Hello, If you are using the Ooznest interface for the Duet Web Controller and this kind of models of XYZ-Probe. Don't forget that you need to start a Z-5 (or lower) from you Z -Home position and be in a X-Y position roughly aligned with the hole in the probe. Thanks for your work on it Ryan!
Really useful - thanks. In the Touch Probe Command Guide document, the Z Probe commands has no G10 command to store the offset co-ordinates. I assume we'd need to add in G10 P0 L20 Z offset value?
Thank you very much, Ryan, for very informative, interesting and useful videos. Can you please tell if background information is stored somewhere on the www? For example: Is the g-code/GRBL-code for the XYZ-positioning stored somewhere?
How do I use the offset calculator if I have different measurements of my xyz probe than yours. I don't understand what I'm suppose to be measuring for my probe offsets and travel distances. Do you have a video explaining how to use the offset calculator?
I am afraid we don't have a guide how to use the offset calculator. You just need to measure your probe dimensions and then the offset (The part not cut away), and put it into the calculator.
@@ooznest It be nice to have a short vid as I'm not sure if I'm doing it correctly. Numbers don't seem to add up but then again I'm not 100% sure I'm doing it correctly to being with. Yes I'm still a newbie :)
Very interesting and very helpful indeed Ryan, thank you so much, just what I was looking for. Actually, I was going to make one of those touch probes, but can I just ask ........ will you be making some of these and selling them in your shop? I'd buy one : ) I did notice the wry smile when you mentioned not to forget to remove the crocodile clip from the spindle ................ you speaking from experience!? ; ) TURK
In an electronic point of view, is it just two wired connected to the duet controller or do you also need to add some stuffs like a resistance or something?
I mean the command to tell to the duet controller that we have connected a zprobe on the duet controller. The probing itself is in your guide in comment.
@@ooznest HI.. if we need to cut POM ( Plastic material ) with 17 mm of height and 48 cm x 48 cm total dimensions, wicth machine is better.. the 75 or 1000 ? Thanks
Hello,
If you are using the Ooznest interface for the Duet Web Controller and this kind of models of XYZ-Probe.
Don't forget that you need to start a Z-5 (or lower) from you Z -Home position and be in a X-Y position roughly aligned with the hole in the probe.
Thanks for your work on it Ryan!
Hey, thanks for the comment!
Nice job bro. From INDIA with LOVE 🥰
That's really good Ryan - gonna make one for sure. Thanks
Thanks for watching our video. If you have any questions feel free to ask below, and we will get back asap.
Ooznest I’m considering purchasing a workbee does the touch probe come with it?
Hi, i am afraid it doesn't come with it. But a great little project to make with the machine. We will be releasing a touch probe for the machine soon.
Really useful - thanks. In the Touch Probe Command Guide document, the Z Probe commands has no G10 command to store the offset co-ordinates. I assume we'd need to add in G10 P0 L20 Z offset value?
Hi, thanks for the comment, will get back to you Monday to verify this.
Command has just been updated :)
Thank you very much, Ryan, for very informative, interesting and useful videos. Can you please tell if background information is stored somewhere on the www? For example: Is the g-code/GRBL-code for the XYZ-positioning stored somewhere?
Hi, Our pleasure, there's a couple of links on the description which have all the info you should need :)
Hi Ryan, just watched the video and will be making my own touch probe shortly. Where can I find the PDF file you mention for programming it ?
Hi, there are links in the description :)
How do I use the offset calculator if I have different measurements of my xyz probe than yours. I don't understand what I'm suppose to be measuring for my probe offsets and travel distances. Do you have a video explaining how to use the offset calculator?
I am afraid we don't have a guide how to use the offset calculator. You just need to measure your probe dimensions and then the offset (The part not cut away), and put it into the calculator.
@@ooznest It be nice to have a short vid as I'm not sure if I'm doing it correctly. Numbers don't seem to add up but then again I'm not 100% sure I'm doing it correctly to being with. Yes I'm still a newbie :)
just got a workbee and alot of this is outdated now as the workbee control screen has probe options can you make a new video on this cheers
Please follow our guides here: learn.ooznest.co.uk/
What size machine are you demonstrating on in this video. Also, what G-Code software are you using in the video?
Hi Chris, this as 750x750mm WorkBee. The WorkBee uses WorkBee Control: learn.ooznest.co.uk/Guide/How+To+Use+WorkBee+Control/22
So could you turn the touch probe around and use that to zero to the spoilerboard
Yes that is possible to probe just the Z
@@ooznest so then you just set the x n y manually by selecting set x n set y on duet web control right?
merci pour la vidéo .vous avez trouver ou votre connecteur en aluminium ? . on peux le mettre sur mach3 ?
Should work with Mach3, it is quite a standard system
what if i only want to probe x and y? Also what if i want to x y probe top right corner?
That can all be done on our new software here: learn.ooznest.co.uk/Guide/Setup+the+Ooznest+XYZ+Touch+Probe/61?lang=en
Very interesting and very helpful indeed Ryan, thank you so much, just what I was looking for. Actually, I was going to make one of those touch probes, but can I just ask ........ will you be making some of these and selling them in your shop? I'd buy one : )
I did notice the wry smile when you mentioned not to forget to remove the crocodile clip from the spindle ................ you speaking from experience!? ; )
TURK
Not at the moment but if we get enough interested we'd love to start selling them!
In an electronic point of view, is it just two wired connected to the duet controller or do you also need to add some stuffs like a resistance or something?
Just two wires, like a NO limit switch
@@ooznest Great thank you!
Could you tell me on the pin to use for it and the gcode commands to set?
I mean the command to tell to the duet controller that we have connected a zprobe on the duet controller. The probing itself is in your guide in comment.
Hi ooznest
I ask u what mean 1/4 bit and 1/8 bit ?
This is referring to the diameter of the endmill
Would that work on a Duet WiFi? If yes, how?
Yes it will, we have a guide coming out soon and a touch probe. Keep a look out on: learn.ooznest.co.uk/
@@ooznest Awesome! I'm looking forward to it!
Whats the size of the machine you are working ? Its a 1000x1000 or its other size ? Thank you
Hey, we are using a 750x750mm, it will work on any size machine.
@@ooznest HI.. if we need to cut POM ( Plastic material ) with 17 mm of height and 48 cm x 48 cm total dimensions, wicth machine is better.. the 75 or 1000 ? Thanks