Rabbit we ith an attitude, looks awesome! I'm a bodyman/fabricator and also work with fiberglass and resins. My only advice to you is keep the area ventilated and wear a mask. Keep up the good work!!
Im gonna be honest... RIGHT up to the final result, I'm like WTF is he doing? Your methods are much different than I'm used to seeing, but I'll be damned if I can deny the results. Came out a WHOLE lot better than I was expecting.
Tirrell Keylan Burrell yes the do rub a little but these are not the wheels I’m gonna keep when I get new wheels I will cut the wheel arch to fit thanks for watching
goupan I’m such a sucker for bbs mesh wheels but it’s also done on every mk1 ever think I might go a different route well if I found a smash deal on bbs wheels I might rock em for a sec lol 😂
Biggest tip I could give you so you could get alot more imperfections out next time around on your body work is to mist the puddy with a very thin splatter of any aerosol paint can so when you were doing the puddy bodywork it shows you all the low and high spots as you are sanding and once you see a even sanding pattern as you sand it it means its literally ready to go takes alot of the guessing out of hand sanding for beginners (when I mean very light spary splatter I mean very light just a light mist effect and you should be good)
Wow. I have to say I’m surprised how good it looks! Great job!! Are you going to make cuts for the rear doors or nah? Either way this is seriously cool. Thank you.
shoulda made a mold on the first stage, coz all those defects would be easily fixed on the mold itself. and if you wreck it you can just make another one quicker and easier.
a tip from a nobody here....sand in circular motions, with a flexible, soft, pad over yoursand paper. it sands curvature more evenly than sanding with strokes. let me know if this works for anyone.
Be a nice guy! Keep doing this, don't let anything convince you! Class project! Greetings from Germany 👌
djdjdjj djdjdjdj thank you I appreciate the kind words 🤘🏻🤘🏻
🤘🤘
Rabbit we ith an attitude, looks awesome! I'm a bodyman/fabricator and also work with fiberglass and resins. My only advice to you is keep the area ventilated and wear a mask. Keep up the good work!!
Jay Alvarado thanks for the tip 🤘🏻
I wasnt sure how this was going to turn out when i started watching the first video, but now you've got a subscriber! Excellent work man, keep it up!!
Ronan Gallagher well I appreciate your honesty and you sticking around thank you
Very unique look man. Can’t wait to see it all setup and done.
Robert Febur thank you 🙏🏻
Im gonna be honest... RIGHT up to the final result, I'm like WTF is he doing? Your methods are much different than I'm used to seeing, but I'll be damned if I can deny the results. Came out a WHOLE lot better than I was expecting.
🤣🤣 yea it was a little unorthodox thanks for watching all the way through and leaving your opinion I appreciate it
Nice project bro. Im your 800th subscriber 🎂 maybe a longer edit of the end result? Would be cool
Jesse Ambachtsheer thank you 🙏🏻 ok I will
Jesse Ambachtsheer also check out my IG there might be a little more detail there
Nice! Ill check it out right away!
Good job man turned out super good
joe eoj thanks bro a lot of work but definitely worth it
Awesome job. Just goes to show what you can do with time and patience. Keep it up.
Matthew Lombard thank you i appreciate it
Would you ever make molds of the fenders and do made to order fenders?
Stunning! We need a carbon wrap cage
Duane Bowers thank you that would be sick
For what its worth!.. it looks really good! great job!
Aasa Stephenson i really appreciate you taking time to watch 🙏🏻 thank you
Good job bro, came out awesome!
David Barela thank you 🙏🏻
Have you turned you front wheels to see of its rubbing?
Tirrell Keylan Burrell yes the do rub a little but these are not the wheels I’m gonna keep when I get new wheels I will cut the wheel arch to fit thanks for watching
dooood great craftsmanship and really nicely edited vids! SUBBED!!
ToWelie Mc tOweLL fAceE thanks man means a lot cuz I’m pretty new to both of those things 🤣🤣
@@eurokevin nah seriously youve done a clean job i couldn't do better haha and also if you keep on posting once a week or even more you will explode!!
What front bumper is that???
About how long was the project build
5 months but I also have a full time job and a kid so I don’t get to work on it constantly
nice dude! bbs mesh would look sick on it
goupan I’m such a sucker for bbs mesh wheels but it’s also done on every mk1 ever think I might go a different route well if I found a smash deal on bbs wheels I might rock em for a sec lol 😂
I’m not in to all this modding but I find it interesting. You have done a good job, looks cool.
Michael Rich hey thanks for watching
Biggest tip I could give you so you could get alot more imperfections out next time around on your body work is to mist the puddy with a very thin splatter of any aerosol paint can so when you were doing the puddy bodywork it shows you all the low and high spots as you are sanding and once you see a even sanding pattern as you sand it it means its literally ready to go takes alot of the guessing out of hand sanding for beginners (when I mean very light spary splatter I mean very light just a light mist effect and you should be good)
chevecrazy454ss thanks for the advice I appreciate it
Very nice.... keep up the good work
Grant 7 Paints & Coatings thank you 🙏🏻
Hey can you link all the tools and products you have used or make a list and post it on your ig?
Guillermo Madrigal that’s a great idea I will try add it in the description but dm me on IG and I can help you for now thanks for watching
This project is so cool
Mario 'o' thanks I appreciate it
is that a Natal Durban registration on the back?
no clue lol
@@eurokevin In south africa, there is a town called Durban, and their registration starts with ND and some numbers (Natal Durban)
Great job my friend, seems quite a lot of work But I love the end result
Antonio Amendola yea it was tons of work thank you 🙏🏻🙏🏻
Wow. I have to say I’m surprised how good it looks! Great job!!
Are you going to make cuts for the rear doors or nah? Either way this is seriously cool. Thank you.
Chris thank you I appreciate it I am actually going to turn it into a 2 door 🤣 thank you so much for watching and commenting
Wicked job man!
Andy G thank you and thanks for watching 🙏🏻🙏🏻
Wow brother! That came out really nice!
Factory Fiction thank you 🙏🏻 I appreciate it
@@eurokevin where are you located? Check out my channel and maybe we could collab on a project sometime!
@@FactoryFiction I live near Portland Oregon what about you?
Bellingham WA so like 4ish hours away
Factory Fiction not too bad my brother in law actually lives out there
It’s looking so rad! I want you to give my new car a fresh color, I’ll come by soon and have you appraise it. 🙂
thank you yea I can definitely do that for you hmu
Love mk1 had mk3 vr6 but now got mk4 25anniversary
Sons Rc hell yea vw life I love a mk3 vr6 classic ride thanks for watching 🙇🏻♂️
Sweet bro
Love it, looks so good an nasty raw, I think I got an eye infection.
smithy george 🤣🤣 I’m dead 😵
Love the rust look. Shame the wide body wasn't steel to keep the rust look going. Great job mate
anthony bautovic one day I might paint them and and make them look rusty
anthony bautovic thanks 🙏🏻
Looks good!not a fan of patina,the car would be crazy shiny black w those mat panels
untouchable, light after darkness thanks I appreciate your opinion the car was full of bondo and rust plus I love a sweaty vw 🤣
Great job I give you a lot of credit 👍 doing that in a garage yes sir.
Victor's Garage thanks I appreciate it
shoulda made a mold on the first stage, coz all those defects would be easily fixed on the mold itself. and if you wreck it you can just make another one quicker and easier.
erickrayos for sure still might make one one day
Nice job man
a tip from a nobody here....sand in circular motions, with a flexible, soft, pad over yoursand paper. it sands curvature more evenly than sanding with strokes. let me know if this works for anyone.
Love you are doing your own thing man looks good BUT for real get you a breather mask when you are working with them chems.
Thank you yea I know I’m the worse
episode 3 or 4?
Dennis Vanderben 🤣🤣 it was an accident this is 4
Dennis Vanderben part 3
🔥🔥🔥🔥 great job bro 👏👏👏👏👏
covered garage thank you 🙏🏻
Loving it bro dope
Good Job
WAEL KHADER thank you 🙏🏻
Awesome!
Honza Kubín thank you 🙏🏻
Nice!
chris Fiaccone thank you
Nice. good jobs)
thank you
Sick !!
the french call them riv-ehs
killan001 awesome
We call them riv nuts....we call rivets rivets....je suis francais
Not perfect but they look so good man
SOOBIGAN DIY thanks buddy 🙏🏻
First view first comment
Brandon Riley you were so quick on it youtube marked your comment as spam 🤣🤣
SUBSCRIBED I LOVE THIS AND I LOVE YOU
The Momo Show hey thanks love you too ❤️❤️
Dudes a real dub head! Do it all yourself
thepeopleswagen ayye thanks 🙏🏻
not to be that guy, but in the title it says Caron
GaBIT thanks for being that guy 🤣🤣
@ 10:39 ok boomer
Diamond Star Garage 🤣🤣🤣 I’m dead
Another unfinished car project