Hey Nezo here is my review of RDax vs mst rmx 2.5 RDX - super easy to build . Steering is awesome ...damper one of the smoothest...out of box with factory set up 9/10 ...i have upgraded the rdx with big bore shock and changed the front sttering geometry with little toe out also rear wheels i have added turnbuckle ...performace 10/10 ....i use topline wheels and tires 10.5t motor ares sky rc team powera xps sports pro jx hd servo and powerhd g1 servo with 60percent gain ...recevier flyky noble nb4 frgs4s ....i would say my spent around 450 usd and another 150usd custom duties shipped to india Rmx 2.5 s Build - good quality parts ...i use carbon high flex chasis and same electronic as rdx with similiar tires and 100 percent same set up ...gyro gain is 68 percent ...i have upgraded mst with aluminium steering set up and aluminium motor plate v2 ...however i think its misses rdx performance a little bit ...though fun to drive but rdx have more control and better adustibilty ...cost wise yes build is expensive usd 550 - 600 usd I would prefer rdx over rmx as the car has more potential and with few tweaks it can beat big names
Hey Nez0, love watching your vids and constructors digest. I have an rdx on order and has pushed out to end of April. So to get me sliding earlier, I’ve gotten my self a YD2 ZX as well. I was hoping to have your guidance while putting it together but no luck with a digest. I went for the ZX after watching the issues you had with the SD and the Md and being new to drift I thought I didn’t need the hassle. So, any pointers or things to be mindful of when building the ZX? Is also my first drift build, but not first rc build. Sorry for such a long winded question. Thanks mate, Dave
Hey David, thank you for watching! Yes there is no digest of the YD-2 ZX yet as i started that series of videos after I built my ZX. I should do one tho as several people around me have gotten a ZX recently. I do remember the build process being very good without any real issues. I have seen that some people have received 'manual supplement' sheets but Im unsure as to what info was on those sheets. I'm sure by the time i've responded (delayed my bad) that you will have assembled and started drifting your beautiful new machine :D Hopefully all is well and thank you again for watching! :)
Mostly this is down to tuning and driving techniques. I can drive the RDX similar to my MC-1, however I can currently push my MC-1 harder with higher angle corner entries.
Hmmm I love both those cars but for different reasons. The RDX reminds me of my competition MC-1 but in a fun-for-all form. The MRX GT has many upgrades and feels competition ready from the box.
I think they build the shocks with the shaft pushed in to get less, or zero rebound. The further out you have the shaft the more rebound you will get
Yes some people do build the shocks partially pushed in as a tuning preference.
Oh wow! So they did include a set of ballcups in the kit. Thats nice 🙂
Yiss it was nice to see that :D
Truly amazing car and so much potential. I hope upgrades are available soon
Yisss its very nice :D
thanks nezo!
Most welcomes!
Thanks for this video, helped a lot with building the shocks!
Thank you for watching! :D
Hey Nezo here is my review of RDax vs mst rmx 2.5
RDX - super easy to build . Steering is awesome ...damper one of the smoothest...out of box with factory set up 9/10 ...i have upgraded the rdx with big bore shock and changed the front sttering geometry with little toe out also rear wheels i have added turnbuckle ...performace 10/10 ....i use topline wheels and tires 10.5t motor ares sky rc team powera xps sports pro jx hd servo and powerhd g1 servo with 60percent gain ...recevier flyky noble nb4 frgs4s ....i would say my spent around 450 usd and another 150usd custom duties shipped to india
Rmx 2.5 s
Build - good quality parts ...i use carbon high flex chasis and same electronic as rdx with similiar tires and 100 percent same set up ...gyro gain is 68 percent ...i have upgraded mst with aluminium steering set up and aluminium motor plate v2 ...however i think its misses rdx performance a little bit ...though fun to drive but rdx have more control and better adustibilty ...cost wise yes build is expensive usd 550 - 600 usd
I would prefer rdx over rmx as the car has more potential and with few tweaks it can beat big names
Just to add I use rdx frp chassis and all my purchases are from rcmart rcart and asiatees
Great success and detailed info :D Thank you for watching! :D I do like the RDX just a bit more than the RMX's
❤@@BadShoppe
Hey Nez0, love watching your vids and constructors digest. I have an rdx on order and has pushed out to end of April. So to get me sliding earlier, I’ve gotten my self a YD2 ZX as well. I was hoping to have your guidance while putting it together but no luck with a digest. I went for the ZX after watching the issues you had with the SD and the Md and being new to drift I thought I didn’t need the hassle. So, any pointers or things to be mindful of when building the ZX? Is also my first drift build, but not first rc build. Sorry for such a long winded question. Thanks mate,
Dave
Hey David, thank you for watching! Yes there is no digest of the YD-2 ZX yet as i started that series of videos after I built my ZX. I should do one tho as several people around me have gotten a ZX recently. I do remember the build process being very good without any real issues. I have seen that some people have received 'manual supplement' sheets but Im unsure as to what info was on those sheets. I'm sure by the time i've responded (delayed my bad) that you will have assembled and started drifting your beautiful new machine :D Hopefully all is well and thank you again for watching! :)
Early in the video you mentioned that there's things you can't do that you can do with the MC-1. Can you elaborate on that please?
Mostly this is down to tuning and driving techniques. I can drive the RDX similar to my MC-1, however I can currently push my MC-1 harder with higher angle corner entries.
Bro one of my cars is like that car's alternative universe copy.
Great minds think alike :D
Forgot to mention for my rdx build I went with all OMG electronics, red, not purple sorry.
heheh i do like the red colour look but purple somehow always wins for me ;)
I recently sold my RMX 2.5rs and am leaning toward the RDX or MRX GT as my next car. Which would you reccomend and why?
Hmmm I love both those cars but for different reasons. The RDX reminds me of my competition MC-1 but in a fun-for-all form. The MRX GT has many upgrades and feels competition ready from the box.
Hi, what is the width from hub to hub at rear and front?
To be honest I went looking for the dimensions and Im having trouble finding them, they are not even printed on the box lol. Will try to get those.