How to open any lock without the key
Вставка
- Опубліковано 4 жов 2024
- How to get into any pin-tumbler lock by bypassing the shearline, no picking, drilling, prying, bumping or crying. This does not work on dimple locks, kwikset smart key, medeco locks or vehicles.
- Комедії
I am a locksmith and I like looking at comedy acts like this!
Hello Brian .you said you are a locksmith. I noticed my neighbor can get to my flat easily and I changed the lock several times but still, it happens. How this could be possible? what else can I do?
@Brian Clancy Same! Though I do feel like a tennis ball would have been faster 😂
@@mhgace3686 Do you have a deadbot or only a handle/knobset? If you don't have a deadbolt, the spring latch could be being slipped. Could also be that your neighbour is picking or bumping your locks.
@@Ghost_Os it is a deadbolt. But some how he can open and close the flat door without any problem! I don't know what to do? and how to prevent this? Please any idea
@@mhgace3686 A few possibilities immediately come to mind;
1. He's bumping (a good locksmith will know how to modify the lock and key to prevent it). Bumping often (but not always) leaves tell-tale marks on the face of the lock, at the area of the keyway.
2. He's just picking it. You could get someone out to rekey it, and tell them you want security pins and a pinning that's difficult to pick. Unfortunately, these steps only make a lock more difficult, not impossible.
3. He may be using a Lishi or similar decoding tool. This would allow him to actually make (or have made) a working key. The security pins mentioned in scenario 2 would make his first time work a little harder, but that's it.
4. Probably unlikely, but he could be hand-impressioning a key.
5. Measure the length of your deadbolt when it's fully extended. Then, measure the depth of the hole it goes into. Make sure the hole is at least deep enough to accomodate the full length of the deadbolt. If it's not, make it so. If a deadbolt is unable to fully extend, it can be worked back into the door with an icepick or similar tool. You can check your deadbolt for any odd scratches or gouges.
Two things I would suggest (I'm presuming you're certain that he's entering via that door);
1. Invest in some manner of camera system (one that would allow you to see what he's doing would obviously be ideal).
2. Check out Bowley locks. They're a little pricey, and the key takes a little getting used to (and can't be copied at a hardware store - each key is registered with the company and a duplicate can pretty much only be had from Bowley), but they're very good locks. I'm not prepared to say that they can't be picked, but would require specialized tools (which I don't think exist) and I'm not aware of anyone having picked one yet. Lishi and similar decoders will not work. Bumping won't work. Impressioning is theoretically possible, but would require specialized knowledge, tools, and materials. Very very unlikely. All this means: make sure you don't lose your key or lock yourself out.
I'm curious how you know it's the neighbour doing it, and why you haven't contacted the authorities. Do you absolutely know, or strongly suspect?
In any event, your best bet for putting a stop to it is probably a Bowley deadbolt. Google for "Bowley Lock Company".
I call shenanigans!
Thats only Step 1 to impression a lock lol
you guessed it! great channel btw. your video about how some sentry safes solenoids can be pushed with a magnet prompted me to invest in a rare earth magnet for the lock company I work for and I have used it on the field twice thus far. so thanks!
Wow, I can't believe how well this trick just worked for me!! Opens perfectly!! If real burglars ever start doing this then we will all be in trouble!! It even worked on my old Medicos and Master locks!!
Wink,Wink. You boys get what I'm aiming at here, right?
Good job... I think they were both mastered keyed to blanks...
the other key still works....
Unfortunately this is impossible, you would have raised too many pins past the sheer line binding the cylinder. I am assuming you have taken this lock apart and removed all the pins but the last one to create this video
I am a locksmith and this guy is full of something that smells! He removes all the pins in the cylinder first!
Same here this guy is full of something that smells like
Your crazy bro,He lied so good that he even beleived his ownself ..🤣🤣🤣🤣🤣🤣💀💀💀💀💀
Thanks for the tip I tried it today and it worked really quick and easy 👍 people leaving negative comments must have not figured out how to do it correctly I think they're filing the key wrong..🤔
They're missing the crucial step of removing the pins. Or mastering to a blank ahead of time.
Wow thanks man! Wait till I tell LPL about this!!
HAHAHAHAHAHAHAHAHA!!!!!!! I might've been born at night... But not last night!
The Schlage 0 cut is 165 thousands of an inch from the sheer line.,.,So NO, mechanically and possible neither one Sclage or Kwikset can work with “O” cuts..
Good lord. He must have bought those locks from a Hollywood prop shop. It's unfortunate how many people are going to believe this nonsense. Like the "open car door with tennis ball" video. Gulli-Bull!
Anyone that believes that must have a sucker on their for head
Why would you create a video that is completely false ??? I would love to seen him remove the core and seen the single top and bottom pin.
I'm an apartment Maintenance, and sometimes we misplaced keys where we can't find original keys, gonna try this on Wednesday, when I go back to work 5 n, 6 pin keys
How amusing. *eye roll*
Oh okay internet. That would totally work.
Ha, gave me a good laugh. Next time how about leaving the pins in the lock and learn how to actually pick it open. Good presentation though i hope you can fool some people to try ;)
You will find the video is a little discontinued in between shake then turn, thanks the editor give us fun time.
I have discovered an even easier, faster way to open locks. ALL locks, including padlocks, auto locks, dead bolts, commercial, etc etc. ALL locks. It was a complete accidental discovery. Soon, I will be filthy rich!!!!!
literally locked out thanks for wasting my time
Agreed there is no possible way this method works. It's not possible to walk the pins up over the sheer line! The spring will push them down every time you take tension off the cylinder. Nice try though almost made me get out of bed to try it before logic kicked in.
STFD! Wow
Worst 3 minutes and 15 Seconds ever spent
Thanks! Now robbers can break in my house! 👍🏻
@The Star UA-camr And Gamer(TSYAG) Ikr?!
Ok I'm here at work , and DEFINITELY does NOT work for commercial apartments building , I filed the key goes in but that's all it does
Is that a magic file.
Wow. How do you sleep?
Now how do I lock my door without the key
How to open lock without a key. Step 1 : Get a Key 🤦♂️
no way
Its a scam video. Its impossible fir an uncut key to raise any pun up to the shear line. He just had it keyed to all #1 pins nd maybe masterkeyed to another key so both keys would open it.
Why take the time to file a key a good set of picks is like 20 dollars and fits in my wallet picking a lock takes 5 minutes tops and if your not robbing anyone who cares how loud you are. Hell when I was in Boy Scouts we learned how to pick locks with 2 paper clips generally just as easy but sometimes a bitch to work with
Shit don't post till your done watching lock either has 1 open pin or none at all stick to your picks boys and girld
Shit don't post till your done watching lock either has 1 open pin or none at all stick to your picks boys and girls
Why do people do BS videos like this to lie to people?
Because there are people in Florida that will believe anything on social media
Like we have blank keys lying around 🙄. Thanks for nothing
does not work at all. he took the pins out. I knew this would not work.
If this actually worked (and it doesn't), then when he twisted it all the way left and right, the pins would have reset themselves. This is just some guy trying to make clueless people waste their time.
Hey Dude, a banana a works better! Just smash it into the keyway and it will automatically unlock the lock. This does not work on dimple locks, kwikset smart key, medeco locks or vehicles. Oh wait, maybe its an apple.
Whole lotta yappage
So full of it! SC1 keyblank sales will double in the private sector. I sure hate it for them.
Bull S#!t As a professional locksmith I know better. Try again!
This dude think lie is one of the goodness to share.. dont be too judgie. Lol
Was funny though
Yeahhhh that’s not at all how that works.
You totally took out the pins.
Also that’s not a Kwikset lock.
- Jake, a professional locksmith from Texas.
Yeah, master keyed to a 0-bitted key, I didn't remove pins. Kwikset is used loosely for anything using a KW keyway. I made this 4 years ago because a co-worker and I thought it would be fun to troll some people.
-Dave, a professional locksmith from California.
Liar! Liar! Fraud
Nice way to get many UA-cam hits. But completely false it can’t be done with all lower and upper pins.
You shouldn't teach people to do this
Fake nonsense.
Completely bogus does NOT work....don't waste your time
Calling BS. You took the pins out. Why do this? Are you trying to score with lockpicker groupies????
I master pinned the lever to a zero bitted key and master pinned the titan to a 1 bitted key.
you can literally hear the pins dropping as he pulls the blank out. my question to you Dave is did you try to pick it?
Lier 🤣🤣
FAKE