Installation | GlowShift Fuel Pressure Gauge In 2001-2006 6.6 Duramax LB7, LLY & LBZ
Вставка
- Опубліковано 15 вер 2024
- Learn how to install a GlowShift 7 Color Series Fuel Pressure Gauge into a 2001-2006 6.6L Duramax LB7, LLY or LBZ diesel pickup.
Get A Fuel Pressure Gauge Here: www.glowshiftd...
FUEL PRESSURE GAUGE KITS
GlowShift 7 Color Series Fuel Pressure Gauges will help you make sure your vehicle’s fuel pressure is running at optimal levels. Each truck and car fuel pressure gauge keeps you alerted if the pressure level is too low or too high, which could result in engine damage plus a loss of overall horsepower. The included 1/8-27 NPT Electronic Fuel Pressure Sensor has a small, compact design and can be installed directly to the fuel system for accurate readouts. Also included is a 9’ Pressure Sensor Harness, 2’ Power Harness, Mounting Hardware and more for installation.
IMPORTANT: An aftermarket lift pump assembly must be installed on a 2001-2006 Duramax LB7, LLY or LBZ truck before starting the installation of a fuel pressure gauge.
7 COLOR GAUGE SERIES
7 Color Series Gauges come standard with a cutting-edge design that will enhance your vehicle’s interior. Depending on which version you select, you’ll have the choice of a black or white gauge dial with a magnified clear or tinted lens and illuminated red needle. Easily cycle through the 7 Solid Color Modes and 2 Color Cycles available for the analog LED display. Solid Colors include Blue, Green, Red, Teal, Yellow, Purple and White.
AUTOMOTIVE FUEL PRESSURE GAUGE INSTALL ACCESSORIES
Fuel Pressure Adapters: www.glowshiftd...
Expandable Circuit: bit.ly/2wJIXsl
View our entire product lineup at www.glowshiftd...
CONNECT ON SOCIAL:
Facebook - / glowshift
Instagram - / glowshift
Twitter - / glowshift
#GlowShift
Category Autos & Vehicles
WARNING: This demonstration is meant to be a guideline. All vehicles are different and professional assistance is highly recommended for installing any gauge. As with all of our products, we recommend testing the gauge before beginning the install process.
Would this process be the same on a Cummins with an aftermarket lift pump?
Yes, depending on the lift pump.
I bought the 3 pod / pillar package that came with this gauge for my 2002 lb7 GMC Sierra. The fuel pressure gauge is for the lift pump. I’m looking for a gauge to read fuel rail pressure. Fuel rail pressure is anywhere from like 10,000-20,000. Do you guys make a gauge and like a pig tail adaptor for this ?
Rail Pressure Gauges: www.glowshiftdirect.com/fuel-rail-pressure-gauges/
Rail pressure harness: www.glowshiftdirect.com/fuel-rail-pressure-gauge-wiring-harness/
What are the specs on the fuel sender where you plug the wiring in to read at the fuel port? Ive bought 2 that do no work now
Which specs are you looking for?
GlowShift Gauges i cannot find the right fuel pressure sensor to buy. I have tried 2 different ones neither worked
If you purchased a GlowShift gauge it will come with the correct sensor. No additional sensors will be needed.
GlowShift Gauges i bought the truck without a lift pump so the fuel pressure gauge hadnt been hooked up yet. Then i added one but the previous owner didnt give me the sensor to install it
This is the sensor you will need: www.glowshiftdirect.com/replacement-100-psi-fuel-pressure-oil-pressure-exhaust-pressure-sensor/