Honda CB650R Replacing Stock Exhaust with Akropovic Racing S-H6R11-AFT Install

Поділитися
Вставка
  • Опубліковано 5 вер 2024
  • Removing stock exhaust from #Honda #CB650R and replacing with a full system #Akropovic Racing #S-H6R11-AFT exhaust. Installation method and exhaust sounds.

КОМЕНТАРІ • 29

  • @BananaMobileGaming
    @BananaMobileGaming 2 роки тому +4

    I'm literally about to buy this for my 2021 Cb650r. I hope everything goes smooth when I install it 😂

    • @TheF1mo
      @TheF1mo  2 роки тому

      Rather simple to do with the tools outlined in the video. Just installing the header pipes is the challenging part. Fiddly that’s all.

    • @neoretroguy4488
      @neoretroguy4488 2 роки тому

      bro payo ko pa install mo nalang sa honda dealership kung san nakuha mo yung CB hehe

  • @haze4828
    @haze4828 5 місяців тому

    You can remove that tack-weld with just your arm strength if you have a good quality hex tool - Also it's super easy to remove the baffle if you spray some WD40 in around there and leave it for 5 mins, then use that spring puller to latch on to the lip. Came out super easy for me!

    • @TheF1mo
      @TheF1mo  5 місяців тому

      Trust me it's not. I would not have gone through all that trouble if were as easy. Tried the hex wrench, I am not short on tools. it's risking completely damaging the head with a hex wrench or grind the weld. as the welding is not a machine process, some may be a simple tack, others such as this one had the weld over the baffle.

    • @haze4828
      @haze4828 5 місяців тому

      @@TheF1mo Guess I just got lucky with my particular exhaust then?

  • @paul-ku
    @paul-ku 4 місяці тому +2

    great detailed vid

    • @TheF1mo
      @TheF1mo  4 місяці тому

      Appreciate it. Thank you.

  • @shadowboybass
    @shadowboybass 2 роки тому

    what is the Nm for the nuts at the exaust ?

  • @adamsedlar9908
    @adamsedlar9908 2 роки тому

    Hey, just wanted to ask what year is that? Is it the euro 4 or 5?

  • @eddiewu2336
    @eddiewu2336 2 роки тому

    what are the three tubes hanging off the bike near the kickstand and below the shifter at 1:25?

    • @TheF1mo
      @TheF1mo  2 роки тому

      Overflow and expansion

    • @eddiewu2336
      @eddiewu2336 2 роки тому

      @@TheF1mo Were they always like that to begin with or were they disconnected from somewhere during the process of installing the exhaust?

    • @TheF1mo
      @TheF1mo  2 роки тому +1

      Yes this is the position of the pipes as standard.

  • @Chyurri
    @Chyurri 3 роки тому

    what is your camera and mic setup?

  • @tronnald4591
    @tronnald4591 3 роки тому

    Hi! Tell me please - need to configure the engine? Or just install the exhaust system and enjoy it? Thanks!

    • @TheF1mo
      @TheF1mo  3 роки тому

      No need for remapping

    • @tronnald4591
      @tronnald4591 3 роки тому +1

      @@TheF1mo Thanks for the answer! Is the engine as stable as the stock exhaust system in all rev ranges?

    • @TheF1mo
      @TheF1mo  3 роки тому

      Yep. It’s smooth no random Rev jumps or idle. Power is very little increase. Sounds obviously louder but not excessive. It’s a good upgrade to get.

    • @tronnald4591
      @tronnald4591 3 роки тому

      @@TheF1mo Thank you so much bro!

    • @tronnald4591
      @tronnald4591 3 роки тому

      @@TheF1mo ua-cam.com/video/XxKLnxRwyoc/v-deo.html Hi bro! Exhaust installed :) Thanks for the tip!

  • @user-fi4id6hv7j
    @user-fi4id6hv7j 4 роки тому

    With db killer is street legal? It has catalytic or not ?

    • @mohammedislam8992
      @mohammedislam8992 3 роки тому

      With DB killer will be street legal. No CAT inside. I rode without DB killer it’s fine.

  • @MissMan666
    @MissMan666 2 роки тому

    No ECU tune ?