KONE NanoSpace™elevator replacement process video
Вставка
- Опубліковано 1 жов 2024
- KONE NanoSpace™ elevator replacement process video demonstrating the main phases during the elevator replacement and installation process when an old elevator is replaced with new KONE NanoSpace elevator.
At KONE, our mission is to improve the flow of urban life. We provide elevators, escalators and automatic building doors, as well as solutions for maintenance and modernization to add value to buildings throughout their life cycle.
www.kone.com
/ konecorporation
/ kone
thanks youtube algorithm.
Lol the amount of pits I've seen in water..... 🤔 Looks cool tho
Exactly what I was thinking.
That’s quite literally why this elevator doesn’t exist in the US and elevator companies stopped making bottom-drive systems. lmao
Depending on how many openings there is in hoist way of the new elevator, determine how long it takes to to build.. Not no 2 weeks from beginning to end.. No way..
first time i have seen a nanospace lift installed. it is a lot easier and less graft than we had to do in the 70s and 80s with high speed passenger lifts.
Great idea until the pit gets flooded....LOL and I guarantee it will
This does seem like an interesting design of lift. :)
Then the pit gets water in it and wreck the machine.
Was just about to say the same, Otis did this years ago and it was horrible.
That's why you need a FitPit Elevator System.
They say that the machine can survive subwater conditions.
There's pumps for shaft pits that pump out any accumulated water on the shaft floor preventing just that.
That’s why bottom-drive systems aren’t made anymore in the US as far as I know.
Já fui montador da kone .é já montei ese tipo de elevador. Excelente equipamento.
É é parece que o Kone está de volta ao Brasil
2 weeks of over time and building being shut down , good luck dragging the new rails in the shaft, only 16 foot long oh wait you got 2 counter weight frames ! which require double rails for them too ! wow what a better way to spend tons of money for 5 more square feet
0:00 Introduction
0:24 Site survey
0:39 Old elevator disassembly
1:55 Installation
2:30 Shaft components
2:57 Elevator controller
3:53 Hosting unit
4:11 Balancing weights
KONE Nanospace
More comfort in less time
2 weeks? lol. Maybe in the test tower. The other trades have to get fire life safety, power, phone lines, etc. brought in. Plus an entire demo is a weekish. Imagine scheduling inspection before you even man the job.
When I saw the controller on the 1st floor right next to the elevator in a panel I then knew it was a MRL (Machine Room Less) system before the bottom mounted drive machine was even shown. They take much less power then the larger geared and gearless drive machines in a rooftop/basement elevator machine room.
Wish there was an option to not have the motor in a pit. Live in Florida and our community was built in the early 70's and the elevators need to be replaced. But, one of the issues is they need to get everything out of the pit due to tropical season at least once or twice a year flooding the pit area. As a result they have to shut down the elevators during any high rain periods to prevent the motors from being shorted.
or have a second motor above the hoistway as a part time replacement.
They do have alternative options to counter your problem.
The motor usually isn't stored in the pit
wizbang68 what about a sump pump and pit?
kone is number 1 in callback rate. next to otis and schindler. based on our building equipped with different elwvator brands😅😅😅😅
AS THE MACHINE IS IN THE PIT IT WILL CREATE PROBLEM IN RAINY SEASONS IN PLACES WHERE WATER LOGGING IS AN ISSUE
Hmm this video makes it look so easy, those who work in the lift industry will know that the installation is far more complicated.....
Aegys TierOne if you know what you’re doing, nothing is complicated
This is just to give you an overview.....
the elevator is larger than the doors and smells like 40 year old slim jims
Ohhhh smart.
If I interpret this correctly the counterweights are a bit overbalanced to coax a bit more payload from the motor since this seems to be push/pull.
Elegant system.
Can the air ventilation of the air flow be control . Example the speed and the qaulity of the AIR circulation from the ceiling at the time length to be control it or just by the setting selected time assess and access temperory or permanent by the controller technician or just by the setting computer machine generate auto only at a selected timing daily or weekly or monthly of the speed air flow circulation inside the lift of any ventilation guidelines to be learn and known and study.
Hi, thanks for reaching out. Please contact your local KONE team and they’ll be happy to help you. You can find contact details for where you are from the local website: kone.com/en/local-website-selector.aspx
Thank you!
Awesome technology nano space
First time I saw this unic technology we hv seen monospace then mini space nano space experience of comfort
Боюсь, что мусор, пыль и вода уничтожит это электродвигатель.
motor in the pit sounds like a recipe for disaster
2 weeks? 🤔😲
hungrynapps no shit...where I work 1 elevator takes 6 months...
KONE refuses to pay anything to the inventor of this idea but puts a trademark and is marketing this revolutionary new hoisting concept.
Türkiye'den ekip alımı yok mu
I know of cable lift elevators and hydraulic elevator for just a few floors. But I have wondered why elevators did not use a jack screw mechanism. I suppose the flex in the drive screw would be a problem with taller installations. Screw drive would be very smooth and quiet with little car fall risk except for major structural failure.
Screw lifts exist but only in very small industrial applications and then only with a very low head.
They are *very* expensive to build and to maintain.
Also slow as F.
They are only one step up from gear lifts, yes with a rack and pinion.
Next generation elevator will be electric magnetic rail
Honestly the rails and brackets they were demoing looked brand new still.
Why isn't this available in the Americas? Oh I just forgot we are fat
It's actually because the motors in the pit won't work there due to heavy flooding & storm surges
Koné is very Nice
i dont trust belts. seems like a system designed to have high maintenance costs.
The motor is placed at the bottom of the pit, where the entire bottom gets flooded, of course it's a system designed to have very high maintenance costs.
Job security
I hope that they already do know how often there is water and high humidity in bottom of the shaft?
A marvellous piece of engineering, but it's concerning that both the motor and its control unit are located at the bottom of the lift pit. All it takes is one leak/flood and your motor is fried.
I thought Kone was pronounced as cone not connie
Great ideas and great solutions. Congratulations.
itll take two weeks for the other subs to finish power, fire, phone, masonry and plumbing once the install is complete...then u have to get on the inspectors schedule
"Echo reel"? "Eco" should be pronounced the right way. Now "echo", echoes throughout the whole video...
piece of garbage..........wait till a flood or very heavy rain..........pit flooded, machine wrecked.........
Price for 400 Kg
Ну и говно это коне, как оно достало, на каждом шагу это говно в Казани покупают 😠😠😠
good job
That lift is now 7 years old 😂😂
Now 10 years old
2 weeks from start to finish 😂😂😂 2 weeks maybe for the inspection
well well amazing 😉 I love ihope be for ever
Phoebe Johnson 😎😎😎😙👍👍👍👍👍👍👍👍👍👌👌👌👌👌
1:07-1:08
we have been expected more supportive treating from the company????
What types of buildings are these most common in?
We don't have nanospace here.
Probably the same car as the
Is KONE nanospace good for a house??
Yes
Likely not. These are intended for replacement of older lifts, not new installs.
Hahahaha you are old fashion
We don't have NanoSpace in Russia.
www.apson.co.in
What would be the ball-park figure in INR for a six-story building?
me bulid kone im roblox
Otis watching this : 💀
Who made the ecodisc lift voice
Why is this on my recommended?
But more importantly......why did I watch it?
✅
4:35 Why is the stator of the motor rotating...
Too complicated... Not easy to instal! Not easy to realease traped passengers! It is beter with machine room...
"Beter"
"Instal"
"Traped"
"Realease"
MRL lifts are more convenient.
They have brake release in the logic cabinet.
Ага все так красиво, что придраться не возможно) только в реале все не так как на видео особенно в Израиле! Демонтаж старого лифта идёт абы как! Демонтаж порталов полный ппц, открытые участки шахты не закрываются как следует тип на всю высоту проёма! А всего лишь ставят поддон и все! Так что даже ребенок может туда упасть.
А монтаж нового лифта, занимаются хаперы/ про рабы и т.д. выполняю свою работу на отеб.. лиж бы бабки получить! А сколько они косяков оставляют после себя! Потом приходится притягивать болты по всей шахте, и то смотря как еще выставят рельсы) ато еще ловите ли по всей шахте шарманку играть будет₪
why did i come here you may ask well
Kone is my name
Nanospace is a fail they stopt making this lift
Their closed
TWO WEEKS!? That's "fast and trouble free"!? From the initial pitch I thought you'd say something like two days. How long does it take when it's "slow and troublesome"?
What did you expect?
Months.
No comments
Kone elevators are so smart
👌👌👌💪
Nice elevator
天水圍站唇色𡘾!
Well done
Helo
Who needs a machine room when you have ECODISC MRL’s?? And 100000x more efficiency with KONE?
kone used some spongebob music
Kone me complete kaise kar sakte contractor par
Since when is the motor room in the pit??
When there is no room anywhere else.
I work in rancon elev
What is in side momin size.
2 WEEKS?!?! Haha
TRG Lifts yea it is not possible without cutting corners and sacrificing some safety smh.
I work in a Shanghai Mitsubishi company, Bangladesh
ım not englishe
👍
Very good video
#tanweerahmed
Get full comprehensive or else 💱💱💱💱💱💱💱💱💱💱💱💱💱💱💱........... Suppose any leakage in the pit
Meglio un impianto tradizionale troppe pulegge.
Өтте сапалы екен
Beno love you
I ❤ lifts
Lol i got stuck in kone elevator Finland Tampere lol
👍-up
Chic.
Amazing!
Kone makes some nice lifts
جيد
what kind of software is it for design and simulate elevatror?
Well done
I prefer #Johnson_lift is more better
No, Johnson lift does not actually make lifts, they assemble them, best to use a elevator manufacturer like Schindler or Kone.
Sir apply process Bata saktey Ho join karna hai company
Cool KONE
IT NOT KONNE ITS KONE
I think their PR and advertising departments have it right.
I’m nanna
someone please tell me the software to design this stuff and simulation