Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
Just bought a shapeoko xxl second hand, your videos in my opinion are some of the best for a beginner. I hope to get a first cut in the next few days.
Thank you lendley! I appreciate it! Welcome to the club!
Very clearly explained! Thanks for filling in some of the knowledge gaps I've had, but couldn't figure out how to solve. Fantastic!
Great instruction Edgar, no fancy annoying music. Keep this up love your channel 🇬🇧
Thank you Fridge. I appreciate the feedback!
NOW it's starting to make some sense. Thanks.
Thank you. It's starting to come together.
Really enjoy your videos and find them educational. You showed how to set up each of the Tool Paths except the Advanced V-Carve, it was just all of a sudden there and is the one that is the most complicated to set up. ???
Edgar, thanks for primer…a good review never hurts. Plus, you can’t tell ahead of time if you were able to scoop up a new CNC-er.
Thank you Tim!!
I’m liking carbide create.
It’s been great for me and for what I need to make. There are others that are better with more options but this has been fine for me.
I see, the v bit is used after the end mill bit.
For the advance v-carve, that one flat bottom v drill will do the whole sign?
Do you know what default Cnc settings are for a 3018 pro? I am a beginner.
Hey Iggy unfortunately I do not know those settings.
Thanks Edgar
Thank you Al
What part of California are you from?
As soon as you finished your intro the audio went out. Please check your video and correct the problem.
For some reason when I got on portrait mode on my phone volume is reduced but is fine when I’m in landscape. Try that. Thank you for the feedback.
Stereo
I know!!! 🤦🏻♂️ Idk what happened with this audio. Thanks for the feedback!
Just bought a shapeoko xxl second hand, your videos in my opinion are some of the best for a beginner. I hope to get a first cut in the next few days.
Thank you lendley! I appreciate it! Welcome to the club!
Very clearly explained! Thanks for filling in some of the knowledge gaps I've had, but couldn't figure out how to solve. Fantastic!
Great instruction Edgar, no fancy annoying music. Keep this up love your channel 🇬🇧
Thank you Fridge. I appreciate the feedback!
NOW it's starting to make some sense. Thanks.
Thank you. It's starting to come together.
Really enjoy your videos and find them educational. You showed how to set up each of the Tool Paths except the Advanced V-Carve, it was just all of a sudden there and is the one that is the most complicated to set up. ???
Edgar, thanks for primer…a good review never hurts. Plus, you can’t tell ahead of time if you were able to scoop up a new CNC-er.
Thank you Tim!!
I’m liking carbide create.
It’s been great for me and for what I need to make. There are others that are better with more options but this has been fine for me.
I see, the v bit is used after the end mill bit.
For the advance v-carve, that one flat bottom v drill will do the whole sign?
Do you know what default Cnc settings are for a 3018 pro? I am a beginner.
Hey Iggy unfortunately I do not know those settings.
Thanks Edgar
Thank you Al
What part of California are you from?
As soon as you finished your intro the audio went out. Please check your video and correct the problem.
For some reason when I got on portrait mode on my phone volume is reduced but is fine when I’m in landscape. Try that. Thank you for the feedback.
Stereo
I know!!! 🤦🏻♂️
Idk what happened with this audio. Thanks for the feedback!