I have to admit, I was skeptical. But my old fobs weren't working and were corroded inside. I bought a new one, followed your instructions, and BAM! Instant pairing and works like a charm! Thank you so very much for these clear and easy to follow instructions!
I just acquired a used Jaguar car today; noticed that the remote key buttons are not working. I came across this channel and followed the instructions. I was able to do it in just one try. Your instruction is very clear and helpful. Thank you very much. Aloha from Hawaii.
I work at locksmith shop in NC and after several failed attempt with MVP machine and thought "let me check youtube" come across your video and it programmed right up. Thank you sir!!
I had looked at several other videos about other years, their solutions didn't work for me. The Jag owner's manual says nothing about this. The high beam lever was the missing ingredient. Thanks so much. Power to the people, Cody.
Thanks my friend I’ve been having trouble with my remote for years I never had a idea what was wrong 😑 I thought I had to purchase a new remote sooner or later but I finally found this here video after changing battery after battery and now my remote is finally programmed man I can’t do anything but thank you 😊 with a lot of respect ✊🏾 your awesome 🤩
Worked great for me as well, however my Jaguar beeps only once when it goes into programming mode and once when it comes out. I programmed two fobs at once and here is how: Go through the procedure as described in the video, when in programming mode (after 1st beep) press unlock button on the key fob not in the ignition, then press the unlock button on the key fob that is in the ignition and remove from ignition. Now press lock and then unlock on both key fobs and they both should work. Good luck!
Just a heads up for anyone with the 2006 model. All you have to do is open the drivers door and you'll hear the chimes just press the unlock button 5 times with door open and you're done 😊
Thanks for posting. Only problem I had is when I program the new remote the existing remote doesn't work. If I reprogram the existing remote the new remote doesn't work.
Do you have to do this for each key you program or do you press buttons of all keys when in program mode? I have 2 new keys I’m trying to program. Does it also program key chip to car? I thought this needed a dealer software to do. Thanks
Does not work when the fob controller cannot hear the fob’s signals. Where is the fob control module located for a 2005 XJ8? And don’t say “the trunk”.
also for the x type ?? after 4 flash lights , you hear 5 beeps , then after every beep we can press any button 5 times ? you press 2 different ones ... i missed something sorry
Cody, Please help a Dumb Brit. You are doing things outside of camera shot. And your actions don't seem to follow your script. STEP 1. Sit in the car with the door closed or open. STEP 2. Place the key in the ignition and flash your lights. STEP 3. At the same time as you flash your head lights turn the Key to position I. STEP 4. After doing stages 1 to 3 and with the key in the off position the car will bleep (which means it is in Programming Mode). STEP 5. In "programming mode" the car will bleep Five times each time it bleeps you need to press a key button on the fob (When did you take the key it out of the ignition?). END OF PROGRAMMING. KEY SHOULD NOW WORK. MY CAR NO Please could you write the instruction up on the reply please. I don't think it is your fault this isn't working ,I think its my brain. Love your Video's.
I have to admit, I was skeptical. But my old fobs weren't working and were corroded inside. I bought a new one, followed your instructions, and BAM! Instant pairing and works like a charm! Thank you so very much for these clear and easy to follow instructions!
I just acquired a used Jaguar car today; noticed that the remote key buttons are not working. I came across this channel and followed the instructions. I was able to do it in just one try. Your instruction is very clear and helpful. Thank you very much. Aloha from Hawaii.
What year is your jag?
I work at locksmith shop in NC and after several failed attempt with MVP machine and thought "let me check youtube" come across your video and it programmed right up. Thank you sir!!
To think people are paying you 100+ to do something so simple is crazy lol make your money bro
Worked like a charm for my 2008 Jag XJ8 FOB. I also appreciate the written instructions. Made it easy.Thanks tons Cody.
Where are the written Instructions please I think they will answer my question?
Thanks Cody. Worked on my 2001 S type. Over the moon
I had looked at several other videos about other years, their solutions didn't work for me. The Jag owner's manual says nothing about this. The high beam lever was the missing ingredient. Thanks so much. Power to the people, Cody.
Thanks my friend I’ve been having trouble with my remote for years I never had a idea what was wrong 😑 I thought I had to purchase a new remote sooner or later but I finally found this here video after changing battery after battery and now my remote is finally programmed man I can’t do anything but thank you 😊 with a lot of respect ✊🏾 your awesome 🤩
Thank you so much man my key fob wasn't working change the battery still wasn't working did your simple trick thank you so much
Helped me for the second time, thanks man👍🏻!
And do not forget to do this with te door open😌
Sweet. Thank you. Now, if I could only use this same technique to cure my Cat's air suspension.
Worked great for me as well, however my Jaguar beeps only once when it goes into programming mode and once when it comes out. I programmed two fobs at once and here is how: Go through the procedure as described in the video, when in programming mode (after 1st beep) press unlock button on the key fob not in the ignition, then press the unlock button on the key fob that is in the ignition and remove from ignition. Now press lock and then unlock on both key fobs and they both should work. Good luck!
Yes that worked well for me on the 2 keys I have, Thanks from the UK
Well, that was as clear as mud.
Mine didn't beep but the reprogramming still worked. Jaguar S-Type 2002.
Thank you ... you made my life so much easier
Just a heads up for anyone with the 2006 model. All you have to do is open the drivers door and you'll hear the chimes just press the unlock button 5 times with door open and you're done 😊
I tried but still not working 😞 what can I do? Brand new battery
I am a little slow today-----When the headlight flashes 4 times do I remove the remote from the ignition and hit the button at each horn..??
Can you do that to a new remote?
ПОДСКАЖИТЕ ГДЕ НАХОДИТСЯ КНОПКА valet?
Worked nicely. Great!
I need your help I lost my only key and my battery is dead will this thing work with my 2002 s tpye
Thanks for posting. Only problem I had is when I program the new remote the existing remote doesn't work. If I reprogram the existing remote the new remote doesn't work.
this worked on my 2002 xj8 thank you
What is he doing exactly. Cutting the lights off and in 5 times or ?
OOOOOO IT WORKED :D wasted $5 on a new battery hahah. I tested the old battery when i removed it and was good. Thanks for the vid :)
Do you have to do this for each key you program or do you press buttons of all keys when in program mode? I have 2 new keys I’m trying to program. Does it also program key chip to car? I thought this needed a dealer software to do. Thanks
did not work with my 2002 S-Type 3.0
I don't know what the cause is
What about the 2017 xe?
Big man. Is there away u you can assist me? This thing is complicated for me. I have S-TYPE 2005
This work for 2011 xkr jaguar ?
any advice for a 2004 s type??
Thanks!
Thanks for the video👍👍
Does not work when the fob controller cannot hear the fob’s signals. Where is the fob control module located for a 2005 XJ8? And don’t say “the trunk”.
Dose that car bring Bluetooth ?
I will do this, thank you in advance
I will let you know
Great video.
Thanks Jim
Does ur key have to be programmed to the system. Just ordered a new one exact same one but its not working
Same for 2004?
will this also work to start the car?
also for the x type ?? after 4 flash lights , you hear 5 beeps , then after every beep we can press any button 5 times ?
you press 2 different ones ... i missed something sorry
That worked for me (2005 XJ8) ....thanks
What year models does this work with?
Also works on an XK8
Cody will this work for a 2010 XF Jaguar ?
What are you doing when the car bleeps?
BANKO007 ua-cam.com/video/OCCazYjW0mU/v-deo.html
Don.t work with my S type 2004.....What I can do? I try in different way....
Cosmin Mircea it's also not working for my s type 2004. My remote some times accepting key unlocking after many tries of pressing it.
Zahid Mahmood new battery?
Me too s type 04,new battery,didnt work!!!
Any information on how to program a FOB for a 2013 XF R?
Me too
How about for a 1993 XJS? I replaced the battery and now the damn car won't stop beeping when I turn it off.
Having the same issue as you are with our 93' Jaguar did you find the solution? I would assume so it was a year ago you replied to the video
Does it work on s type 1999 model ?
Hi, Do you have this for a 2004 x type 3.0?
if i get a new key with a no programmed chip , can we also do this ?? you teaching ??
Great Video. I programmed the remote and it works. Now my other remote doesn't work. What do I do from here?
Same here, I can only get one at a time going, do I program the one, the other won't work an so on?!
Do you press the button 5 times with the key still in accesory position?
How to cut a jay giant type s key
Cody, Please help a Dumb Brit. You are doing things outside of camera shot. And your actions don't seem to follow your script. STEP 1. Sit in the car with the door closed or open. STEP 2. Place the key in the ignition and flash your lights. STEP 3. At the same time as you flash your head lights turn the Key to position I. STEP 4. After doing stages 1 to 3 and with the key in the off position the car will bleep (which means it is in Programming Mode). STEP 5. In "programming mode" the car will bleep Five times each time it bleeps you need to press a key button on the fob (When did you take the key it out of the ignition?). END OF PROGRAMMING. KEY SHOULD NOW WORK. MY CAR NO Please could you write the instruction up on the reply please. I don't think it is your fault this isn't working ,I think its my brain. Love your Video's.
Read and Tried your Instructions. Didn't work. I will try another thanks
is not you derekk.....is this idiot...rude..liar son of a beep five times. then you pull the lights 4 times...close the door...liar
didn't work on a s-type R 2003
Hey, did you find a program sequence that works?
@@Stein_NZ No. I didn't try.
Man that shit works
It doesnt work for a 2005 XJ Vanden Plas
no need push remote 5 times,only one each remote
So you push the unlock button on the remote each time you hear the horn for 5 times or after the 5 horn beeps?
i think this fool does not know
Didn’t work for me
didnt work on my 03 jaguas s type
Didn't work on my 05 S Type either.
Doesn't work on 04 stype
Didn’t work on my 2003 s type either :(
Didn't work for my 05 x type either
Doesn't work
Doesn't make sense
Garbage did work
5?....
Does this work for 2013 jaguar XF?