KOBELCO SERVICE DIAGNOSTIC MENU | Freeze and Live Data Steams | Engine, pump, travel motors, ect.
Вставка
- Опубліковано 22 сер 2024
- KOBELCO SERVICE DIAGNOSTIC HIDDEN MENU | Engine, hydraulic pump, final drives, valves, solenoids ect. Everything you need to know how to enter Instrument Cluster Diagnostics Service Menu on Kobelco Hydraulic Excavator to check machine Counters, Freeze and Live Data: Engine performance, Hydraulic Pumps, Travel Motors, Proportional Valves, Solenoids, Cylinders, Actuators ect.
Enjoy!
#KOBELCO #Excavator #PistonShack
KOBELCO SERVICE REMINDER MESSAGE RESET | Engine Oil, Fuel Filter, Hydraulic Filter Reset.
• KOBELCO SERVICE REMIND...
FINAL DRIVE GEAR OIL CHANGE: check, level, orientation, drain, change, intervals
• FINAL DRIVE GEAR OIL C...
HEAVY EQUIPMENT BAY Playlist:
• HEAVY EQUIPMENT BAY
PistonShack's Top Diagnostic Tools:
1. BlueDriver Bluetooth Pro OBDII Scan Tool amzn.to/2X9hnFX
2. LAUNCH X431 V+ 4.0 Bi-Directional Full System Diagnostic Tool amzn.to/3jzJaHc
3. Automotive Digital Oscilloscope Hantek 1008C amzn.to/3jzJaHc
4. INNOVA 3410 Test Light/Circuit Tester amzn.to/3AoFT4i
5. Fuse Socket Connector Kit amzn.to/3yyB9Zj
6. Fuse Socket Connector Kit amzn.to/3yyB9Zj
7. Fuse Socket Connector Kit, 1 Pack amzn.to/3yyB9Zj
8. POWER PROBE III Clamshell amzn.to/3seWPqZ
9. Lisle 56810 Relay Test Jumper KIT amzn.to/3xLXCRx
10. Lisle 69300 Master Relay Test Jump Set amzn.to/3yNeubQ
MY TOOLS & FILMING GEAR I USE and RECOMMEND (affiliated links):
kit.co/pistons...
DISCLAIMER:
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results.
Due to factors beyond the control of PISTONSHACK, it cannot guarantee against unauthorized modifications of this information or improper use of this information. PISTONSHACK assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. PISTONSHACK recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of PISTONSHACK, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not PISTONSHACK.
For More Heavy Equipment Vids. Check Heavy Equipment Bay Playlist:
ua-cam.com/play/PL5McWx893MSTlV1756Ux6ZKVWpTrDTF8n.html
KOBELCO SERVICE REMINDER MESSAGE RESET | Engine Oil, Fuel Filter, Hydraulic Filter Reset.
ua-cam.com/video/EhNK72ngwnA/v-deo.html
wow.....a very complicated machine.
Yes, it is. I have 1650+ pages factory service repair manual to make everything little bit easy.
Hello, how do you change de hour interval for the oil change? Please help
Hi, what about code 37198 on a kobelco blade runner 2016 how to fix that every 200 hours and go to limp mode due to a dpf issue thank you sir
Will it explain a Service code / trouble shoot
How do you turn off heated seat?
Hello, What can you tell about error code 10058? What is it?
Did you ever find out anything about the 10058 code? I have that same code on a 2013 SK210-9
Can you give me any information on a code 10058??
Hi Calvin. Usually Kobelco Error DTC's codes have one latter and three digits following when displayed on the gauge cluster (likeD013 or E023 ect.) Check machine mamory for any stored or pending codes again because I it's not Kobelko code.
The Kobelco I have is a 2013 SK210. When I go into the diagnostic menu at the top of the page it says Main Cont P/N YN22E00455F2, Version 2.0. I removed the panel behind the seat and the controller had been replaced in 2018 with P/N YN22E00425F1. Do you think someone installed the wrong controller in this Kobelco??
I also cleared all stored fault codes and as soon as I turned the key off it threw the 10058 fault code before the dash turned off.