Qtech P019 Airless Paint Sprayer - Entry Level Q Tech PO19

Поділитися
Вставка
  • Опубліковано 9 лют 2025
  • Taking a look at the Qtech PO19 (Q Tech QPO19) entry level unit. Great airless sprayer for under £1000 to get you into spraying. I'll be comparing against the others in the same category soon.
    You can pick these up fairly cheap online now.

КОМЕНТАРІ • 42

  • @sprayaholic
    @sprayaholic  3 роки тому

    Check this video out next ua-cam.com/video/4PF3X9sm6YU/v-deo.html
    Cleaning the ball bearing cage

  • @wattocornwall
    @wattocornwall 3 роки тому +1

    Loving the new studio set up x

    • @sprayaholic
      @sprayaholic  3 роки тому

      Haha no quite studio set up. More shanty town recordings

  • @niftyoshea
    @niftyoshea 2 роки тому +1

    Were can I get a pressure gauge

    • @sprayaholic
      @sprayaholic  2 роки тому

      Ebay ive got a few from before. The 3000 or 4000 max psi ones. But any sprayer seller can supply branded ones

    • @niftyoshea
      @niftyoshea 2 роки тому

      Thanks mate

  • @jasonbarnett1085
    @jasonbarnett1085 3 роки тому

    Why is my qtech190 not priming or spraying.

  • @alangoggins7467
    @alangoggins7467 3 роки тому +1

    Hi there, I'm looking for a gun that does wall paint, oil gloss and shellac. Is there one you recommend? You really know your stuff.

    • @sprayaholic
      @sprayaholic  3 роки тому

      Hey thanks for the support. Basically any branded gun from tritech, wagner graco titan etc will all do the same. Its the feel and build that makes them different. Its all down to the tips that make the difference. With airless anyway. Hvlp would be different.
      So youd just need a variety of tip sizes for each application, a smaller one for woodwork mainly and wider for walls. My main 2 are 210 and 310 for woodwork.
      516 and 619 for walls are my other main two

  • @scottwyld9112
    @scottwyld9112 3 роки тому +1

    Got a problem have that qp019 sprayer but as I'm spraying it reduces down in pressure no leaks anywhere and have new filters in the gun and on the end of suction tube? If I let off the pressure builds and can spray again ? Can you help !!

    • @sprayaholic
      @sprayaholic  3 роки тому

      Silly question but is the filter in the gun the right way up?

    • @MrLeshop
      @MrLeshop 3 роки тому

      Or try tightening the nut with the bar it came with

    • @simonhuss9619
      @simonhuss9619 2 роки тому

      Sounds like the tips blown and machine can't keep up with it, or your using to big an orifice size, I know machines say 21tho but that's pushing it, and any slight wear on that size tip pump will not be able to keep up with it

  • @scottchapman2546
    @scottchapman2546 Рік тому

    Hi mate iv just ordered the qt190 version. Will this need piston lube applied before use and if so where do you apply?

    • @sprayaholic
      @sprayaholic  Рік тому

      Hey. Yes you apply it where you can see the top of the piston, theres a packing nut which has holes in it. You should be able to see where i mean hopefully. Let me know if youre still unsure

    • @scottchapman2546
      @scottchapman2546 Рік тому

      @@sprayaholic thanks very much for the reply 👍 much appreciated. Brilliant videos by the way. Helped me make a choice on this sprayer

    • @sprayaholic
      @sprayaholic  Рік тому +1

      @scottchapman2546 ive got the new new model aswel. Its a brill unit for the money. I have a hopper for.it too. So a few videos will be coming soon

  • @paulmorgan1636
    @paulmorgan1636 3 роки тому +1

    What is actone is it cellulose? Appreciate the videos thanks 👍

    • @sprayaholic
      @sprayaholic  3 роки тому +1

      Its like nail polish remover. It evaporates fast and pretty sure you can use it to neutralise between oil and water.
      I pick it up from amazon or ebay in 5L tubs. Just search acetone. Its handy to have

    • @sprayaholic
      @sprayaholic  3 роки тому

      You could soak in warm soapy water but it wouldnt have cleaned it as fast

  • @MrLeshop
    @MrLeshop 3 роки тому +1

    They good little machine Col.
    I see y still haven't tried the tritech flat tip setup then..
    You don't know what your missing fella trust me

    • @sprayaholic
      @sprayaholic  3 роки тому

      ha i know. an expense i havnt accounted for as i dont have the gun. didnt you say you needed like the graco silver line gun?

    • @MrLeshop
      @MrLeshop 3 роки тому +1

      @@sprayaholic type in..
      flat tip filter housing
      Screws straight on your gun your using

    • @MrLeshop
      @MrLeshop 3 роки тому

      @@sprayaholic think it cost £50
      Housing filter and tip holder then the tips are £17

    • @sprayaholic
      @sprayaholic  3 роки тому

      @@MrLeshop I'll investigate now while i remember

    • @sprayaholic
      @sprayaholic  3 роки тому

      @@MrLeshop holder under 11quid, seal 5.40. And tips 11.50?
      Im on paintspraytools

  • @davidwalsh5547
    @davidwalsh5547 3 роки тому

    Thanks, useful video. Could I add a longer hose, say a 15meter?

    • @sprayaholic
      @sprayaholic  3 роки тому +1

      Yes you could add a 1/4 15m hose no problem. you could get an aftermarket on amazon or go genuine.

  • @arronrichards6908
    @arronrichards6908 3 роки тому

    Good video, is there much difference between this and the new model Q190? Keep up the great content mate

    • @sprayaholic
      @sprayaholic  3 роки тому

      The Q tech p190 is a newer version, ill be doing a comparison shortly between them both and a run down on the newer model too. I think the new model has different internals but will have a look weight and specs remain the same

  • @hughespaintingdecorating3348
    @hughespaintingdecorating3348 3 роки тому

    Great vid, what’s your thoughts on the gx21?

    • @sprayaholic
      @sprayaholic  3 роки тому +1

      Thanks for watching. Yes lovely machines. Ive got the gxff which is the same pump just comes with shorter thinner hose and hopper. Quick change pumps and just over 100quid for a new one