you bough the center cap? im looking to buy this wheels but that one ill but has a different a smaller center cap ad i dont see any holes to put the cnter cap plase help?
Is the purpose of beadlocks only for very low tire pressure? Do they serve any other purpose? And at what psi must you go to warrant needing beadlocks?
That's definitely the largest benefit. I think most don't really air down past 12-15 without bead locks but everyone has their own threshold. The other thing I really like about bead locks is the ability to do work on them myself. Obviously its not super convenient but if you needed to let the air out and take the wheel apart of a trail for a patch or repair, you can actually do that with pretty basic tools. Whereas popping off the front bead without a machine is quite challenging and bound to make you scratch the front of the rim doing it with pry bars.
I have a similar SUV. 2013 Landcruiser Prado with 4.0L V6. It has stock wheels 265/65/r17. I have done a 2 inch suspension lift. Now i want offroad beadlock wheels. What wheel size, width and offset do you recommend?
Can you talk about what kind of trimming you need to do on the body to fit these tires? I have a body mount chop done and a viper cut. But will I need to do anything to the body to fit these?
If you want 34-35s, you will probably have to trim some of the metal brackets for the fender, plastic around the fender area near the firewall and cut/hammer/seal the pinch welds. I have a video kind of covering this when I switched to 34s
Definitely, they are 34s. You could fit beadlocked 285/70/17s with zero offset if you want to skip the viper cut and BMC. The viper cut is not really necessary but 34s will require aggressive plastic trimming :)
Same set up for my taco. Installing Monday on my 295/70/17 maxxis mt. Rrw had a blem set a good price raw w black bolts
you bough the center cap? im looking to buy this wheels but that one ill but has a different a smaller center cap ad i dont see any holes to put the cnter cap plase help?
Amazing! Well done, love it, thank you for sharing! 🥰
The RR6's look good on the 4runner. I'm torn between the RR7's or keeping the stock TRD OR wheels. What offset did you choose?
I have -25 mm now. Many of my photos and videos were 0 offset with a 1.25" spacer so basically -32 mm offset.
Is the purpose of beadlocks only for very low tire pressure? Do they serve any other purpose?
And at what psi must you go to warrant needing beadlocks?
That's definitely the largest benefit. I think most don't really air down past 12-15 without bead locks but everyone has their own threshold.
The other thing I really like about bead locks is the ability to do work on them myself. Obviously its not super convenient but if you needed to let the air out and take the wheel apart of a trail for a patch or repair, you can actually do that with pretty basic tools. Whereas popping off the front bead without a machine is quite challenging and bound to make you scratch the front of the rim doing it with pry bars.
I have a similar SUV.
2013 Landcruiser Prado with 4.0L V6.
It has stock wheels 265/65/r17.
I have done a 2 inch suspension lift.
Now i want offroad beadlock wheels.
What wheel size, width and offset do you recommend?
Were the tpms sensors a direct fit from the factory tires?
I believe so
I like the looks of the bead locks, off topic but what pants are you rockin in the install videos the navy ones look super comfortable
Can you talk about what kind of trimming you need to do on the body to fit these tires? I have a body mount chop done and a viper cut. But will I need to do anything to the body to fit these?
If you want 34-35s, you will probably have to trim some of the metal brackets for the fender, plastic around the fender area near the firewall and cut/hammer/seal the pinch welds. I have a video kind of covering this when I switched to 34s
@@OverlandEngineer ok thanks. I will look for your video.
@@nx1z no problem!
I'm still on the fence between BFG Ko2s vs KM3s (295/70/17).
Where are you located?
@@OverlandEngineer Orange County, CA
What is the color matte gunmetal or gloss gunmetal?
Matte bronze is what I have!
@@OverlandEngineer the ones in this video don't look like matte bronze
@@enriqueweb4955 that’s why I like them
Tires with benefits
Hahaha
Curious if it looks like these would have fit without the BMC and viper cut.
Definitely, they are 34s. You could fit beadlocked 285/70/17s with zero offset if you want to skip the viper cut and BMC. The viper cut is not really necessary but 34s will require aggressive plastic trimming :)
Great video! What did you do with your old wheels?
Thanks! Just took them to the dump.
Lol just kidding, I sent them to a new home :)
@@OverlandEngineer lucky home