HP 100 103 107 108 Samsung M2070 Fuser Unit Disassembly/Reassembly

Taking apart Fuser Assembly HP Laser 100 103a 107a 107w 108, Samsung Laser Printers SL-M2022 M2020 M2026 M2070 M2071 ML-2160 SCX-3400 Xpress M2070FW M2020W SF-760P SCX-3405FW 3401 3406F SCX-3407 ML-2161 ML-2165 ML-2166 ML-2167 ML-2160 SCX-4300 JC91-01076A
How to remove lower fuser roller, upper fuser roller, gears, thermistor, thermal fuse, heating lamp, gears.
For any question or suggestion leave a comment.
- Activate the CC Subtitles in your language -
-----------------------------------------------------------------
email: [e-mail]
other links:
www.emmegiricam...
store.hp.com/us...
-----------------------------------------------------------------

[@ojokstephen5826]

thanks you for your technique

[@VicMan_MTB]

Muchas gracias!!! 👍

[@sathyaj]

Thank you somuch🙏

[@detodosanjuan1097]

Thank you so much. If I am going to change the fuser roller, should I put thermal grease?

[@viandant5]

It would be better. It not, leave the old grease

[@detodosanjuan1097]

@@viandant5 Thank you so much

[@brorauntzz2483]

bro did you miss on the last part, a screw on the wheel side? if so then i have 1 screw over, should i screw it in from above or below

[@viandant5]

no I think the video is correct, there are no other screws on that side

[@user-sn1ez8xy3e]

Hello, good afternoon, Mr. Viandats5.
I did the procedure explained in the video but now my HP 107 printer has an error (U1-2320), it does not print and remains in an error state. Can you think of any reason? connect everything correctly but it does not leave that state.
Your advice would be helpful, thank you very much.

[@viandant5]

That error code indicates that the fuser temperature is abnormal, probably you have to disassembly and reassembly the fuser unit again. Or the power supply is bad.

[@atthebat]

Hello, is it possible to replace the plastic exit roller without removing the fuser unit from the machine? Ours has been broken and a replacement piece ordered. Thank you.

[@viandant5]

The rod with the exit rollers? It has a gear on the side, It's not possible

[@atthebat]

@@viandant5 Thank you.

[@sathyaj]

If possible, can you explain how to disassamble the fuser unit in Samsung ML1866 Laser printer?. Thank you

[@viandant5]

I have not that machine in office. When I'll have one of them I'll make a video

[@sathyaj]

Okay no problem 🙂. It's not emergency. I hearty thank you for your valuable reply. 🙏💐

[@tonyfernandes6976]

Is this fuser lamp same for brother lazer printer.

[@viandant5]

No it's different

[@tereraishumba1957]

The fuser unit is too hot how can I fix the problem?

[@viandant5]

May be the thermistor. try to clean it

[@arektrowulan6705]

Same with Samsung?

[@viandant5]

Yes it's the same machine