Rhino3d Tutorial - Engine Cover - Adding Local Detail (2 of 3)

Поділитися
Вставка
  • Опубліковано 26 сер 2024

КОМЕНТАРІ • 58

  • @jeremydemarco8697
    @jeremydemarco8697 2 роки тому +1

    Learned a lot !!! NURBS are definitely the noble part of 3D design

  • @SimplyRhino3D
    @SimplyRhino3D  8 років тому +2

    Hi everyone, Number 3 in the series just published - this completes the engine series - enjoy!

  • @chenteliu1550
    @chenteliu1550 3 роки тому +1

    You're a great teacher with the most clear tutorial!
    Thank you soooo much for this channel, it really helps.

    • @SimplyRhino3D
      @SimplyRhino3D  3 роки тому

      Great, glad you enjoyed our video and find our channel useful, thanks for watching!

  • @abhishekgaur6449
    @abhishekgaur6449 4 роки тому +1

    I really liked your video tutorials and how you explain. I don't know why good stuff is always have less likes and subscriptions.

  • @NitroMani
    @NitroMani 7 років тому +3

    The best Rhino training i’m aware of. Thanks!

  • @asian1nvasion
    @asian1nvasion 8 років тому +1

    Was looking around the channel for the 3rd part of this tutorial. Can't wait to see the workflow between Rhino and Solidworks.

  • @alex630710
    @alex630710 7 років тому +8

    Simply the best!!!!
    Great tutorials, thanks a bunch.

  • @pedrohenriquefigueiredomag6849
    @pedrohenriquefigueiredomag6849 8 років тому +2

    Thank you Phill Cook and SimplyRhino for making these videos. This series is amazing !

    • @SimplyRhino3D
      @SimplyRhino3D  8 років тому

      Glad you're enjoying the series Pedro, the final one in this series will be posted in July!

    • @pedrohenriquefigueiredomag6849
      @pedrohenriquefigueiredomag6849 8 років тому +1

      Great ! Hope you keep doing these kinds of videos after this series. Thanks again for the very clear and thorough explanation.

  • @carlfogarthy6508
    @carlfogarthy6508 Рік тому +1

    Great! Thanks

  • @fernandopinto5464
    @fernandopinto5464 2 роки тому

    This is simply great. I've been looking for something like this for a long time

  • @FleckGuitar
    @FleckGuitar 6 років тому +2

    Thank you! You simplify the complex so easily.

  • @tegan71969
    @tegan71969 8 років тому +1

    Great tutorials so far. Looking forward to No 3 in the series coming out soon.

  • @TessierWork
    @TessierWork 8 років тому +2

    This is so informative. Thank you so much. Can't wait to see part 3

  • @sheepdog90
    @sheepdog90 7 років тому +2

    great tutorial - thanks for the in-depth explanation!

  • @bobbycheng4458
    @bobbycheng4458 2 роки тому

    I am new user in rhino,thx for your video,it is very useful!

    • @SimplyRhino3D
      @SimplyRhino3D  2 роки тому

      Great, thanks for watching and enjoy learning with Rhino!

  • @mack7207
    @mack7207 5 років тому +1

    Excellent Explanation as always

  • @AlbertDegin
    @AlbertDegin 5 років тому

    Thank you very much. Very nice tutorial.
    You have a pleasant voice) It is good for attentive listening

  • @faye9756
    @faye9756 6 років тому

    Excellent teacher! Enjoyed every minute of your lesson!

  • @bigerosk
    @bigerosk 6 років тому

    thank you for this video i have understand a lot of phylophy how works with rhino

  • @maniteja332
    @maniteja332 2 роки тому

    Just excellent !!

  • @ssoyoming9306
    @ssoyoming9306 4 роки тому

    amazing ....
    thank you for this video!!

  • @oB19o
    @oB19o 3 роки тому +1

    what if we had a predefined max height/depth for the "scoop"?

    • @SimplyRhino3D
      @SimplyRhino3D  3 роки тому +1

      Hi Joao. In this case I’d use a 2D reference with the heights defined so that I could snap geometry to it.

  • @fernandoprieto1340
    @fernandoprieto1340 7 років тому +1

    extremely useful

  • @BrunoSedja
    @BrunoSedja 8 років тому +1

    amazing video!!

  • @PorscheMonster
    @PorscheMonster 7 років тому +1

    Bravo!

  • @bernardocriscuoli6359
    @bernardocriscuoli6359 4 роки тому +1

    Congratulations!! Your tutorials are amazing! I have a question though... When I use the trim tool and I tipe "crv", Rhino asks me to draw the line and not to pic one the edges... do you know why? Maybe I have a modern version so the commands are different?
    Thanks and congrats again!

    • @SimplyRhino3D
      @SimplyRhino3D  4 роки тому

      Hi Bernardo. Thanks for your comments. The commands are the same in the latest version of Rhino. Just to be clear, the command sequence is this:
      Trim
      Enter to run Trim
      You should see this prompt ‘Select cutting objects ( ExtendCuttingLines=No ApparentIntersections=Yes Line )’
      Don’t select any options but type in ‘Crv’
      Enter
      You should see this prompt again ‘Select cutting objects ( ExtendCuttingLines=No ApparentIntersections=Yes Line )’ now you can only select curves or surface edges

  • @SpringBreak-3D
    @SpringBreak-3D 5 років тому

    Do you know why i can't choose "Rail curve options" when i choose "Do not simplify" ?? You can in the video but for me it not allows me. When i choose Rebuild with or Refit within it works (37:08)

  • @Mitsui_to
    @Mitsui_to 2 роки тому +1

    Excuse me, this might seem like a stupid question but, what is the difference between blend edge and fillet edge?

    • @SimplyRhino3D
      @SimplyRhino3D  2 роки тому +1

      Hi Timotius. In simple terms Fillet Edge creates a tangent continuous fillet which is arc based whereas Blend Edge creates a curvature continuous blend that is spline based. Hope this helps.

  • @zaromit
    @zaromit 4 роки тому +1

    Thanks 35:07

  • @seancowell2991
    @seancowell2991 8 років тому

    Excellent Phil... really enjoyed that, great example of tween curves.
    Enjoyed the first one too, reminds me of Tolkien's trilogy... i hope the 3rd one comes out before Christmas :-)
    Is it always good practice to run the intersection command prior to trim?

    • @SimplyRhino_UK
      @SimplyRhino_UK 8 років тому

      Thanks Sean, next one coming in July, so well in time for your Christmas stocking.
      In answer to your question 'Is it always good practice to run the intersection command prior to trim?' Then I would say where the geometry becomes more challenging and more complex surfaces are generated it is often the case that trimming with an intersection curve will generate a result where trimming surface to surface will not. Hope that answers your query?

  • @3Prelude
    @3Prelude 4 роки тому

    Reference around 2:30, why didn't you just use project crv instead of extract iso crv? Or even extrude the original curve and cut using that?

    • @SimplyRhino3D
      @SimplyRhino3D  4 роки тому

      Hi. Thank you for your question, I did try to explain this in the video but I used the Iscocurves because I wanted curves that followed exactly the topology of the surface in both U and V. This will allow the intake shape to follow that of the engine cover and, perhaps more important, will give me the best possible chance of creating the smooth seamless transition at the leading edge of the intake.

  • @xilefx
    @xilefx 7 років тому

    how are your handles so big?

  • @xilefx
    @xilefx 6 років тому

    that enviroment map zebra ocd though

  • @christophermichaels8148
    @christophermichaels8148 2 роки тому

    Do you offer downloadable training classes

    • @SimplyRhino3D
      @SimplyRhino3D  2 роки тому

      Hi, thanks for your question. Currently our training all takes place live and online, those attending the live training sessions get a recording of their sessions to refer to. Our upcoming courses are shown here: simplyrhino.co.uk/training/training-events-schedule

  • @tuscanland
    @tuscanland 3 роки тому

    Hi, do you do work upon commission for third parties?

    • @SimplyRhino3D
      @SimplyRhino3D  3 роки тому

      Hi, Normally we train individuals or teams on how to model in Rhino for themselves. But, if you want to contact us at Simply Rhino with details of your project, please do so and we’ll then discuss how best we can help. Thanks.

  • @under2641
    @under2641 8 років тому

    Can I ask why did you trim the base surface with half of bottom line (right side) in 31:45?
    And is the extended curve on surface clean enough?

    • @under2641
      @under2641 8 років тому

      And in 38:40, does it mean that "join" change the geometry of surface?

    • @SimplyRhino3D
      @SimplyRhino3D  8 років тому

      Hi Yusuke,
      The fillets that built initially did not complete so there was no surface trimming. I used the parts of the fillets that were correct and curves (some extended) from the usable edges of the parts that didn’t build properly to give me a set of curves to trim with.
      Whether you have trim with curves, surface edges or extended curves, the result is always a trim fitted to a tolerance (ie the curve will have more control points than the surface it’s based from). I would try to avoid this for major surface features but it’s a not a major problem on areas like this.

    • @SimplyRhino3D
      @SimplyRhino3D  8 років тому

      Hi Yusuke,
      Thanks for your question - I didn’t make this clear in the video. Joining doesn’t change the surface geometry. The surface analysis tools (including Zebra) are mesh based - they give a representation of the surface. The mesher in Rhino will display smoother transitions if surfaces being analysed are joined so it’s worth joining surface edges before analysis.

  • @aktastaban3673
    @aktastaban3673 6 років тому

    Hi Phil
    You fixed the Blend Edges that rhino couldn't do. With Rhino 6, that fixing isn`t necessary? Does Rhino6 finish the all that work at the moment 22:30?
    Thank you

    • @SimplyRhino3D
      @SimplyRhino3D  6 років тому

      Hi Aktas, the Solid Fillets and Blends are more robust in v6. I haven’t tested v6 with this particular example though.