how to set up for MSC and MSS series
Вставка
- Опубліковано 4 жов 2024
- Dear customer, you can link the tube to the water tap in your house if you have not bought the spare pump , just please check the size of the water flow carefully and slowly , thanks ;
I love these little Chinese pot stills. I have been using mine for the last 5 years and it hasn't missed a beat. I've experimented with so many different kinds of mash also. I'm buying another one so I can have 2 going at the same time. secondly I have found by shutting off the valves in the condenser and filling it with ice and water works well and eliminates the need to run a pump.
How do you use this for distilling essential oils?
good instruction video if you can read Chinese,
sorry, but there is no sound in the video, these products are very easy to be used and assembled , and i will photo some new videos soon ;
HELLO I WRITE FROM ITALY, I WOULD LIKE TO BUY ONE OF THESE DISTILLERS ON AMAZON COSTS 75 EUROS, BUT IS IT WORTH IT? I UNDERSTAND WHAT YOU NEED TO KNOW HOW TO DO IT BUT IS IT SAFE? IS IT WORTH WHAT IT COST OR IS IT EASY TO BREAK? THANK YOU
Geht das auch auf dem Elektroherd
Hello
Can buy the accesories of the MSTC and MSTS Series to put them on the MSC and MSS?
What size pump do you recommend?
Can someone point me to the directions on how to make the mash? This is confusing. I just ant to have the process from start to finish. How to make the mash to using the distiller.
how much liquid can you safely put in the pot just prior to the distillation process?
You want to fill it 4/5 full.
How many gallons per hour is your water pump? and what is the capacity of the pot still? how many gallons of mash can you run at a time?
the specifitions of the water pump is :
height of flow water : 60~80cm ;
amount of flow water : 200L ~ 400 L per hour ;
customers can buy the water pump from their local store also ;
thanks ;
I use Aquaneat 50 gph. Works great. Infact I had to turn the pump pressure down because I didn't need all that lenth. I made a chiller unit in a 5 gallon bucket. In the bucket is the pump, ice and water. But the top of the return bucket has to be lower than the return outlet from the coil (gravity on the return).
The pump I got from Amazon for like $6.00. Well worth it. I need it to make distilled water for my CPAP.
Same audio problem as the last on I watch.....there isn't any audio. I also didn't read that I needed a submersible water pump when it was advertised.
+Mark Curtis You don't have to have one. I've seen various ways to keep the coils cool. Some just add ice, and use the hose to drain excess water. I plan on hooking mine up to my sink and just run cold water on low. You can buy an adapter real cheap at the hardware store. Someone suggested a induction hot plate for heating the pot, for better temperature control, portability and no open flames to worry about. So I'll be placing mine right next to the sink anyways.
you can order the water pump from our amazon store , or ebay store, thanks ;
So, now what ??? what are you putting into the pot & where can I get it ?
its called mash. do 30 minutes of research about how to make liquor, before you bitch people out in youtube comments.
Really rubbish answer, a few pointers would be basic. not bitching, just looking for a small amount of customer service.
Lol you don't need that fermatation valve on the distilling process.
Dommage pas en Français...
Just received one (MSC/MSS) as a gift. Two questions. (1) Does it matter which side (inside or outside the lid) the silicone ring gaskets for thermometer and exhaust/airlock are on? (2) Does it matter which side of the tube from the pot to the condenser the thermometer and exhaust are placed? Now, to Google mash recipes.
Can someone point me to the directions on how to make the mash? This is confusing. I just ant to have the process from start to finish. How to make the mash to using the distiller.