Great video lad, but I myself I put the male tread of the old control arm into the female hole of the new arm bushing and as long as the bolt is straight, they will fit into each other to adjust enough to get you down to garage for new laser aliment, it's worth it to save on diesel and tyres.
But if a ticking sound at lower speeds I know injector one is down assuming it’s the first one on the left as you lift the bonnet / or oil level in gearbix
hey, if the smoke is white its probably regenerating the DPF cleaning it out they do that from time to time, if the DPF was blocked it would be in limp mode and unable to go over a certain speed.
Hello, Yes when its new i didn't need it i thought i would, but removing the old one i did need it as when the spanner turns on the nut the on the bolt the T40 stopped the bolt from from spinning and was important, not sure if we got that in the video but its needed on the old control arm.
Thank you so much it was been helpful video one of my rods snap off in half yesterday so now I know how to change it
Hi my friend it's your South Derry buddy here .Class video I love your vidoes boss hope all is good
Hey Buddy how are you, i hope good, all good here thank you, glad you enjoyed the video, was badly in need of doing but got all 4 corners done :)
Great video my friend
Thanks very much for sharing
Great video lad, but I myself I put the male tread of the old control arm into the female hole of the new arm bushing and as long as the bolt is straight, they will fit into each other to adjust enough to get you down to garage for new laser aliment, it's worth it to save on diesel and tyres.
But if a ticking sound at lower speeds I know injector one is down assuming it’s the first one on the left as you lift the bonnet / or oil level in gearbix
great guide, bolts replaced with new ones, please provide a link where you can buy new bolts
How you know the arm must be replaced? Thanks
Hello, the ball joint cover was leaking lubricant and was defective, had to be replaced for Government car test also. Thanks.
My T 27 d4d mk 3 estate is smoking can u help me Wats up - is it dpf blocked how do I fix
hey, if the smoke is white its probably regenerating the DPF cleaning it out they do that from time to time, if the DPF was blocked it would be in limp mode and unable to go over a certain speed.
@@cardiyrepair smoke starts of grey then turns white n blue never uses oil I change oil every 6k do I need to clean out dpf
Hi good job. ,nice video.
I got the same car.
Can I ask what Kind of android car stereo radio in your car please?
I got it in Aliexpress just go to www.aliexpress.com and look for andriod stereo for Toyota Avensis T27 and you will get them, Thanks for the comment.
Get a cheap blow torch as well as acetone and gear oil 50 50 mixture . Great substitute for wd40
Great point!
What was the purpose of T40 in this situation? Seemed like it didn't do much - or was there anything off-camera that didn't make the footage?
Hello, Yes when its new i didn't need it i thought i would, but removing the old one i did need it as when the spanner turns on the nut the on the bolt the T40 stopped the bolt from from spinning and was important, not sure if we got that in the video but its needed on the old control arm.