mk2 here. uk spec. from new lost second stage after 3 hours heavy use. mk2 has your delrin fix on the rods but they used aluminium. I found adjusting very easy with mk2. no where near the adjustments of 1st stage travel and sear pressure. especially working between them to find the sweet spot. great gun. thanks for the video.
As always, a great video and very informative, thanks so much for all you do. Will see if I can get you to do some work on my Impact later on this year. Stay Chilly!
I learn something new every time I watch your videos. I have the Maverick Sniper and the trigger pull is a little heavy for me (2.5#). I like the first stage travel, how can I just lighten the pull to ~8 oz? Thanks for everything on your channel.
hello again.. i read on a forum you uploaded to that you machined the linkage and the lever sleeve from this video.. my question is if you are capability to mill a lefthand cheek piece for the wildcat and if you would be willing to make one.. with compensation or a fee of course..?
Hi Esting, I have got my FX Streamline a few days ago. My safety lever doesnt go into safe mode. After removing the stock and only adjusting the screw linked to the safety lever (the last screw at an angle) my safety lever is still so stiff that I had to disengage it with abit of pressure . However, it still remains very stiff. So with the stock on, its impossible to put it on safe or vice versa... Any advice/recommendations? Thank you
mk2 here. uk spec. from new lost second stage after 3 hours heavy use. mk2 has your delrin fix on the rods but they used aluminium.
I found adjusting very easy with mk2. no where near the adjustments of 1st stage travel and sear pressure. especially working between them to find the sweet spot.
great gun. thanks for the video.
As always, a great video and very informative, thanks so much for all you do. Will see if I can get you to do some work on my Impact later on this year. Stay Chilly!
First class upload ~ very helpful, thank you 👏
Brilliant video Sir
I learn something new every time I watch your videos. I have the Maverick Sniper and the trigger pull is a little heavy for me (2.5#). I like the first stage travel, how can I just lighten the pull to ~8 oz? Thanks for everything on your channel.
It is possible to adjust the trigger rod length without unhooking either link clip.
hello again.. i read on a forum you uploaded to that you machined the linkage and the lever sleeve from this video.. my question is if you are capability to mill a lefthand cheek piece for the wildcat and if you would be willing to make one.. with compensation or a fee of course..?
Have you made a drawing of the block?
Hi Esting, I have got my FX Streamline a few days ago. My safety lever doesnt go into safe mode. After removing the stock and only adjusting the screw linked to the safety lever (the last screw at an angle) my safety lever is still so stiff that I had to disengage it with abit of pressure . However, it still remains very stiff. So with the stock on, its impossible to put it on safe or vice versa... Any advice/recommendations? Thank you
the "L" shape sear pull part is broken . could you please show us how to replace it?
is that an aftermarket lever handle sleeve.? very good videos by the way.!!
I made the cocking lever handle sleeve
Esting Rowe.. nice..
@@ernestrowe5061 was about to ask as well..any chance of a vid showing how u did it?..nice vid..