Thank you! FIAT dealership wanted $460 to replace the entire thing after one cable broke and they have a 'replace not repair' business mode, refusing to even look at a repair kitl. Less than $20 and 10 minutes of UA-cam (watching parts of this video multiple times), I fixed it myself!
I was watching for the window clip piece removal and replacement, but I was very glad for the cable part as well. All the other videos only explained how to replace the whole mechanism, which is way easier than taking apart the actual mechanism, but thank you so much. Now I see why they just replace the whole thing instead of just one piece 😅
My man, this video has been so useful to me I cried. I didn't have any tools besides a hex key set, a screwdriver, and a credit card and I managed to get the entire door off, pull out the window regulator, repair the snapped strings and broken clip, and put it together correctly. My window is FIXED! Thank you so much for your video.
The new cables I had were too tight to do by hand. After many hours of trying, I used a thin bar to do the twist my hands could not, a screw driver would suffice as the bar. Also I think the video is for a left hand door and it's a different approach for right hand door, can only say is trial and error. Good video though, skilled gentleman makes it look easy! Thank you.
I want to thank you so very very much !after many days of trail and error I found your video. It’s the only video available that describes the cable procedure ✌️ Again thanks
Great video, by the time you have replaced a few of them clip's (they break real easy) over time, you will not take out the window regulator but use zip ties thrugh the hole at the bottom of the window that the clip go's into and fasten the window to the broken white plastic runner that the clip broke off of.
Great vid helped my husband no end. The twisting of the pulley is the gem in the vid, anyone reading this twisting the pulley aint as easy as it looks, be warned 😂😂😂
Thanks so much it’s a great explanation of how to do the cables because for sure I would never have known to twist that wheel so thanks again you saved my daughter an expensive garage bill
So helpful, I'm not going to lie it took a couple of attempts to get the "Twist" correct and get those cables sitting in the right position but hey we got there 😀 👍
Do you have a solution for the rotating plastic wheel on the end of the regulator? On mine that what it is damaged and need replacing but on kits i didnt see a replacement…
many thanks .. the challenge i'm facing after this is that the window guide clip 'pin' came out. the original clip is still in the door , but the pin holding it with the glass is gone . seemed difficult to remove the old one. any tips on how to fix that?
@@kwamezulushabazz hey, Thanks for the reply. I do agree I need to take the old one out first. But it fits nice and tight and I can’t just pull it out . Trying to find a way to disassemble the door but no luck yet.
@@kwamezulushabazz the regulator clip had been fixed. It’s the guide clip that’s attached to the glass that fell apart and need to be replaced. That’s where I’m stucked now.
Our serviceman spent 3hrs. trying to make it, I made it within 3 minutes, just because of your video. Thank you so much, really appreciate
Thank you! FIAT dealership wanted $460 to replace the entire thing after one cable broke and they have a 'replace not repair' business mode, refusing to even look at a repair kitl. Less than $20 and 10 minutes of UA-cam (watching parts of this video multiple times), I fixed it myself!
I was watching for the window clip piece removal and replacement, but I was very glad for the cable part as well. All the other videos only explained how to replace the whole mechanism, which is way easier than taking apart the actual mechanism, but thank you so much. Now I see why they just replace the whole thing instead of just one piece 😅
My man, this video has been so useful to me I cried. I didn't have any tools besides a hex key set, a screwdriver, and a credit card and I managed to get the entire door off, pull out the window regulator, repair the snapped strings and broken clip, and put it together correctly. My window is FIXED! Thank you so much for your video.
The new cables I had were too tight to do by hand. After many hours of trying, I used a thin bar to do the twist my hands could not, a screw driver would suffice as the bar. Also I think the video is for a left hand door and it's a different approach for right hand door, can only say is trial and error. Good video though, skilled gentleman makes it look easy! Thank you.
I want to thank you so very very much !after many days of trail and error I found your video. It’s the only video available that describes the cable procedure ✌️ Again thanks
Thank you so much. Your video was perfect. I didn't know about the twist part and when I saw that it finally made sense.
Great video, by the time you have replaced a few of them clip's (they break real easy) over time, you will not take out the window regulator but use zip ties thrugh the hole at the bottom of the window that the clip go's into and fasten the window to the broken white plastic runner that the clip broke off of.
I wonder what we did before zip ties? Baling wire 🙃
I'm going to try that if that dang plastic clip snaps off again.
Great vid helped my husband no end. The twisting of the pulley is the gem in the vid, anyone reading this twisting the pulley aint as easy as it looks, be warned 😂😂😂
Thank you so much, you definately helped me fix my window, I couldn't work out how to do it but your twist help me get the job done :)
Thanks so much it’s a great explanation of how to do the cables because for sure I would never have known to twist that wheel so thanks again you saved my daughter an expensive garage bill
Getting that cable on seemed impossible before your video. Thank you so much!!!
Video was really helpful - the explanation of the cable set up was critical, thank you!
Thank you so much for your video. When I was doing my cable work I did it the opposite way and got it! My first fiat repair made easy.
Your instructions were perfect, thank you, you helped me a lot.
THANKS FOR THE VIDEO!!!!!! I have to replace the plastic piece on top of the regulator and no money to hire someone else to do it.
So helpful, I'm not going to lie it took a couple of attempts to get the "Twist" correct and get those cables sitting in the right position but hey we got there 😀 👍
Thank you, my friend. You helped me very much! I wish you all the best for your afford to make this video tutorial!
Thank you my friend, at last some one that knows what they are doing. Brilliant👍👍!
Thank you very much for taking the time to do this video.
You get my big thumbs up for this. Thank you for saying the Tork size!
You saved my ass with this video! Thank you!!!
Darn good video and explanation of this process.
Good job!
Mucho gracias, the twist helped 🎉🥂
Thank you very much , the same for grande punto , but the cable is on top , the opposite operation .
Gracias, abrazo Patagonico!!
Very good help. Thank you.
Un saludo desde Portugal.
Bro you’re saving me thousands
Very useful! Thank you! It also suits grande punto!
I very hapy thank very much you video in the best for insttalled cable on the polea thank again
Eres muy bueno explicando , gracias 💪💪💪
Awesome! Me lo gusto mucho y es el mejor video para reparar mi viento. Gracias.
Man thank you for this video
Dankeschön,Alles wunderbar.❤❤❤❤❤❤❤❤
This was helpful, thanks.
Hombre, muchas gracias !
ты лучший!!!👍
He is a smart guy.. he makes me laugh every time he says "Like this"....
Awesome. Thank you!
Thank you so much.
Do you have a solution for the rotating plastic wheel on the end of the regulator? On mine that what it is damaged and need replacing but on kits i didnt see a replacement…
thank you very much
Has anyone had issues twisting the cables I’ve just tried for an hour and cannot twist them!
Dude same I can't get the twist
@@angelrichardson1788 I had to get my partner to do it! It takes a lot of wrist strength lol
nice video, thanks
Best video
When are you getting more in stock?
Always have just trying to be better with our custumer service
Gracias
Great !!
thank you,
many thanks ..
the challenge i'm facing after this is that the window guide clip 'pin' came out. the original clip is still in the door , but the pin holding it with the glass is gone . seemed difficult to remove the old one. any tips on how to fix that?
sounds like you need to remove the clip. get new clip on the assembly and install.
@@kwamezulushabazz hey,
Thanks for the reply. I do agree I need to take the old one out first. But it fits nice and tight and I can’t just pull it out . Trying to find a way to disassemble the door but no luck yet.
@@tree-style so the clip is detached from the regulator and stuck on the window inside the door? Or am I misunderstanding you.
@@kwamezulushabazz the regulator clip had been fixed. It’s the guide clip that’s attached to the glass that fell apart and need to be replaced. That’s where I’m stucked now.
@@tree-style do you mean this part? drive.google.com/file/d/1Uy30Y6UC8pEzBT9rSse3wgMeEpggS98n/view?usp=drivesdk
Is this video for a left or right door window regulator?
This video is for the left side. And is the same for the righ you just need the right kit pieces
I cant get the twist I don't understand how to twist it.
How much is the regulator at a local parts store ?
I think arent in stock right now but if you can get it maybe over 150. If you need somethig writte me pwsceo@gmail.com
Thank. U please tell name of kit
www.powerwindowparts.net/store/p1806/Part%23K115_Fiat_500_2012-2019_Right.html of choose left side
@@powerwindowssolutionstucso8024 thanks
5.33 he said Mini Cooper ?
"For the mini Cooper"? The description says Fiat 500!
He said mini Cooper at the end but the video is labeled fiat 500. Did he just misspeak?
Yes, he meant fiat
Seems easy but it is not...
Crap...cannot see what you are doing