he has told me so cheap that I distrust (😒40 euros for the module and the trunk lock), but if I finally find it, I have to reprogram all the modules, right? Thank you very much😚
Dear, know you if serves piece from alfa 147 or other model?. Thx.
@@manuelsolsona5795 Only from GT
@@arcgarage I thinked so😭. Places to buy only the inside circuit board?🤔
The illumination trick doesn’t work for my 1.8 GT
Does it have a board computer?
@@arcgarage what is a board computer? Sorry I don’t know :(
Hello, where Can i find your gear knob ? Thanks
I wouldn't know, I got a car with it...
@@arcgarage ok thanks anyway
This gear knob is from gt blackline and q2 models...
@@Zorz-PapaDubi1290 i think it is the stock one for all the JTS models
@@matyasvarga12 you're right
Hey man, does the Alfa GT have cigarette lighter?
yes
@@arcgarage can you tell me the location
@@kokotyson Open the ashtray and it is right next to it
@@arcgarage thanks mate!
@@kokotyson No problem
A to moja metamorfoza Alfy Romeo GT
Pozdrav,
Moze li neki kontakt br ili email?
Pozdrav, ima email u about sekciji