COOL INVENTIONS FOR YOUR GARAGE THAT YOU SHOULD SEE
Вставка
- Опубліковано 3 лип 2024
- Mind Warehouse ► goo.gl/aeW8Sk
1. KINCROME Karbon Creeper
• KINCROME Karbon Creeper
/ @kincrome
2. BendPak MDS-6LPF
• BendPak SP-7X 996 Turb...
/ @996turboscabrioletgar...
• MDS-6LPF - Install wal...
/ @xeontis
3. Norbar ProTronic Plus
• ProTronic™ Plus Promo
/ @norbartorque
4. Powerbuilt Ratcheting Caliper Piston Tool
• Powerbuilt Ratcheting ...
/ @powerbuilttools4149
5. Spill-Free Funnel
• Lisle 24680 Spill-Free...
/ @lislecorporation
6. Sealey VS0571 Brake Disc Calliper
• Sealey VS0571 Brake Di...
/ @sealeytools
7. Matco MT2612
• Matco MT2612 - 1/2" DU...
/ @matcotoolsvideos
8. DIY car ramp (Preview)
• Автомобильная мини эст...
/ @tetboi
9. Powerbuilt Universal LED Brake Fluid Tester
• Powerbuilt Universal L...
/ @powerbuilttools4149
10. Eastwood Super Flex Tool Tray Set
• The Best Tool Storage ...
/ @eastwoodco
11. Eastwood COB LED Flood Light
• Super Bright Rechargea...
/ @eastwoodco
12. AstroAI Air Compressor
• AstroAI Dual Powered A...
/ @astroai
00:00 - KINCROME KARBON CREEPER
00:57 - BENDPAK MDS-6LPF
01:42 - NORBAR PROTRONIC PLUS
02:24 - POWERBUILT RATCHETING CALIPER PISTON TOOL
03:14 - SPILL-FREE FUNNEL
04:05 - SEALEY VS0571 BRAKE DISC CALLIPER
04:53 - MATCO MT2612
05:38 - DIY CAR RAMP
06:34 - POWERBUILT UNIVERSAL LED BRAKE FLUID TESTER
07:15 - EASTWOOD SUPER FLEX TOOL TRAY SET
08:10 - EASTWOOD COB LED FLOOD LIGHT
09:07 - ASTROAI AIR COMPRESSOR
For copyright matters please contact us at: copymanager.mn@gmail.com Dance of the Pixies by Machinimasound licensed under Creative Commons Attribution 4.0 int’l / @incredible-qq2zi
That Ramp is a disaster waiting to happen. The bottom should be connected all the way with a beam instead of a cable. Also add some trusses (forming triangles) to prevent buckling. It almost flipped over and I can't believe they show that.
Build it how you want it. It's a homemade tool
Those were some sketchy ramps!
Gave me a heart flutter watching the car go up and down it, but it's home made,so if it works for him.
@@edwardwade2696 if its not sketchy then it wasn't homemade. that's like half the reason to build one.
yes it could kill me but I built it so it won't. maybe if you use it it might.
haha.
Ramps were bound to fail - never seen a 'master welder' in open toed sandals before!!
This must be the sharper image version... Nearly everything was total junk, except the over priced lift and the creaper which is pretty much a standard design and unremarkable. Those car ramps were a death trap and nearly failed in the video.
Damn, I am so glad somebody finally invented car ramps. Can't imagine how we have done without for so many years.
I think the fact that those newly invented ramps were sooo stable they were hardly tippy at all is the real point here.
@@stebstebanesier6205 seemed pretty tippy when he was driving up them.
🤣🤣🤣🤣
Holy crap, a radiator funnel?!! I’ve never known those existed!!!! Or that you can get one on Amazon for $20 that’s less than 50% of the price. Lmao.
82 bucks for something a $15 micrometer and a metric ruler can do with just one extra step? I’ll spend an extra minute and save 67 dollars.
Radiator funnels with the removeable stopper are used by almost every mechanic in the industry, and have been for decades. And in a modern garage the rotor tool is fairly useless. It's usually cheaper/the same price to replace rotors that it is to re-machine them. Due to this, most times shops just replace the rotors anyways. Not to mention, if you're having brake issues , you should be taking the wheel off to inspect your pads and caliper functionality as well.
I’m so glad someone finally made a torque wrench that I can connect to my phone. Every time I work on my car I find myself wishing I could torque bolts to spec from my Samsung smart-fridge
Lmaoooo
Congrats to everyone who is early And who found this comment 👏 ❤.
Thank you this good good vibe was highly needed
Sorry, I'm already a Married man.
Sweet treat. Single?
Bot
Para a pessoa que está lendo isto: Espero que você consiga realizar todos os seus desejos este ano! .😊✨🍃❤️
That ramp looks dangerous.
This is the best one yet
Those ramps are as dangerous AF!
man those ramps almost failed on the video lmao
That funnel is very handy.
I must say I’ve never seen a work light. That thing you lay on to slide under a car….never seen one of those either. Thank you for the must see shop tools.
😅👌
Mini air compressors are great, Lowes has a Kobalt, rechargeable battery, digital compressor, works great. Same battery powers the impact gun, and much more.
Come on, that rubber tray is ridiculous.
That ramp set look pretty sketchy to me
The majority of those are on Amazon for a fraction of the cost, that brake caliper tool I got it for 22 bucks and the plastic coolant tank is like 17. I do like the lift tho
Alot of these can be made like a caliper tool. Hose pliars etc.
i was thikning the same thing lol
I like the torque and creeper
I would put a magnet 🧲on the creeper so if you drop your blots or tools you can use the creeper to pick them up when you are under a vehicle
Good stuff on here and Thanks for sharing.
$46 for a Dollars worth of plastic to purge air from your car is a bit much. You can find it sometimes under $25 Dollars if your shop around.
The ramps, LOL. I can't imagine the damage they will do to the bottom of the car when they tip over. I'm sure at a minimum the bumper will be gone.
I saw the same thing! I suspect all he needed to do was extend the bottom bars towards the ramp portion.
Nice idea, but it needs some improvements. I could see many failure points.
@@JamesSmith-jq2jc just measure up a commercially available one and copy.
@@ianmontgomery7534 exactly. I actually like those ramps you see at car dealerships that they drive the whole vehicle on. It's close to having a vehicle lift.
Yup. No thanks on those ramps.
2:26 Jesus where has this been all my life? I do work on my own vehicles. Just did full brake job on my Escalade. New rotors and pads all the way around. I'm still using a large C clamp and an old brake pad to retract the pistons. LOL
Great job on the ramp! But.. of they had made the base plates about 4-6 inches wider? I think you'd have better balance and less chance of tipping,like it did... other than that it looked great.
Do the ramps come with an SOS button so you can alert your wife or friend that you are trapped under the car when they give out!
The matco right angle air impact is a good tool; but only worth it due to the lifetime warranty. Mine has broken at the neck 3 times in the past two years. As for the roll up ramps, just buy cheap pre made ones for $40 that you know are engineered to hold the weight stably, and they won't almost flip on you like in the video lmao
🤣🤣🤣🤣 that coolant system has been out for so long now. It's not new.
That funnel has been out for hundreds of years its original name was oil can with the bottom cut off
I kind of like the brake tool.... but... you can also use a small flat piece of metal and a C- clamp to do the job!
I guess if you don't have these most basic of tools and want to do your own brakes? Then, yeah, I could see spending that if one didn't know better..
It is pretty cool,I'll have to admit..
There's so many things wrong in this video that could do so much damage to you and your vehicle, like the car ramp looks good on paper but if you actually have worked on cars I wouldn't recommend it, just buy a quality 6 ton jack stands and quality jack and be safe 👌
That homemade car ramp looks unsafe
2:24 Ha! Finally a tool for pushing back brake calipers! LOL. I've always just used a block of wood and a c-clamp! 😁💯😎🤘
The air ratchet was the only interesting thing, Snap On has one.
Ryobi’s new pblrc25 electric ratchet gets 72 lbs/foot fastening torque and kicks ass. For a fraction of the price of a snap on comparable. Air tools are yesterday’s news
Even though the ramp is dangerous, I am hoping I can buy the exact same model. I live on the edge.
Yeah I hope mine comes with a little less weld material a little bit sketchier on those seams because I like to live super dangerously and I'll get a huge rush knowing it could fail at any time
4:30 most vehicles have dust shields behind the rotor, so this won't give you very accurate measurements
The heat shield doesn't go near the caliper which would give you enough room
@@Alucard-gt1zf dust shield, not heat shield, and it's measuring the rotor
I normally skip the ads to get to the content - this time I skipped the ads to..........get to the ads.
I've seen the tank/funnel unit has been used by Rainman Rays Repairs on UA-cam and worked really nice. It was the first time I saw one.
Very good
These must be gadgets for the Rich and Famous because I can't afford any of them
Those home-made ramps are dangerous! I wouldn't want to work under a car supported on those.
Car ramps are dangerous!
Interesting content but horrendous background music, if you can even call that racket music.
Nice invention❤❤❤
“Garridge” 🤣
Nice brake rotor thickness gauge, but unless you have the books out for the vehicle or you have filled your brain space with random specifications you need to pull the wheel for access to the thickness specs.
Except you need to accurately measure them and that tool cannot actually do that. Total junk. $20 calipers will do a far better job and cost 1/3.
How many brakes don’t have a backing plate that would interfere with measuring. Don’t buy it
Same again that ramp design needs revising
The floodlight isn’t as good as a headlight.
So, what are the brake piston compressor tools for if the brake pistons retract automatically every time you release the brake pad, making the brake rotor caliper a necessity?
As pads wear down sometimes the pistons can get stuck making it difficult to install new pads and get them over the rotor. I usually use a bmf pair of Channellocks to compress the piston.
Never did your own brake work, have you?
Where do you find the cost and purchase area
For $5400, I could get a normal two post lift and remodel the ceiling of my garage to allow full lift height. And probably still have some money leftover. The price of that scissor lift makes it useless compared to better full sized lifts for cheaper. Scissor lifts aren't new inventions either.
9:20 be careful not to blind yourself or neighbors with that obviously super bright light...
Where do you buy them?
WOW !🤩
When i turn it down so the noisy background sound is gone so that speech is understood i can't hear you
Who's going to forward me the money?
Be aware that the caliper retracting tool is; 1) Extremely cheaply made, and 2) THIS ONLY WORKS FOR CALIPER PISTONS THAT DO NOT HAVE TO BE ROTATED TO RETRACT. If you use it on pistons that need to be rotated to retract, you will damage the pistons, the caliper AND the tool. The disc measuring caliper only works on wheels with wide open spokes. Steel wheels, forget it. There are also better ones with digital readouts for cheaper. The ramps, easy to make. But those ramps are too short and therefore unstable, and too weak for anything but a smallish car. I built mine with integral jacks in them to take a big block F350 4x4...but "Garages without a pit"? When was the last time you saw a garage WITH a pit that wasn't 100 years old? $50 for he brake fluid tester? Amazon for as little as $11. Same thing. I have a number of Eastwood tools and they are very good, but I don't like the rubber tool tray. You need solid stability not flex in a tool tray particularly when working in the engine bay itself. I prefer my magnetised stainless trays with a thin rubber coating on the inside. The tray won't slide and the tools in it won't slide about. The Eastwood CO B light is ok, but expensive. I have half a dozen COB lights for the same price. Not quite as bright and no radio, but plenty good enough with hangars and magnetic bases.
Great content . I like the idea of the drive-on ramps but I would stabilize the front supports to prevent ramp tip over ! Also I would secure the ramps in a manner that would allow easy removal for more working room . Thank You .
🇺🇲🇵🇷🦊👍
Drive on ramps you say? Go to Canadian tire
I built my own many years ago. I stacked 2 by 10s to support the car, with removable ramps.
i have the funnel and it is a life saver. antifreeze is 16$ a gallon with this you will not spill a drop
Five minutes to get to 35 lbs is horrible. Specially if you are running big tires that max at 51. I’ll stick with my dewalt 60v compressor or just go to any gas station near me that has free air.
Yikes, that last item is 50 dollars on Amazon, ouch. There are many cheaper ones that are just as good and even from the same manufacturer.
Get that creeper with all the same features for $30 at HF. $25 with a coupon.
HF still have coupons?
As opposed to someone else's hands. :)
I was just at Walmart not more than a half hour ago looking for some automotive ramps so I could change my oil and wouldn't you know what automatically pops up on UA-cam!😒
$145 !!!! Do you realise what I could get for that in Bangkok ?
incurable gonorrhea
Did he say that air compressor would "FIX" a flat tire? How does that work.
YT Magic
I like great tools ♪
So that left only goes up 48 in which means you would have to be on your knees or pretty much laying down the whole time unless you were four years old
Little people want to work on their vehicles too. When the Aussies are not tossing them in competitions.
Don't reinvent car ramps. And that isn't a reliable pair either.
oyage vidio nam pattai awa balanna wenama welawak ganna ona. oya drop shiping karanwa athi ne mata utharayak denna . ebay akata dana photo wala diga palla cochchara wenna onada thank you
2:25 Can't you do that with a C clamp? I always did.
5:40 That's great as long as you have all the tools and benches.
Bhy i love you
Most of these are 40 years and old or older nothing new
Very Good!... 42 🐄🦉🏴☠✝
$140 for plastic with some padding and casters? Lmao I’ll stick with the performance tools or hf versions for $30 that’s 22% of the cost
Bruh that thing for car cooling fluid is waste of money,just fill your cooling system to max,turn on car wait a few mins and add more fluid if needes🤦♂️
sooo, where are the "invetions" ?
Please get it - most of the world work in Metric system information...ok?
Why are you mentioning units of measurement and currency in a mix of kg and Lb and $ and pounds. Why not just make it in either one or other. Preferably metric and in a dollar value.
La base del sollevatore è sbagliata, dev'essere a tronco di piramide!
WHAT...exactly IS A "GARE IDGE"?.....guh..rodge
The auto repair industry is the worlds biggest Chinese junk tool scam.
LMAO 6:20 that is dangerous. The ramp should be one solid piece so if you overshoot it, there is some safety where it wont tip. on their own video it shows the ramp tipping side ways. It's really not worth the risk. Build a solid piece construction one.
creepers are overated. they are pretty shit, you dont have a lot of room under the car and creepers tend to take about a good 2 inches of space, secondly when you're undoing bolts, your back needs to be firm up against the floor so you can put all the power onto the bolt. Creepers make you roll all over the place when trying to undo tight bolts.
You display alarmingly rudimentary knowledge of the products you show.
The scissor lift for example you say is the “most efficient in its class. “Since when is this a valuable measure of a lift? And having to cut out and reform concrete does not make installation “simple”
Braking distance does not crease with rotor wear.
The list goes on.
You should delete that ramp set. A friend of mine died from using auto ramps. They were built by a reputable company and commercially available but failed on him and killed him. They are the most dangerous thing ever developed and should never be promoted. If you can't afford a Jack and Jack stands then don't do car work.
6:19 Oh, hell no!
Someone is going to die with them death trap ramps! Not even triangled them legs are going to blow out!
Isnt it high tide to change the background music ore preferabel no music
Looks like greed
On all overpriced products
Making a crappy ramp at home is not an invention.
Those are the worst car ramps I've ever seen.
Torque wrenches and caliper ratchets have been around since the sixties and can both be had for wayy cheaper than said in this video. Not a new or cool invention
ALL ITEMS introduced here are WAY OVER PRICED! Not worth it... Especially, that ramp, a joke to say the minimum... even at the of shooting that video, that ramps almost fall apart... accident waiting to happen!!
Harbor freight sells creepers for $30. They're just as comfortable as these and have the side pockets and hanging handle. You could buy 4 of the harbor freight creepers for the price of one creeper from this company. Must be the fake carbon fiber look that makes it so expensive. Not really a cool or new invention.
Yep most of the stuff is over priced must admit though who would have thought car ramps ...can be used to raise the car off the ground.... what next....a bigger hammer to hit things with....I wait with baited breath....
I've got a plastic ramp that holds my 3800lbs car way better than that junk dude built.
Boring, too expensive, I wouldn't buy any of those items.
so glad that guy tested those sketchy ramps on a shit car. i would NOT trust my life to something like that, nor would the product carry any certified capacity rating or liability due to product failure. you can get good ramps for under $100 so why would you spend all that time just to save maybe $20 and put your faith in your work with a car hanging above your head
6:19 6:28 Not liking this. Looks dangerous.
First boi
I deserve a pin please.
Warn
Way overpriced
👍😎🍺🍩🛠️