I Rented a Firewood Processor For 8 Hours (2022) - Homeowner Review of Dyna SC-16
Вставка
- Опубліковано 6 чер 2024
- I rented a Dyna SC-16 Firewood processor to finish out my firewood for the season. This is a review and summary of the 8 hour firewood processor rental where I detail my likes and dislikes and show you how much firewood I was able to produce from the rental period.
Used in this video:
Husqvarna 12" Log Tongs:
amzn.to/33tqvbm
Large angle wrench set:
amzn.to/31NuDTc
For DDD Hats:
email us: DigDriveDIY@gmail
mention "Hat" in the subject line of the email
Send us something in the mail:
Neil Koch
P.O. Box 137
Harlan, IN 46743 - Навчання та стиль
![Is BIGGER Better? [Firewood Size For Outdoor Wood Boiler] - Why Split Wood For A Large Boiler?](http://i.ytimg.com/vi/h394VENnbMY/mqdefault.jpg)
![Is BIGGER Better? [Firewood Size For Outdoor Wood Boiler] - Why Split Wood For A Large Boiler?](/img/tr.png)
Great video....a lot of work just for that. I own an SC16 that I rent with me as the operator. Committing to burning fire wood as a primary heating source requires all of the work you performed...no matter the equipment. The most productive piece of equipment is the processor... I regularly process 20 Full Cord of firewood in 8 hrs of machine time. At my rate of $750 for 8 hours for the processor and operator, that is $12.50 a face cord or $37.50 per full cord. A few things to keep in mind for productivity 1) let the wood pile up, then load into transportation 2) properly prep the logs for processing 3) make sure the logs and the processors are in correct proximity 4) do not fuss with logs larger than 22"...period. They slow production too much. 5) When cutting the last piece of the log, use the measuring rape on the side of the feed trough prior to the cutting bar, cutting the short end of the log so that the loge does not tip into the splitting chamber. Then the last piece of firewood is cut to length, the second to last is the odd or short piece. As you know firewood is not cheap, nor is processing it. You are doing as well as a guy can do, one week a year with friends and family, free logs to process, and equipment for proficient processing. You could never do that by hand with a splitter. You processed about $2750 worth of firewood in my area. Add up your time and expenses to see how you did. Typically, if you have access to free logs, you are ahead of the game. Process it, buy it, or buy propane....time is money. A guy could do worse....
Thank you for a terrific comment. I appreciate the in depth feedback of an experienced operator while withholding criticism of my inexperience. I really value your assessment and information for making it even better next time. Thanks so much for watching and taking the time to comment.
Sounds like you should just bring the logs home and hire this guy ^^^ very reasonable price
Use more paragraphs.
@@jakebredthauer5100 No he's fine...nobody here is an English major anyways and most of us despised those particular classes in the 1st place. Use more paragraphs...lol!
@@jakebredthauer5100 I'm happy that he used punctuation 😀
Living in the northwest for many years, I found that firewood heats multiple times: It provides heat when you cut it, when you split it, when you load it, when you unload and stack it, and finally when you burn it.
And finally you get heat when you clean out the stove and dispose of the ash!
The ash also works great over ice and snow. A good anti slip
It’s a nice thought, but you are providing the energy for all but the burning, not the firewood.
@@BinglybertSlaptyback So? Staying strong and limber is not a bad thing.
My old man would say something very similar when we were out getting wood. He used to pay us $2 per trailer load of split wood stacked in the shed. Used to buy a lot of lollies with $2 30 years ago!
I think I was most impressed by the effort you made to clean up after the project. You keep good neighbors who are willing to help by respecting the space they lend you. Thanks for sharing your experience.
Yes, thank you
I grew up in farm community and was taught to leave an area better than you found it. Doesn't matter what area or what you're doing.
Sawdust and bark will make good compost, too.
I believe that you should have a eastonmade 22-28 . If you have the wood already cut you can split 2 cords a hour with 1 good helper. Y ou have a way to much labor fuel rental costs for only 11 cords.
Can we get a round of applause 👏 for Shaggy the young neighbor man?!?! I feel he maybe the unsung hero in this whole process! The stack jobs were tight and well done! Bravo...Bravo!!!
It's a skill, and an art to stack wood, especially large quantities like that.
@@nunya3163 Absolutely!!👍👍
Mom and dad raised him good.
@@tannercook4322 Yes and they should be proud!
I love him.
I love seeing farmers doing their own repairs successfully. Look at those parts in the shop!!
Really enjoy these videos. I've never been on a big production project like this but growing up with 3 brothers and a wood stove to heat a 3 story house I know the feeling of teamwork, accomplishment, and problem solving involved.
Thanks Elijah!
Great video, brings back great memories, I saw a lot of videos where the cutted log always falls into place with no issues, that is one of the 3 problems I saw where a simple metal slide could solve the problem, and as the splitter piston goes to push the log it lifts the slide, second I would select, prep and bring the logs home prior processing setting them up so one guy just picks them up and no selection necessary they are just all in, not to lose ALL that time traveling, collecting dust selecting sizes, cutting pieces too big, or anything else, and the conveyor would be aligned close where the wood would be stacked, thirdly prepping the machine by validating and setting up fuel, motor oil, hydraulic oil, chains, necessary tools, doing this you would reduce the number of specialized operators, and you would just need 2 operators and the rest are stackers, you could have a lot of stackers as their mission would be really simple, they could even make a human chain to accelerate the process, this would greatly reduce the elapsed time, and also yield a bit more wood.... my humble opinion!
It's always fun to see these videos. We still use the old method for about 25 face cords for the furnace and another 5 for the sugar bush. A few years ago I had a health problem. I had a pile of logs and a few friends and neighbours agreed to come over on a Saturday in late October and we would get started cutting and splitting. The first guy showed up with his chainsaw at 7:30 to start cutting, shortly after there were about 12 guys, a backhoe , 2 splitters and 2 dump trailers. Long story short by 12:30 22 face cords were all split and stacked in the shed. Everyone who was here that day still talks about it and would like to do it again.
That's a great story Scott! Love hearing about stuff like that where folks come together to help. You made a lot of wood in a short time! Thanks for watching!
Now those are good friends and neighbors to show up and give you a hand like that I wished I had people to show up and give me a hand like that Lord knows I've helped a lot of people over the years and rarely get help and return other than one good friend that if I need help he's always there and when he needs help I'm always there for him most of them yeah I'm their friend when they need help but when I need help they're nowhere to be found that's good friends when they show up to give you a man of hand
One doesn't find these kind of folks in the cities... Unfortunately.
Kinda made me emotional hearing that, you'd hope that's the kind of ppl you've surrounded yourself with but you never know. Glad they stepped up for you. I would for just about any of my friends, and I'd build them a home on my property if for some reason I couldn't get them warm that winter
I have absolutely no use for a firewood processor but found your video extremely informative and entertaining. I also enjoyed watching the group effort to get the work done.. great job!
Thanks a lot Brent. I really enjoy hearing that especially from folks that aren't necessarily into firewood. It's great to have family and friends that are willing to work together and also put up with my youtube efforts. Thanks for watching!
You said you don't have no use for a firewood processor you don't split wood or do you split wood with another kind of splitter
It sure doesn't hurt to have friends and family who know what they're doing and are so generous with sharing their time.
For a city girl this was a real treat. Thank you for sharing this endeavor with all of us.
Thanks for checking it out!
My dad has on of these machines and from running it all last summer with me and another guy, you basically went over all the slight problems that can happen when operating this machine. Once you get a rhythm going after sorting out all the odds and ends, this machine can really pound out some face cords. definitely enjoy using this machine over a conventional log splitter.
That’s my Uncle Kenny there. He doesn’t have any skin in the game but keeps coming back year after year.
I love it! Definitely subbing to follow your family’s adventures.
Man, what a messy week, Neil! This was fun to watch. Another 100% great job and a real-world review.
Thanks a lot Ed! Yeah, Murphy's law in full effect here for both weather and operation it seems, but it still turned out pretty good. Thanks for checking it out!
Fabulous team effort and great attention to detail in this video. I love the way you have prepared so well to make this as efficient as possible and only utilise the workforce for the minimum amount of time. Great repair on the machine and so good to see all that wood being processed to keep you and your family warm. From Andy here in Surrey England who has a small domestic wood burner and a passion for good fuel management its a big well done on this video and this team.......Great job!!
Thanks so much Andy. Great to hear from you and thanks for the kind words. I'm glad you found my video!
We did the same thing this year, in Nov. rented a Dyna-16 for the weekend, been collecting logs for the year, took a little while to get smooth with the processer but by the end of a very long weekend we had cut 30 cord worth, next year I'll do a little prep by trimming all the stubs and Y's off the logs. Here in Missouri our winter has been pretty mild so far so I think I will still have about half the wood left and will only need to rent it for 1 day next year.
Always interesting to see how much movement shows up when recorded in time lapse like the jack handle moving. Great video as always!
For some reason I always go home and watch the time lapses first. Always cool to see what you can pick up on that you didn't see as it was happening.
I started using IBC totes this year and it is a game changer. I also ordered a Eastonmade Axis that should be here by July 2022 to turn it into a one man show if needed.
Love the Axis... well, what it looks like. I haven't got to try one yet. I'm jealous! :)
@@digdrivediy whats a eastonmade axis? Maybe try and rent from someone and make a video kinda showing the positive/negatives of it? I know i would watch it..👍🙂👍
Enjoyed the video, I ran a Blockbuster 22-22 for about 10 years and this brought back some good memories. We would run that thing wide open for about 8 hours a day and produce about 20 to 25 cords in a day, me on the processor, one guy in a skid steer with a grapple and another guy prepping logs with a chainsaw.
I admire how your family comes together to work on this project. Thanks for putting together this video. Enjoyed watching.
Our pleasure!
Great organization and good times with family
Thanks Hank!
I'm a one man band when making firewood, that being said I like the IBC totes, although they take a lot more room to store the wood even stacking the wood in them. I just have an old slow box store splitter, but I take the splits directly off the splitter and stack them into a tote so when I'm done for the day whatever I've gotten split is nicely stacked. I like to go out after dinner and split a tote full or two. The bigger part of the process as far as time goes for me is harvesting the trees and getting them to the wood yard.
I like the sound of that. Sounds like a good system. Good way to finish off dinner too.
You do a great job showing the “working details” of this operation, people don’t realize how much effort and time actually is spent on production.
Thanks 👍🏻
I would definitely just pick away at it throughout the year.
Nice video, thanks for taking the time to do it.
I heat my shop with wood up here in Canada. Burn about 10 cords a winter. I don't do the bulk equipment like that. My approach is much simpler, a chainsaw and a stand splitter, and spread out the work over time.
The key is that I do it slowly throughout the year. It's a good way to stay active, spend an hour or 2 a week in the summer bucking up and stacking in the evenings, and I'll have more than enough to last a winter come summer time. And in the winter I just split as I burn throughout the winter, as my splitter is setup next to my furnace in my shop. So I'll bring a wheelbarrow in once or twice a week, split it and stack it next to my furnace ready to burn. It feel effortless really, even though I know if I were to try to jam all the work I put into burning wood into 5 days like you did, I'd have put in probably just as much hours.
The key is you have to be about a year ahead on wood supply at all times though. So when I'm bringing wood into the yard in the summer, I'm bringing it in not for that winter, but the winter after. Otherwise it's too green and doesn't split or burn as well.
So I've got 3 piles of wood in the yard, one green, one dried, and one bucked up. Splitting happens throughout the winter as I go. If I'm going away on holidays I'll spend an afternoon splitting a bunch of wood so that if I have someone coming over to stoke the fire for me, they don't have to split any themselves.
I don't think I could pull enough favours to have that many friends come out for that long and do that much work for me, just to save me some money on a heating bill. I would feel like that's a huge ask. I feel I'm much better off doing a bunch of the work myself, but spreading that work out throughout the year. You e got all year to prep winter wood. No need to do it all the first week of winter, getting miserably wet and cold in the process.
Oh yes. I enjoy that method too. Of my 20 years heating with firewood, I have only used the processor method 3 different years. Most recently I've went the mass production route just to save more weekends in the summer for family time and trips with the kids. As they get older I had planned to revert back to the slow and steady method. I just think I'm going to get there quicker than what I had hoped. I enjoy cutting firewood but not at the expense of losing time with the kids while they're little is all. That's the biggest reason for me now. And I'm thankful that I have family that is more than willing to help. They actually enjoy it and it's not that hard to work running the processor as long as you have anything prepped ahead of time. But I like the way your method works. I look forward to those days when I can just make it part of the routine and get a little more exercise spread out through the rest of the year. Thanks for the great comment and really appreciate you watching.
For what it is worth: just having family get together is worth millions. Unfortunately I do not have that option anymore. I had to haul, cut and split by myself. Very good video and really honest critique on the machine. Take care and stay safe, from Petawawa, Ontario.
Exactly!
nice bunch of wood. between Christmas and New Years this year my 2 sons took off the week to get some things done around the farm. weather didn't allow anything much to be done. Got a load of chop ground for the pigs and moved snow. Temperature hovered between -25C and -39C (-55C with wind) and 40 to 50 cm of snow.
I don't comment much, but I just wanted to mention how cool it was to hear your kind words and praise for your family members. Having good people close to you is something that not enough people get to experience, and I think it's great that you don't take it for granted.
Great video! I didn’t realize that those processors could be rented. Your fireplace must be larger than mine. Some of those log diameters we still enormous. You did a great job recording this, all while concerning such a huge project! Very informative too.
Yes, some of them even split were still 80 lbs.
Another good video. And great observations on the processor. Hopefully those get back to the manufacturer for their next design. All in all that’s a lot of wood in 4 days. I believe the first DigDriveDIY video I ever watched was the first wood processor video. I will be tuning in to see what you decide to try next year.
Thanks a lot Gabe! That's interesting to hear how you found this channel was the wood processor. I'm glad you stuck around. Your hat is in the mail!
Loved your honest review. I am with you on the equipment making things easier. However I have found I use Ibc cages, I cut with a small saw and my 2, 13/15 year old farm girls run the tractor mounted splitter we can process 4 Ibc cages in 3 hours. When you do this for a few short days you can process enough wood for 3 wood stoves for the winter season. It is much more efficient than it seems at the time.
You've got a bunch of good people around you there.
Thank goodness for friends and family.
Thank you for posting this and going over the pros and cons of it.
You bet!
Another great video Neil! 25 minutes of pure entertainment. Setting the whole operation for 11 cords is where it hurts. The processor makes you gain that lost setup time, but in my opinion, you only get even (timewise) with bucking with a chainsaw and splitting with a decent splitter. Especially you have the excavator and skid steer on site that can help you a lot. If you do more than 11 cords, you make it worth the rental (and setup) I think.
That is good observation. I was happy with what we got done at least.
@@digdrivediy I think the name of the game to speed things up would be 1) long, straight AGED logs where the bark has already fallen off. That would be huge for reducing mess AND having cleaner logs. 2) having McDonald's ready for your stacker 🤣
@@PartTimeYooper yup.. i know feeding the help some quality McDonald's always gets everyone moving faster happier (unless your like me bcuz i gotta take a quick nap if i eat 2 sandwiches🙂 damn old age
Great video, and your complaints are spot on! I do 1800. Facecord a year with these, i worked as 3rd shift painter for 2 years for dyna sales, wife and i do 20 cord just under 16 hr, providing minimal breakdowns. Thank you for taking time providing this video.
Thanks a lot James. Thankful to hear that I wasn't too critical from someone that is that familiar with the machines!
Great video, Neil. We enjoy cutting when we can, splitting when we can. I would really struggle to give up the holiday week to just do firewood. Spacing it out over time makes it more enjoyable. We love using the IBC totes and our Split-Fire splitter. We've done several videos about firewooding. I was shocked how much debris that processor makes in 8 hours. And the reaching over and flipping the round would certainly become frustrating. Enjoyed the video! - Chad
Thanks a bunch Chad. Yep, I've done firewood in about every way there is it seems like. Been feeding this beast for 15 years so always trying to come up with more efficient ways of doing it. I'm gonna play around with the totes but I just may need a bigger tractor! I watched your video on how heavy they were a long time ago it seems like. Thanks for checking it out!
Very nice video! You did a great job telling the story and filming the process! And the comments from your viewers are well done as well.
After running Cordking processors for 35 years, I can relate to some of the issues you had with logs that weren't fully prepared for processing. Looks like you've figured out how to handle those problems and will be ready to go next year. The best suggestion I can offer for next year's supply would be to try one of processors utilizing a circle saw. If the wood is kept clean, you won't be dealing with a dull blade at all for your needs. Keep up the good work!
Thanks for a great comment! I love to try one with a circular saw with a circular saw!
Great job! I have two fireplaces at home , I use only birch firewood , I used to saw and chop myself , now I buy ready - made ones .
On winter evenings it is very pleasant to sit with the whole family by the fire when it 's freezing outside and it 's snowing .
Sincerely from Russia.
Neil, I can't add the educated, experienced comments of some other contributors. I can only say thanks for the interesting and entirely fun video - thanks for your time and your family's efforts to procuce this!
Appreciate this comment!
Great video, fantastic hardworking people, thanks for sharing. I think you saved the rental shop a two hour service call for getting after that leak yourselves, I would have liked to hear them throw you a two hour boost ... I really enjoyed this, coming from a guy who uses an 8lb maul to feed our stove.
Thanks! I really appreciate that kinda comment too! :)
I was a hydraulic mechanic in the Navy (Machinist's Mate), and it's crazy how a little O-ring that costs a couple cents would completely hold up production!
Very true!
Fair dues to you buddy, hard working ethic is something I love in people. Good effort.
Im going to be renting one of these in the coming months when spring rolls around. I really enjoyed seeing you operate the machine and your processes with various machinery. Im also going to be documenting with a video as well! hopefully ends up working as smoothly as yalls operation. Also congrats on the success of this video! Shot well, Edited well, Voice overs were ver informative. Heck of a video !
One time the church came and helped cut firewood at my parents must have been 25 people there helping. Cut split and stacked 13 cords of wood in 3.5 hours. I think there was 4 wood splitters probably 7 chain saws and everyone else chipping in where needed piling and bringing rounds to the splitter. Was unreal.
This is how the Mexicans and Amish do it. They swarm on a project and knock it out in no time. People are freaking amazing when they work together.
Nice work! We own a slightly smaller version, and I have the same complaints as you brought up. One recommendation I would give is, use the winch on the elevator only for moving the elevator. After you have extended the elevator, hook the chain back up and put slack into the winch. That way, not only will you not have to climb up to remove the chain, but you will save the winch life as well as use it how it was designed. Again, nice work! Keep it up!
Great tip on the winch. I should have known better. I actually did know but forgot until just now reading this comment. Geez!
Great vid. Thanks for the info. I always wondered how the big machines worked. Doing the work a few hours at a time, throughout the summer with a small saw and decent hydraulic splitter seams a lot less stressful than running the processor.
Love your work Guys! Everyone throwing in to lend a hand. Thats what its all about, Cheers
Ideas for efficiency. I realize you store the wood throughout the year at your friends property and process on his site. I am thinking it would be more efficient to transport all the logs before splitting to your property and then you can run the splitter with the output conveyor leading right to your storage building. Its far easier to transport entire logs than loading the trucks with split logs.
My step dad used to have a wood burner to heat his house. So my bro and i would always (have) to go with him to a friends to split the wood, load into a pickup (with cap) and then unload on to wood stacks at his house. it was back breaking to be in the back of the cramped truck pulling out piece by piece. So 1 year I had suggested just bringing the logs to his house, splitting, and then stacking and it made the process much quicker and less back breaking of having to unload numerous truck loads of wood.
Mainly I don't want the mess right in front of our garage and driveway otherwise that would be a great solution.
@@digdrivediy that mess is basically kindling
I like your videos before I watch them. I am never disappointed!!
I am shocked the red medal isn’t completely destroyed on the barn.
I know what you mean. I don't want it all dented up but so far it's been minor.
Just came across your video, Gob bless you and your family ! Your family is amazing coming together like that to help. You don’t see that to often anymore.
Thanks 👍🏻
Great video, perfect narrative, thanks. Love the honesty.
I would suggest start to do 2 different wood piles, 1 pile for your "fresh" logs and let that one sit over the winter to season or wet stack as one of my cousins call it. The 2nd pile would be to cut/split/stack over the course of the summer (dry stack). Then you just have to alternate over the years. It's alot easier to get log pile done over the course of multiple weekends then it is over the course of a week. The added benefit of this is incase you run into a winter that's a little colder or runs a little longer then usual, you have a backup or plan B pile of wood.
P.S. Fun story, had a uncle of mine (r.i.p.) that ran 4 or 5 piles this way. 2 fresh/wet stacks, 1 or 2 cut/drying stacks and 1 split/burn stack (also dry). also helped that he ran his own logging company but that's a story for another day.
Time to build your own!
I think that would make a great video!!
Kleeman has a spare ram! 🤣
If you draw up some plans for me I'll start thinking about it. 😋
Being a city boy all my life, I have no clue why I found your video therapeutic and informative, but enjoyed it and learned so much.
That's great! Thanks for checking it out!
Great true to life video!!! I can say that based on experience. Having previously owned a firewood production business, I purchased a brand new Rapido Loco 60 made by CRD Metalworks (I do not think they are still in business and I sold my firewood business years ago). With its massive carbide tooth circular saw, it was absolutely amazing at how many cords per hour I could produce. In about 3-4 seconds, I could cut a round and split it into 12 pieces. It truly was a fun machine to run and more than paid for itself in time (they definitely ain't cheap!).
Absolutely everything in your video is spot on. From the time it takes to properly set up a processor to the constant little issues with rounds falling sideways into the spitting chamber to all the debris that accumulates on the body of the unit (do it for a living and you'd be glad at what little debris was left on your rental... LOL). It was nearly a full time job, when in full production, to keep everything cleaned out, especially under the conveyor belt so as not to cause premature belt wear.
I saw your very common issue with the last round not falling correctly into the chamber. I eventually figured out how to prevent this from happening. I would extend the ram a short distance and then slowly advance that last round/small log forward until it fell off and landed on top of the ram housing.The length of the last round dictated how far out I would extend the ram. Sometimes I'd extend the ram just slightly so that last round would fall off and land at an angle on top of the ram. I would then retract the ram either slowly or quickly (once again depending on the size and length of the round) and the log would fall off and pretty much land perfectly in the "cradle" every single time. That little trick saved A LOT of time in not having to man handle those bigger rounds and then having to get down into that chamber to mess with it just like you showed in your video.
One other last thing. After awhile, especially when working alone, I "wisened up" and learned to use the hydraulics of the machine to do all the hard work if a round got sideways in the chamber or something occurred that was just too much for me to handle alone (speaking of the weight of a larger round). I used a small chain with a circle hook to firmly cinch the round and I used a larger hook on the other end of the chain that I could hook to the one of the drive dogs that fed the logs forward. I would then REVERSE the powerful drive dog chain and it would pull that big ol' round back into place or position it wherever I chose.
Anyway..... Great video once again, hope these tips help you if you decide to rent again, and keep up the good work!! Take care.
Thanks! I appreciate the great comment!
Great video, Neil. Good thoughts on the Dyna Processor. I have watched other reviews on that same unit and everyone has the same complaint about how the logs drop after being cut. As you pointed out, manpower is definitely an issue when operating a machine like that. I have just a wood burning fire place and use it to supplement other heat sources. I have a 25 Ton County Line splitter that I got from TSC and it works well for me. My logs tend to be smaller than yours, and I am not splitting nearly as much. I am splitting Maple and Red Oak, mostly, and it goes through both relatively easily. One of the thing I like is the fast cycle time. Best I can tell is it has the fastest cycle time of the readily available units, at 11 seconds. Down side for me is the amount of handling of the wood that I have to do. Since I only burn 2-3 cords a season, it is not as much of an issue, and I try to do a little every week. I'm thinking you're going to want to look into a larger unit, as mine splits the logs a bit smaller than what it looks like you prefer to have.
Thanks for sharing Andy.
Do you mean that a Dyna 16 is too weak for an 8-way or 12-way knife (to get smaller pieces). You probably do not have an outdoor boiler. They normally use larger wood. Isn't 16 one size up from 14 (their smallest)?
I saw he was using a 6-way knife and possibly a 4-way knife. I would have liked to have him comment on the knife selection and take better pictures. He was focused on the way the logs dropped. Some processors have a device to make the logs drop properly.
@@jakebredthauer5100 I think the Dyna 16 is the biggest. I have an outdoor boiler as you can see at the end of this video. It will accept pieces as big as I can physically lift. I used the 4 way wedge for that reason. They have an option for finer splitting but I didn't take it with me. In my video from last year you can see the wedge a bit better.
@@digdrivediy Okay. Thanks. The variety of makers, models and features is mind boggling. The situation is so bad that one guy (in these comments) was taking advantage of the situation by telling us that the processor with the knife-blade that cut across the log was the best processor. What a scammer.
When the automobile was just getting going I think there was about 50 different manufacturers. They have been thinned down over time. The American manufactured firewood processors seem clunky to me compared with the European.
I think DYNA tries to promote renting.
I had a wood furnace for 14 years. I loved the heat I got from it, but as I got older it became a full time job and swallowed up most of my weekends to cut the wood.
6 min in on the video and i already love it haha awsome family you have yall are truly blessed and a big howdy here from texas 👌🏿
I'll never have to do anything like that but I found watching the process educational. Thanks for taking the time to document and present this.
Thanks!
Getting a wood boiler designed for 3ft or one meter firewood really helps to get the firewood processing times down by greatly reducing the number of cuts made. Also if the boiler is designed to be fed by a tractor or a loader also helps with the chore.
When you said "took something kind fun, and took the fun right out of it" my heart broke. I think we've all been in that situation but it's hard to hear.
Yep. Can be very true sometimes. Thanks for watching Alex!
I truly love people like you guys!! You guys will make it happen..👍
Thanks!
I’ve came across your channel and I’m very happy I did and also subscribed. Great videos you have. I split about 30 cords a year and all I have is a tractor supply log splitter. To feed the very hungry boiler. Being off in the summer time isn’t long enough. Keep up the great videos and keep your saw in the wood
Thank you Welder Man. Glad to have you watching. I like that "keep your saw in the wood"...
There is a skid steer attachment that is a processor. You pick the logs right up with it and run them through. Might be worth looking into as an alternative.
Outdoor with the Morgan’s got a nice firewood setup… looks quite efficient
Excellent objective details. Your crew set up was very efficient. Wonderful results. Thanks for sharing.
Great video. We installed a new Riteway #37 wood/coal heater in our basement the year after we built our house, (1982). No ductwork, just free standing. The bedrooms upstairs get a little cool, but we like it like that. We also have a fuel oil furnace. So we have been heating with wood for 40 years and I know the amount of work that goes into heating with wood. We have a 2,000 sq ft split level and burn between 2.5 and 5 chord a season. For the 1st time since I've owned the stove, I need to replace the cast iron shaker grates and fire bricks in the stove. It's been a good stove. We love the warm floors in the winter from the wood heater. Cheers from Akron, Ohio.
There are some good firewood splitters out there. No idea what your budget is, but something like a Wolf Ridge multi-head would allow you to make a lot of wood quick without help. If you have room to process logs in front of where you store your wood, them maybe a conveyor too to minimize handling. Great video, I just subscribed!
Thanks Doug! I appreciate the sub. I generally don't process and split wood right there just to keep down on the mess.
Hi Neal, the 11 cords you did in 8 hours is great production. Having the help that you did was awesome as well. The equipment to load logs and the trucks to haul to your house are essential to your production. Having logs without any limb nubs is critical for production . Pick and choose logs that will go through the trough nice and easy. By keeping the junk in a separate place for someone else to split on a different machine is a game changer. That chunky wood is a good way to repay people or friends that help you, as you can give them that wood and they can split it , toss it into your dump trailer for delivery. As for totes, when you stack 16 inch wood in them neatly, they hold exactly 1/3 of a cord. The upside is load them and move them out of your way, then put them in dry storage when you can. I used them for years to give a sure measure to customers come fall sales. I'm retired now, but cordwood is selling for $350 per cord these days. Do the math on your amount of wood that you need, but 11 cord is about $3350. Value. Figure out that you get paid to deliver wood to your farm, so that a big plus. I hope you can find something here from me that helps, any questions feel free. Scot from Hollis, New Hampshire.
Really appreciate it Scot. I've been burning wood here for 20 years, 15 of those with this wood boiler. I've tried it every which way so always looking for a new way to try. Thanks for watching!
First time visitor. Absolutely wonderful video with excellent editing, audio, (Your voice is a natural) great machine and processing views, explanations....really nice.
Thanks Kevin! I appreciate you checking it out and the nice comment.
We don't even have a fireplace anymore...but I still liked your video. You have a great family there that likes to help out. Keep working to perfect your efficiency!
Appreciate it Blaine.
Impressive! I really enjoyed this video thank you. Hope you kept warm!
I have a good solution for your wood concerns if you have a forklift or similar tool. Look up U-line part number H-1731. They are a wire mesh cage that is stackable and have a openable side and can fold flat when empty and still be stacked up to limit the space they take up. And being wire mesh they don’t hold on to water or snow and have a 4000 pound capacity each and can stack 4 high to a total capacity of 16,000 pounds per stack. They cost 250 a piece but I think they would streamline your operation a lot by being able to just feed directly and stack as it comes off the belt and just keep moving the crates until you run out of wood. Beyond that it may not be a bad deal to look into purchasing a similar unit to that processor. A used unit for sure and it may be a shiny penny to get it but could be worth while in the long term. You’ll be able to process logs out as you acquire them and devote less time overall to maintaining your wood supply.
I always enjoy your firewood videos. I don't think I'd like the stress of the rental either. We used to cut about 20 cord a year for every winter and we worked on it all through the summer. Cutting one day, splitting when you had a spare hour or spending a whole day doing some of everything. We had to take an old truck up into the woods and cut tree tops and dead falls. When unloading the truck we made sure to unload near the stack and split it right there. less foot steps at least. I'm sure you'll get tons of suggestions but ultimately you'll figure out what works best for you. On a side note, NY state is looking to outlaw wood boilers starting in October this year. We'll see if that gets passed into law though. I'm hoping not. Good luck next year!
Thanks Lee! Yeah, I'm trying all the time to figure out ways to "save steps" for sure. We'll see how it progresses I suppose. Thanks for the great comment and let's hope they don't outlaw the boilers just yet!
Love it! What an awesome family! Come together to give a hand anytime it's needed! ❤️
awsome video. I remember the days of heating with wood in Michigan. I am in Arizona now so no firewood needed. You're blessed to have the family and friends you have.
I am certainly thankful for all the family and friends for sure.
Best way to filter oil that you’re putting inside of a machine and make sure it’s gonna be clean and free of most of your particulate matter is actually a stack of coffee filters. It’s kind of surprising how effective they are
What an excellent video. Just loved how you introduced your wood crew and connections to them. You have a great team from start to finish. I run a similar crew of friends and family all manual and we use thanks giving long weekend here in Canada to put up the majority of our wood for the OWB. I also very much enjoyed your range of shots from drone to GoPro as well as the clear Audio.
Thanks a lot CCL. It sure is nice to have a good network of family and friends to draw upon and help each other out. Thanks for the kind words.
Thanks, very informative video. Never rented a processor before, but this gives me an idea of what to expect.
Watching the beginning of the video... it really does take a village. It's great when friends and family band together to help!
For sure!
Simply split your logs larger or even burn full rounds. Outdoor burners can usually handle pretty large logs. bigger the logs the less you use
Another great video Neil! Now I really really regret not being able to make it over to see it’ in operation! ! With your talents not only as an operator but your machine building ability I think either a end of arm cutter splitter or skid steer combo would work for you…. I’m not as good at keeping things neat and tidy as you but in my operation I cut out a few steps that you are doing. 1.) stacking. Are you doing that to conserve space? Other than that I see no benefit…2.). How big is your firebox? I cut mine to as big as I can handle that fit in my firebox they burn longer and saves handling time. Also I only split what I can’t handle or won’t fit through the door…. Just my industrial engineering take on the operation…in other words only do the operations that are required or ad value. Have a great week!
Take care my friend!
First video of yours that I have seen. Excellent editing and content. Good job, sir. I'm from New Hampshire and grew up preparing firewood for the long winters. It was a family affair, and the memories are some of my earliest recollections. I have open fire places as my sole source of heat these last 6 years. A splitting axe, wedge and hatchet are all I need to split enough for the mild winters here in GA. It's still a large amount of physical labor but I enjoy it and I've acquired some skill with an axe. There are those tricks that experience teaches which can reduce the man hours considerably. If the day comes that I find myself back in the north and needing upwards of 16-20 cords again I'll be looking to see what you try out for next years firewood needs. Thanks for the video and stay safe and warm!
Thanks for checking out the video Steven and I really appreciate the kind words. Hopefully I can get a little farther ahead for next year!
Firewood processor is a game changer I have a guy that rents his processor he runs the machine while I feed with a skid steer we can process about 11-12 cord in about 4-5 hours all piled in 3 big piles then we have to stack it over the next few days it’s awesome seeing the wood shed overflowing after we are done
Just a thought, maybe you’ve tried this… on the That Wood Guy channel, when he’s got say a 24” round that needs to be 16”, he does the 8” cut first, pulls it out and then feeds the remaining 16” down to the ram…
BASICALLY WHAT HE SAID HE WAS DOING
Seems like they could have designed the splitting trough a little less deep so that the logs going in for splitting don’t dive head first and end up straight up and down. If it wasn’t such a deep drop the logs may stay horizontal more often.
Nice video. My brother in-law burns wood in his workshop all winter in Minnesota. He uses the totes you showed near the end as he can store and move those easily. We cut and split with a 22ton splitter all day to fill 14 totes. As I watch your video, it shows the pre and post work you do.
As we split, we try to touch the wood only twice. Cut and split. Split wood goes directly into either a plastic tote or the wire frame. Separating the totes gives us two containers. We place the totes on pallets for ease of movement. Skillet
We use those bulk totes for all kinds of things around the farm take the tank out and use that as a cover for something that can't get wet and use the cage for fire wood to get it in the shop. Ratchet it to the forklift as a way to 'saferly' raise a man in the air, scrap wood\metal anything and everything! They are awesome!
Neil, if your looking for a splitter Eastonmade should be top of your list. My father and I own a Eastonmade and split about 30 face cords a year. It will easily split 2-3 face cords an hour. My experience of a good portion of my life splitting firewood for heat. Love the videos, keep them coming!
From What I seen there processor is good also.
what model eastonmade do you have? I personally have a 22-28 on order
I’m sure you have the lost time figured out already but when you mentioned logs dropping wrong or partially split, would it have been better to just keep feeding the processor and pick the missed logs out in the stacking process? You wouldn’t have to shut down production and prevent injuries digging into the machine. During 8 hours I don’t know how many times you had to shut down for a log. Just a thought I had but you still made a ton of wood.
Love it Kirk! I have actually spoken to Andrew Easton about a splitter and I think we have a few ideas in the works. Glad to hear all the positive reviews. Looks like they have top notch stuff! 👍🏻
@@lukeabendroth8157 Well, you have to move the log and straighten it to advance the splitter so when it falls wrong you're kinda forced to deal with it unfortunately.
I ran a tajfun 400 for a few years, I'd say it's slightly better but you tend to find similar issues in most machines
The way you said that it's the best cleanup you could do "for now" and after the weather conditions are clement for you to do a thorough job of it, allows for your friend to lend you the place for your use again if need be.
Great video… Always enjoy your videos.. 👍🏼👍🏼
depending on your sawdust output you might look into briquette formers to turn the waste into fuel
or use them in your smoker if it's all the same species of wood
Great job fixing the hydraulic leak. One bit of advice though, you might have used the wrong tool. Instead of a wrench, I've learned to use Knipex Cobra pliers on Tractor Time With Tim. ;)
🤔
There is a reason them style of pliers are named 'nut fuckers' they chew up fittings.
Wrenches are definitely the proper tool for the job. That being said, knipex do adjustable wrench that work similar to the knipex cobras - without chewing up the fitting.
I was thinking or doing this same thing and I am glad u watched your video cause I don't think I could run it as effectively as your crew did mostly by myself thanks for the video and information
Entertaining video for sure and an amazing machine. My dad used to help me cut wood on weekends when I was younger. He would run my homemade splitter which I built myself out of junkyard parts. It had a log lift to place about any size log on the I-beam, a dump truck hydraulic cyl. and a 4-way splitter. We called it the splitter from hell because no matter what you put on it, it would split it. I had a big old Wisconsin air-cooled engine on it to run the hydraulics an alternator and lights if you wanted to work late it had great lighting. My dad would sit on a tractor seat at the controls and loved to make it split all those huge elm logs. We split about every Saturday during the fall of the year didn't take long to make a cord of wood. I burned approx. 10 to 12 every winter.
That's awesome. Cool machine and great memories. Thanks for sharing and appreciate you watching!
I think someone makes a skid steer mounted wood processor too. You might want to look into this, it would reduce the amount of help needed.
The eastonmade 12-22 wood be a perfect fit for you.. its capable of splitting 5 facecord in under 2 hrs by yourself bucking by hand and stacking nice to make it easier is another 2 hrs.. at 15 cord your looking at 40 hrs or so a year.. not bad at all
I'd love to try one!
This made it harder for me this morning going outside to grab my maul and chain saw. I have been thinking of making a maul that is operated by remote control and the best feeder I can come up with is my dog picking up logs and depositing them on the splitter log. So far not working right, he is a great dog but still likes to chew the logs rather than process them. It was fun watching this!
Ordered a Firewood processor a while back, can't wait to see if I can run it efficiently like you guys!