5g Mimo Antenna
Вставка
- Опубліковано 22 тра 2024
- I have been working on this for the last 8 months and needing to hit so many frequencies can be difficult. Hopefully with the help of this video and the measurements in the PDF I have shown you that constructing your own 5G antenna is posable with some basic tools and a little time.
Template PDF: drive.google.com/file/d/1nlUO...
Want a cantenna: tinyurl.com/4duwr3kn - Наука та технологія
It's been a while. I always enjoy your videos and the knowledge, information, and ideas you share.
What a beautiful antenna. Great craftsmanship! 👍👍👍
Nice build! Glad to see you back with a new release. The antenna channels available on YT are quickly becoming fewer and further between.
A question I’ve been wanting to ask pertains to your test bench. Is your analyzer Scalar? I ask because I have been seeing a number of HP Scalar Network Analyzers with ranges into the 60ghz for next to nothing. And they are in great condition.
There are a few videos around on the differences between Scalar and Vector N.A. If in all your free time you might record some thoughts on the topic, a lot of us will be greatly appreciated. I thought you had before but I looked in past videos and didn’t find it.
Thanks for the great video. If ever you’ve the time, I know myself and a few other viewers would appreciate the opportunity to pick your brain during a live stream. Something to consider. Glad to see you’re still with us.
This is amazing, you hit all the sweet spots.
Hi there, thank you for the very elegant design. @ 3.40 you mention a simple aluminium jig to align the 37mm vertical tubes prior to soldering. you state that the jig is made with "5mm". Is that correct? Again many thanks. May I also ask the height of the elements?
that is art!
I'm very grateful to Andrew Mcneil, his videos have helped me a lot repect to wifi antennas and its modifications.
Hi Andrew, it would be fantastic if you could do a video on filters. Addressing how to filter out noise with and without amps such that you have looked at before.
I used to develop Drones for my old company here in Singapore using the 433mhz freq for controlling and tellemitry and I used a 2.4ghz frequency for the video and control of other drones due to regulations with a 10watt amp and a directional biquod antenna.
So Addressing filtering out additional noice is very important while having a powerful yet compact mobile set up.
Thanks as always
Chris
This is an antenna I have no need for since i had my covid boosters.
But they are overrated, I only get around 5db gain and I had 3 boosters already.
great one andrew
do thickness of brass play any role in quality or range drastically ?
If you use thicker brass say 3mm on the reflector you would get a better front to back ratio (0.5 db)
@@andrewmcneil that was quick
thank you very much indeed
This would look nice in a clear box with some blue led lighting.
Hope to see this build in actual test..or in field test..
very nice design , and excellent performance.. :👍, Can this be modified for n78 5g band ?
too complicated for me. I'm sticking to wifi antennas.
Will we be seeing this antenna on eBay for those who are hopeless at DIY. If so you have at least one customer.
As you used the blowtorch to heat the metal I noticed the base plate was not flat.
Will this effect the frequency being that the square plate seemed warped?
İyi günler, ben Türkiye'den sizi severek izliyorum yaptığınız çalışmalar mükemmel. Bende hevesliyim anten yapmak için. Sizi izliyerek 3 anten yaptım elim yatkın bu işler için. Şunu sormak istiyorum 4.5g. 900mhz -1800mhz bu antenle çalışırmı.
Brass or copper is better for capturing mobile signals ?
Sorry to ask here. What if we want to build a GSM amplifier antenna? In order not to connect antennas to any device specifically. Thanks.
hello Andrew, good evening Indonesian time. I have subscribed and liked all your videos on UA-cam. Sorry, can you make and review Antena WajanBolic E-Goen 2.4 GHz Thank You.
sir, i have designed an omni antenna at 900MHz having the length of 1500mm and the diameter is 6mm, now i want to connect with RJ58 cable, how can i connect sir? i have tried the direct wire soldering to the bottom of the rod but it didn't sticked. please help me sir, thanks in advance
I have to build one of these and put it in my tree in my front yard. It's 150' up. What do I need to do to reduce signal loss? Or is there no way something like this will work to be fed into my house as a repeater?
Get an outdoor 5G router such as Huawei CPE Win or ZTE MC7010, there'll be no signal loss since there is no coax. At these frequencies signal can bounce off walls etc and the usual "height is might" might not necessarily apply.
Could you use copper instead of brass?
Does anyone know is there such a thing as a fractal (flat) antenna for 5g LTE..I would love to have a series of flat antennas on the inside of my top floor window to suck in mobile internet. Appreciate any thoughts. I only ask about fractal antenna as its flat and would be easily mounted on a window pane..thx
What do I do with it once I build it? (Asking for a friend)
Is it possible to use the 4G frequency?
How much gain can be made?
Theoretically around 5db but it is only an estimate that’s why I did not include it
@@andrewmcneil how do you estimate gain of antenna practically ?🤔
@@testports3216 Just experience building and testing
@@andrewmcneil Rsrp value ?
nó hoạt động trên băng tần bao nhiêu
Alt yazılara Türkçe eklerseniz sevinirim.
Can you comment on this video: ua-cam.com/video/BpSkjRKGxyc/v-deo.html - Mobile signal booster homemade DIY for off-grid house Internet without electricity - Programmer Offgrid. She turns a length of coaxial antenna into a path for transmission and receiving. I'd be interested in hearing your comments on the physics of this design, how one might improve it and anything else you might have to say on the matter.