What's New: JConcepts Street Eliminator Drag Car Bodies, Wheels & Tires
Вставка
- Опубліковано 23 лип 2024
- Building a Street Eliminator Drag Car is a lot easier with these Street Eliminator products from JConcepts.
Street Eliminator Bodies:
1966 Chevy II Nova: www.amainhobbies.com/jconcept...
1991 Ford Mustang Fox: www.amainhobbies.com/jconcept...
Street Eliminator Wheels & Tires:
Startec Wheel Set: www.amainhobbies.com/jconcept...
Hotties Front Tires: www.amainhobbies.com/jconcept...
Hotties Rear Tires: www.amainhobbies.com/jconcept...
JConcepts Traxxas Street Eliminator Concept Guide: images.amain.com/images/Link%...
RJ Speed Wheelie Bars:
5 Inch: www.amainhobbies.com/rj-speed...
7 Inch: www.amainhobbies.com/rj-speed...
Think your car is fast? www.amainhobbies.com/dynamite...
Do you have a thing for R/C Drag Cars? www.amainhobbies.com/rj-speed...
Every Street Eliminator needs sponsor decals: www.amainhobbies.com/traxxas-...
For all of your RC needs visit AMain Hobbies: bit.ly/XcAuJr
Follow us on Instagram: / amainhobbies
Like AMain Hobbies on Facebook: / amainhobbies
Follow @AMainHobbies on Twitter: / amain_com
MUSIC BY: @DCUTTERMUSIC / HTTP://WWW.DAVIDCUTTERMUSIC.COM - Спорт
Very cool build, this what.the hobby used to be about, putting together parts to make whatever vehicle your heart desires.
You should do more drag car videos
I saw the video of Mr. Woodcox and the aftermath of the Camp Fire. I respect him and I think he is one lucky man to be alive. I then got an email from Amain regarding the fire and I just wanted to comment on the newest vid to say that I am deeply feeling sorry for all who have lost their lives in this fire and for all that Amain has lost. Life is precious and should be valued more than some people do. It is not something to take for granted. Yes, I do a lot of dumb stuff myself that can very well start a forest fire, but I guess you could say that I am practicing safety when I’m not being safe... like blowing up capacitors and/or damaged lipos. I have a fire extinguisher and at least one bucket of sand at the ready. I have easily accessible med kits by my rc shop in my garage and I charge all my batteries in a vented metal box. I store them at a safe voltage and don’t overcharge them. I take care of them way more than a lot of people do. Some guys say I’m a bit too cautious with lipos, but I don’t think so. They are not a joke. I have had a lipo and a lithium ion battery fire before in my garage at both times and I have thankfully been in the area to get the batteries out. I have had many close calls with losing my life and I hope I don’t have any more ever again. My best wishes go out to all who have suffered or are suffering from the Camp Fire. When I attend RC races, the most dangerous thing is to turn marshal the races. When I marshal the 8th nitro buggy and truggy and electric 8th truggy races, it is extremely unnerving and a bit stressful. I have seen many drivers have to be driven to the ER because of serious injuries by a direct result of getting hit while turn marshalling. That’s why I always keep a med kit with me when I go to a track. Whether a kid needs a band-aid or a dad broke his ankle or Simeon’s has an inch deep gash on their leg that needs stitches, I’m ready. Everyone must know fire safety, knife safety, how to drive without putting other vehicles in dangerous situations... I would never wish what has happened upon anyone and I hope I am never in a position when I must be in such a terrible predicament. Whatever happens, I will continue to buy from my local hobby shops and Amain hobbies when they don’t have the thing I need. If you’d like to talk to me more about this or anything else Amain, please let me know because I’d be happy to.
-Ev
Whups! “Simeon’s” should be “someone.” ...friggin autocorrect...
Nice video 👍 like the setup looks good drag racing is definitely on the take over 😂👊😎
Love your videos
Pretty cool drag car
SICK!!!!!!!!!
Sweet I have some Team Associated sc and buggy. Thanks for the update.
I Build a Asso b5m do da Drag Car the Sc5m Chassic was Perfekt whit The B6 is The Same Works Good luck Manuel from Austria Graz
Badass 👍
What did you use for body mounts front and rear?
Looks very nice maybe i buy it
Is there a reason for, or advantage to using an SC or buggy chassis vs something like Losi's No Prep dragsters?
Is the body durable? So it would survive using it off-road with regular sct tires and suspension
I have an ARRMA Senton 4x4 3s blx. Will the Chevy body fit? I know the body posts probably won't line up, and I'll use buggy arms. I'm just curious about the wheelbase.
@@AMain_Hobbies Thanks man, that really helps me out a lot. +1 Subscriber
I have a good feelin about this vid
I have Helion Invictus rc truck would the this body fit it ?
I will appreciate if yall could come out a conversion video step by step guide using both at slash and a buggy as I am intrested in the design and want to build one thanks
Rc driver on youtube has a guide for the slash.
I'm buying it right now
Congratulations! If we can help you, let us know! Thanks.
-Brett
Building one off the same car/chassis. Any photos on how the front shock tower body mount area is?
You bet Jonathan. Shoot me an email and we can help you with that; can't share photos here. Email is brettb@amain.com and please add UA-cam in the subject line so it's noticed easier. Thanks Jonathan.
-Brett
pretty snazzy
Can the jconcepts hotties handle 3s without ballooning? I aiming for 60-70mph.i am not sure if I should tape the inside?
No unfortunately. JConcepts says they can handle 2S use only. The Pro-Line Hoosier are only 2S use as well, but they do not balloon as much as the JConcepts. www.amainhobbies.com/proline-hoosier-drag-slick-2.2-3.0-sct-rear-tires-2-s3-pro10157-203/p969583?v=949171
-Brett
What do you mean by short course car & frame ??
Slash lcg would work ? Or nitro 2wd slash chassis work for this body
lay jay yea 2wd slash works but you have to narrow the rear end with bandit parts.
What body mounds do you use in the front?
They're the Team Losi Racing 22SCT front body mounts, modified to fit.
-Brett
Need the part nomber for the chassis?
Cool! How fast are these things?....how much just to buy that one from ya?
We never tested the top speed because of this employee car but it probably hits 50, 60MPH. But he also has it geared for a 1/10 strip run.
-Brett
Would this body work well with a stock Traxxas rustler
not wide enough
What compound tires are dose idk if I should get the green or gold ones my body sits about half a inch above the tires and I don't want tires that ballon and Rip the body or something
The Greens are soft and ideal for colder temperatures outside, where the Gold are a little harder, more ideal for when it's a little warmer out. I'd imagine the Green would be most ideal for a drag car, but it depends on how hot it gets in your area.
-Brett
@@AMain_Hobbies ok thanks it stays about 50 in the winter and about 80 to 100 in the summer so I should probably go with the gold
@@jacobbarkley2633 Ok, that sounds about right. Good choice.
-Brett
If I was a drag car guy I’d get this body
But the mustang would be my first choice, I’m a ford guy n owned 4 mustangs
Is there any TRAXXAS BANDIT hot rod, Rat rod, or Drag Bodies? I would prefer a Ford 32 Coupe Body. But if there are any that look cool or you think look cool, tell me.
No, nothing is a direct drop on perfect fit. There are bodies like you describe, but to fit, it's going to require some new parts, and some customization. The bandit could be used to make a street car like in this video, but you'd need the Slash chassis and Slash arms I believe to achieve the correct wheelbase and width of the Street Outlaw style bodies.
Here are some links to some body options:
www.amainhobbies.com/proline-super-j-promod-short-course-drag-car-body-clear-pro3523-00/p897451
www.amainhobbies.com/proline-octane-sc-1-10-short-course-drag-body-clear-pro3524-00/p897452
www.amainhobbies.com/search?cID=1000&s=street+eliminator
Let me know how else we can help! Thanks.
-Brett
Did you use the wing mounts on the rear as body mounts?
Yes, you nailed it Andrew. The wing mounts become the rear body mounts.
-Brett
@@AMain_Hobbies K. What are you guys using for gear ratios? I am looking at running a 5.5t or 4.5t mod motor on mine. But I don't know what to use. I am going to be running a b6.1.
Hey Andrew. Our guy Matt who made the TLR 22 Original Buggy a drag car, he said he used the biggest spur gear he could find, then matched it with the largest pinion that would fit. Using a Castle 5700mAh motor. He has been adjusting with different pinion sizes. Hope that helps.
-Brett
To add to that, his spur is a 86T and 20T pinion.
@@AMain_Hobbies k. Thanks
What car did you guys use
@@AMain_Hobbies You say it's an original/legacy TLR 22. Does the current TRL 22 have the same dimensions as the original? Or do all current 1/10 buggies (any brand) have the same dimensions?
Would that body fit my sc10rs 1/10 scale?
No, not without some other parts, like shorter buggy arms and some tinkering. These cars require a bit of tinkering and tuning to get a proper fit.
-Brett
@@AMain_Hobbies you have any 9deas what bodys might fit ?
@@shootermcgavin6610 Sorry man, most of these Drag bodies are intended for a short course with short arms, so none of them will fit your truck unless you narrow the width. If you just need a body, I can recommend some nice Short Course bodies?
-Brett
@@AMain_Hobbies dude that woyld be awesome having a hard time looking for one. I would really appreciate it. And new sub by the way youre awesome.
Very cool, unfortunately you guy's have been out of stock on allot of products. I've had allot better luck with Amazon especially on tires and wheels in this category. Inventory is something that every company must have to be successful. I know Covid 19. Funny but that's only for companies that are unprepared for there customers. The successful ones find products. Even if it means finding and creating new sources to meet the demands of there customers. No hands up or arms crossed. Because when you don't have the product we find someone who does. You know what they say about excuses.😎
How much pay?
Do they make any bodies for the large groups of people that drag race 1/5 scale Gas ⛽️ Bajas ?? That would be pretty cool if they did !! I would definitely use one next season . We run 330 feet not baby’s 132 or 200 feet . 330 is a challenge for anyone. Anything can happen and anyone can when at any time no matter how much money you got in the Baja transmission platform with gas ⛽️ engine! Even the poorest guy can win. Unlike easy 132 feet
AMain Hobbies I just tried looking at the link you gave me and it show a mistake message??? It won’t show any bodies? I would like to see those you mentioned!
AMain Hobbies thank you! Keep up the great work over at Amain and god bless! I’m aware of what has happened with all the fires 🔥 out west by you and I hope everyone is ok! Also I have many subscribers comment me on my past nitro videos that they can’t get any RACE INSPIRED LRP .32 X Series engines from you because it says back order or out of stock? My friend Rick at RB Mods likes to mod them also and he’s out of them as well . Any luck on some more ? If so just let me know and I’ll let all my viewers know about it when there back in stock? Thanks again
AMain Hobbies thank you Sir💥👍💥🤝Have a good one God Bless .
This car what price
Nice but one thing about RC stuff the bodys are way to wide and look out of scale
Someone should build a kit version for people to just buy and put there electronics on and drag race
Lower wheelie bar and add weight up front
Bitchin;) Brett
😂😂👍🏻👍🏻😂😂
Thanks for making a cool car body look like crap. Three piece really?
Cool. Its too bad J Concepts bodies are Thin Flimsy Garbage no matrer how cool of a paint job!
Hi brow i Converd a Xray xb2 2017 do a Drag Car i build a new Chassic from 2.5mm Aluminium whit Mid.Motor The Works Perfect ....when You need help read my Good luck Manuel from Austria Graz
I have been interested in the street eliminater concept. However it seems that these products have seemed to be Unavailable for the past few months. I Finnaly said Fuck It! I don't need this Bull SHIT, and have given up waiting on products that don't seem to avaible or not even exist at all!