Let me just say from the outset that I am a Senior Systems Engineer for Power Beaming and Radar Applications. After watching your video, why should I ever bother to design my own power circuits ever again? Just give you guys a call, you not only steer me away from the rattle snake, but also give me sound advice for extremely good efficiency in Power Beaming and Radar Applications. Cannot ask for more than that, I am duly impressed!
Is this filtered power or including all harmonics? What about linearity? What about the bias readjusting when changing from 1k2 to 1k8? There are lots of what about!
Please i need your opinion MRFX1k80 with 54v The power final result less of 1k. For sure Can you tell me wath is possible to hapen with this voltage ?? If the power is close or less to 1 kw with 10w input with one attenuator 10Db
ahahaha I love you guys: 3:07 "now that's ease of use" ... video showing an obviously pre-frozen 20 kg chunk of copper. Anyway, love your products. Keep rocking.
@Alexander Kalish Dear Alexander, in the application note you can find the circuit layout, but I want the schematic because I'd like to simulate the circuit.
Please contact RFIndustrial@nxp.com for more details on purchasing. Note that our NXP authorized distributors offer the full board, but not the stand-alone PCBs.
hola saludos desde argentina quiero presupuesto de trasmisor de fm mi emisora es 97.7 fm playback fm tengo 72 metros de torre y antenas suma de 8 bipolos cable de 7-8 octavos 60 metros tengo 2.5 kw d3e potencia y quiero ser la emisara con mayor alcanse en buenos aires mandenprosupuesto y un video para conocer lo que me ppuden hacer en castellano gracias
We apologize for the delay. The Delrin mounting clamp for the NI-1230 is intended for lab evaluation purposes only. NXP is putting a process in place that will make it available for evaluation and prototyping. In the meantime, please contact us at RFIndustrial@nxp.com.
Let me just say from the outset that I am a Senior Systems Engineer for Power Beaming and Radar Applications. After watching your video, why should I ever bother to design my own power circuits ever again? Just give you guys a call, you not only steer me away from the rattle snake, but also give me sound advice for extremely good efficiency in Power Beaming and Radar Applications. Cannot ask for more than that, I am duly impressed!
Is this filtered power or including all harmonics? What about linearity? What about the bias readjusting when changing from 1k2 to 1k8? There are lots of what about!
What’s the drive power please??
Hello everyone, does anyone have a circuit of this amplifier for 1.8-54 MHz?
Do the ferrite beads (that are used in the output transformer) get hot?
Where can I get the hold-down clamps shown?
EXACTLY!
Does it also go down to 160M? Where can i get the board and is there a guide for tuning to 160M etc?
Please i need your opinion
MRFX1k80 with 54v
The power final result less of 1k. For sure
Can you tell me wath is possible to hapen with this voltage ??
If the power is close or less to 1 kw with 10w input with one attenuator 10Db
Where do you buy the Delrin mounting clamp?
ahahaha I love you guys: 3:07 "now that's ease of use" ... video showing an obviously pre-frozen 20 kg chunk of copper. Anyway, love your products. Keep rocking.
It'll be great when they develop a 150 volt power MOS. No power supply, just isolate the AC from the RF.
230Volt too, for Europe.
You mean if I drove to Arizona with a decently-tuned mobile CB antenna I might actually get a signal? :)
Hmmm 10 meter AM perhaps?
Why does anyone solder these when you can clamp down?
Hello, I'm a student and I'm studying HF amplifiers, could you please send me the schematic?
@Alexander Kalish Dear Alexander, in the application note you can find the circuit layout, but I want the schematic because I'd like to simulate the circuit.
27MHz industrial heating application? I think they meant to say CB radio application lol.
Where can I purchase the PCB for FM transmission application and the mounting clamp for the transistor ?
Please contact RFIndustrial@nxp.com for more details on purchasing. Note that our NXP authorized distributors offer the full board, but not the stand-alone PCBs.
What solder iron did you guys use?
Thank you for your question. The soldering product we used is a Metcal.
hola saludos desde argentina quiero presupuesto de trasmisor de fm mi emisora es 97.7 fm playback fm tengo 72 metros de torre y antenas suma de 8 bipolos cable de 7-8 octavos
60 metros tengo 2.5 kw d3e potencia y quiero ser la emisara con mayor alcanse en buenos aires
mandenprosupuesto y un video para conocer lo que me ppuden hacer en castellano gracias
Amazing Video!!
Note the lack of a response to both questions. I called the company. They are clueless. They don’t even seem to be aware of the products they produce.
We apologize for the delay. The Delrin mounting clamp for the NI-1230 is intended for lab evaluation purposes only. NXP is putting a process in place that will make it available for evaluation and prototyping. In the meantime, please contact us at RFIndustrial@nxp.com.
@@NXPsemi Is it available now ?
2017 65V
2022 ??V
Amazing efficiency. Just not as pretty as a 4-400 glass tetrode all lit up.
Boa noite amigo, vocês me ensina mais um dia obrigados
Muito bom . transistor top