The manitou ML-5 is a NEW Wheel loader coming to the U.S. Its runs 19 mph! Has 3 speeds & is a Compact Loader Loader that won't DAMAGE turf?!? Prove it!
I'm happy to see Manitou machines here in the US! For the longest time I thought they were strictly used overseas, they seen like decent machine! Hope you have a good day! Be safe out there!
Stan, that appears to be an awesome machine. It seems that maintenance issues were considered during the development stage. Thanks for sharing this with us👍👍👍👍👍😺🤗🐺
Any equipment with a cab I've been quite a fan of. I wish I had one with compact tractor, so I decided to build my own and it's going to be ready for even night use for snow plowing due to the vast amount of lights that'll be on it lol. So far I only have the canopy to start, then I'll build around that.
Lol, I am blessed with the greatest salesman in all of North America (Manitou) in my backyard, he has sold me several machines lol... I played with one a while ago, he had the first 2 in north America... I was definitely impressed. Too small for my operation though. Would like to add that it you could also get it with the Manitou mount instead of the skid loader mount.
You should borrow it again this winter and compare it to the Kubota! I got to drive this same machine and was impressed with the engine accessibility and the 3 speed. You road your stuff allot in the winter just like I do and I think that highspeed would be worth it.
Like the idea of engine in the back while doing grapple work so no worries of puncturing the radiator of say a tractor. Or damaging the door on a skid steer.
Nice tractor, the window thing, it’s true, at work the lowboy lost one window in our Cat backhoe going to town replaced then blow out two on the way back. The handles are old bouncing down the road wind found it Shazam !
You must have to charge a pretty big price per hour for a machine with price tag like this loader has. Going to great to watch the coming videos. Thanks 😊.
I agree but only if hes not planning to tow it, twice the weight of what he was looking at in the video. Couldn’t imagine doing 20mph down the road in anything with smaller wheels/tires than a 908 cus even that is rough riding at times. I’ve never tried one of these smaller loaders with the skinny arm spacing and I’m curious how it is compared to a 908 or something similar. I feel like when using forks looking between the lift arms and center curl cylinder is a huge advantage compared to this manitou/Wacker style where you are looking to the outside of the lift arms
This is the next generation loader (due to emissions) similar to the old Gehl AL540.The difference between a Cast loader and this type is that the Cast articulates with no oscillation, which is less sketchy . The Manitou or Gehl articulates and oscillates which can flip over carrying a heavy load if there is a pot hole or high spot on one side. I would tell a novice operator "keep the load low and slow" on uneven terrain.
It goes a bit both ways. Front steer type loaders (Avant, Cast, Vermeer etc) can tip over as well because they have the rigid frame. Giant loaders made a nice video on this: ua-cam.com/video/ooWzv-zz0HA/v-deo.html& (Giant Loaders G1500 comparison to Bobcat L28)
The Homestake Mine in South Dakota had issues with center-oscillating EIMCO 921 loaders, they tended to tip on rough ground. An oscillating rear axle bolster is preferable as it doesn't affect the machine's center of gravity nearly as much.
@@Miniloaders The reality of the physics is when carrying a load the ridgid joint will be more stable. The oscillating joint would be be better for digging or pushing. Giant does have the oscillation damper option calle Stabillo to remedy inertia caused by radical terrain variations. There is a video from Giant.
Hey Stan that's a sweet machine I hope it works out 👍 you have me considering a small loader over a skid steer 🤪 love your videos just real life stuff and know bull 💩
I thought you weren’t loading it backwards on the trailer at the dealer per Harry’s suggestion then at the job site it’s on the trailer backwards. 🤷🏼♂️🤷🏼♂️
I was curious when he was making his turn does the tractor have a zero radius will it turn into its own tracks it kind of didn't look so sometimes that is a nice ability it's funny though to me that the skid steer world hasn't come up with a oscillating track system on their machines and even cooler to have a crab mode now it's nice to drive a tractor when you're high up you have more visual but I've always loved the skid steer you have a lower clearance lower center of gravity you can seem to go into more places with a skid steer but yes you tear everything up underneath it today I was using a little ditch witch ride on skid steer unfortunately I don't know the model because the stickers on it have been peeled off but that little machine made a two-day job by hand and wheelbarrow a one-day job and the funny thing is is that the bucket on the machine would probably take two and a half scoops to fill up your standard wheelbarrow of material we like to mount our wheelbarrows it saves at least 10 less trips I don't know if that was a purchase or a lease or a lender but can't wait to see it in action
Stan are you just testing I know how much you like the Kubota last snow season are you also look at purchasing another one of them as for the help situation no call no shows are just a thing as business owner we have to put up with day to day it sucks and if you say something it’s like your wrong and if you fire them just end up doing it yourself🤷♂️
@@Dirtmonkey awesome! I just went back and watched the video. They have a smaller one, that’s the R430 if you were looking for something to get into yards with. I believe there’s even a backhoe option for them
Here's an idea let's build a carbon trap in a diesel engine to hold the carbon particulates so they don't go to atmosphere, then burn it out so it all goes to atmosphere at 1000 degrees all at once.... Delete everything....
Does it have articulated rear steer like a John Deere? I’m going to say no. Deere is the only one in the industry that has that as a standard option on 3 models. Why don’t you try a Deere and go head to head??
I'm happy to see Manitou machines here in the US! For the longest time I thought they were strictly used overseas, they seen like decent machine! Hope you have a good day! Be safe out there!
You betcha 😁 I’m stoked to be sharing about em! Hope you have a good one yourself bud
I believe they are made in Yankton, South Dakota. The skid steers are made in Madison, South Dakota.
Great info Stan! We're all about saving the turf and pastures on the farm!
This is a perfect farm unit for that
Stan, that appears to be an awesome machine. It seems that maintenance issues were considered during the development stage. Thanks for sharing this with us👍👍👍👍👍😺🤗🐺
A beast! Glad to hear ya like it too
I'd like to see you do a video on avant 860i wheel loader when you get a chance thanks Stan. I love your channel.
Can’t wait to see this project! 9 buildings is a lot of work! 👍🏻😎
Heck yeah
I don't know if I could really trust a salesman wearing YELLOW CROCS!!! LOL!
I think anyone that wears yellow crocs is even more trustworthy. I wouldn’t trust him if he was wearing a suit and tie 😉😁👍
Any equipment with a cab I've been quite a fan of. I wish I had one with compact tractor, so I decided to build my own and it's going to be ready for even night use for snow plowing due to the vast amount of lights that'll be on it lol. So far I only have the canopy to start, then I'll build around that.
That’s awesome. Makes it even cooler you’re doing it yourself. Hope it works out smoothly for you 👊
Looks like it could be a great machine. I want to see more of it
You got it!
Nice one Stan. 👍👍🏴🏴
😁👍
Transverse/side-mounted engines are really the way to go. It's a more efficient use of space and allows the machine to be shorter and/or lower.
Yes sir. Overall these machines just keep getting more advanced and efficient
I am looking forward to seeing this machine working.
Lol, I am blessed with the greatest salesman in all of North America (Manitou) in my backyard, he has sold me several machines lol... I played with one a while ago, he had the first 2 in north America... I was definitely impressed. Too small for my operation though. Would like to add that it you could also get it with the Manitou mount instead of the skid loader mount.
Saw some manitous unloading sod, gotta say I'm impressed with them!.
We all liked that unit which doesn’t always happen
Worked with a Mantou on a farm but it had tge extention boom. Good machine. Had a Perkins diesel.
Sounds sweeet 👍
Awesome machine. Love to see more
Cool beans 👍
Congrats Stan! can't wait to see it in action
The guys are digging this machine so far
@@Dirtmonkey Nice it looks amazing and love the first person view you do on your videos it gives us a better appreciation!
I like, articulated steering, nice machine enjoy.
Indeed 😎
You should borrow it again this winter and compare it to the Kubota! I got to drive this same machine and was impressed with the engine accessibility and the 3 speed. You road your stuff allot in the winter just like I do and I think that highspeed would be worth it.
Like the idea of engine in the back while doing grapple work so no worries of puncturing the radiator of say a tractor. Or damaging the door on a skid steer.
fancy machine great video
Pretty cool little unit. Thanks for tuning in.
Love these videos, love watching.
NICE 👍🏻 Lookin forward to part 2 . Thanks Stan.
nice rig
Wait till Stan gets into the telecopic version
What a awesome channel
Thank you sir 🙏
@@Dirtmonkey You're welcome. My name is Young from Kingbolen. Let's check the email or Instagram message. I sent it.
Philly Appreciates You Guy's
Nice tractor, the window thing, it’s true, at work the lowboy lost one window in our Cat backhoe going to town replaced then blow out two on the way back. The handles are old bouncing down the road wind found it Shazam !
Oh crap. Those are spendy to!
Nothing but love brother from Philadelphia
You must have to charge a pretty big price per hour for a machine with price tag like this loader has. Going to great to watch the coming videos. Thanks 😊.
tax write off, if done right you dont pay any taxes.
The cost of the machine gets calculated into overhead which then goes against your job costing.
look into a cat 908. id love to see more yellow equipment!
Haha noted
I agree but only if hes not planning to tow it, twice the weight of what he was looking at in the video. Couldn’t imagine doing 20mph down the road in anything with smaller wheels/tires than a 908 cus even that is rough riding at times. I’ve never tried one of these smaller loaders with the skinny arm spacing and I’m curious how it is compared to a 908 or something similar. I feel like when using forks looking between the lift arms and center curl cylinder is a huge advantage compared to this manitou/Wacker style where you are looking to the outside of the lift arms
Would have like to see you demo the mecalac loader but thats a nice loader too 👍
I did a brief overview on it but getting them to part with it was another thing
Those yellow crocks 🤣🤣🤣 👌👌👏👏
You make amazing videos
🙏thank you sir.
That's nice!
Pretty cool machine on my book
With the restricted import of these units, I would be concerned about availability of repair parts.
I feel that. Being able to get parts easily or not really makes or breaks the worth of the equipment
@@Dirtmonkey Let's Go0o0o0o0o0o0o0o
Stan- have you seen Hummerbee machines? Made in Michigan. Cheaper, 74HP, telescoping, 4500lb tipping load. Worth checking out.
This is the next generation loader (due to emissions) similar to the old Gehl AL540.The difference between a Cast loader and this type is that the Cast articulates with no oscillation, which is less sketchy . The Manitou or Gehl articulates and oscillates which can flip over carrying a heavy load if there is a pot hole or high spot on one side. I would tell a novice operator "keep the load low and slow" on uneven terrain.
It goes a bit both ways. Front steer type loaders (Avant, Cast, Vermeer etc) can tip over as well because they have the rigid frame. Giant loaders made a nice video on this: ua-cam.com/video/ooWzv-zz0HA/v-deo.html& (Giant Loaders G1500 comparison to Bobcat L28)
The Homestake Mine in South Dakota had issues with center-oscillating EIMCO 921 loaders, they tended to tip on rough ground. An oscillating rear axle bolster is preferable as it doesn't affect the machine's center of gravity nearly as much.
@@Miniloaders The reality of the physics is when carrying a load the ridgid joint will be more stable. The oscillating joint would be be better for digging or pushing. Giant does have the oscillation damper option calle Stabillo to remedy inertia caused by radical terrain variations. There is a video from Giant.
Dang good advice 🤛
@@Dirtmonkey We Appreciate You 🙏 ❤️ 🙌
When he talked about the supply of units that was a major red flag for me
Digging this guys crocs…..lol
Style comes in many forms 😎
He gets points in my book…lol
Hey Stan that's a sweet machine I hope it works out 👍 you have me considering a small loader over a skid steer 🤪 love your videos just real life stuff and know bull 💩
I'm surprised you didn't get the extension boom.
Would it be worth it to explain the purpose and how the Regen process is?
God bless and go get um
I throught harry did a good overview on the regen a bit
I thought you weren’t loading it backwards on the trailer at the dealer per Harry’s suggestion then at the job site it’s on the trailer backwards. 🤷🏼♂️🤷🏼♂️
No. Harry wanted it on backwards to save the doors
@@Dirtmonkey in just have been think that the doors opened the other direction. Makes sense.
You guys should of bought a avant.. 500s are great 800 series are beasts
Never trust a salesman who wears bright yellow crocs
No. Never trust a salesman wearing a suit and tie. A salesman wearing yellow crocs is keeping it real in my book 👊👍
Yeah,cool machine..can’t wait to see what 88k can do
True
So is this something you are interested in now, or was this made before you got the newest loader?
Manitou ftw! Not so sure about the sales guy...lol its the Crocs that are a bit odd for a heavy equipment salesman 😂
stan, go giant! very powerfull!
Stan are we getting a world of concrete video? I don’t remember there being one this year yet
It hasn’t come around yet
I’d suggest a John deer loader depending on the size you want we had a 244j it was great
Hard pass
@@christomac2883 good thing I didnot ask bozo 🤡🤡🤡🤡🤡
Hey stan, any recommendations for someone to do dirt work north of Duluth?
I was curious when he was making his turn does the tractor have a zero radius will it turn into its own tracks it kind of didn't look so sometimes that is a nice ability it's funny though to me that the skid steer world hasn't come up with a oscillating track system on their machines and even cooler to have a crab mode now it's nice to drive a tractor when you're high up you have more visual but I've always loved the skid steer you have a lower clearance lower center of gravity you can seem to go into more places with a skid steer but yes you tear everything up underneath it today I was using a little ditch witch ride on skid steer unfortunately I don't know the model because the stickers on it have been peeled off but that little machine made a two-day job by hand and wheelbarrow a one-day job and the funny thing is is that the bucket on the machine would probably take two and a half scoops to fill up your standard wheelbarrow of material we like to mount our wheelbarrows it saves at least 10 less trips I don't know if that was a purchase or a lease or a lender but can't wait to see it in action
Stan are you just testing I know how much you like the Kubota last snow season are you also look at purchasing another one of them as for the help situation no call no shows are just a thing as business owner we have to put up with day to day it sucks and if you say something it’s like your wrong and if you fire them just end up doing it yourself🤷♂️
I sold 2 loaders so I need some to replace those
💪
Yellow Crocs?!!! How about boot's
DPF was a absolute pain on Detroit truck engines.
So what I have learned is do not under Any circumstance buy a piece of equipment with DPF what a pain in the ass. Does it have High flow hydraulics?
Unfortunately you can’t get em any other way now Adays unless you buy used older stuff
Nice video. Staff tolerance is difficult to manage. How much crap do you tolerate.
I like getting crap. Keeps things real.
What happened to the kubota loader you had for plowing
I still have it. Love that little machine
@@Dirtmonkey
Would love to see it used in a few videos
The pictures of the unloading invention are pretty crap. I will still send something sorry for the delay. If you remember.
Why not use the kubota loader u bought in the winter?
I need a couple more loaders for plowing.
Not too many of us showcasing Manitou Machines...Here is my 3200VT :ua-cam.com/video/a8Y6QOVqyg8/v-deo.html
Nice 👊
The dealer rep is wearing yellow crocs!?!?!? Really?? Very unprofessional in my opinion
Haha do what ya gotta do in my opinion 🤷
They were Gehl crocs haha 😄 😆
Maybe he's got fucked up feet from working all his life and crocs are comfy
Any advice on avant 860i wheel loader have you tried them out.
Have you looked into the kubota loaders?
I bought one
@@Dirtmonkey awesome! I just went back and watched the video. They have a smaller one, that’s the R430 if you were looking for something to get into yards with. I believe there’s even a backhoe option for them
Little italy east rochester say hello
What size push box would you recommend on that unit?
I thought the kubota you got last winter was the new loader. Are you getting another one?
Here's an idea let's build a carbon trap in a diesel engine to hold the carbon particulates so they don't go to atmosphere, then burn it out so it all goes to atmosphere at 1000 degrees all at once.... Delete everything....
Price include shipping ?
are you going to get a new excavator for next season? as your old one is getting old and rough
I've worked on Manitou. They're junk. The older ones and the new ones.
What’s junky?
how much
Where’s Franky?!
Up north. Working
What's up with the dudes yellow crocks?
You’ll have to ask him and let me know the answer lol
Fire trucks are the same
😎😎😎😎👍
😎👊
If you dnt regen it will so very sluggish
So true -it will dog out for sure
Nothing screams professional like yellow crocks 🙄
I would rather buy something from someone keeping it real in yellow crocs than a fancy suit and tie guy.
What do you think about caterpillar
Good stuff. Lots of money.
@@Dirtmonkey yes
is he waring corcs???
You said no Def worries at beginning than in the end he says it has definitely, didn't know weight
what happened to your chinese loader ?
Didn't u just buy a kubota wheel loader
Yep. Bought a Kubota not long ago. But I sold 2 other loaders
@@Dirtmonkey did u sell the sledge???
here to help
👌👊
Hmm? 🤔
Just wait when you can only get
It in EV version. You will be on a job site and it goes dead. Diesel generator to the rescue
Ha-not on my job
I don't trust anyone who wears crocs. If I would've seen him wearing those when I walked in, I would've walked straight on out.
You guys are ruthless 😂
Agreed, joking aside. I want to talk to someone who works outside in work boota, not crocs as a salesman
Does it have articulated rear steer like a John Deere? I’m going to say no. Deere is the only one in the industry that has that as a standard option on 3 models. Why don’t you try a Deere and go head to head??
You should never buy anything from a man wearing yellow crocs!
Comment
😁🙏👍
Tracks or nothing..