Two Ways to Make a Faceplate for Bench Grinder (No Lathe)
Вставка
- Опубліковано 20 сер 2022
- Are you fed up with the beats and vibrations of your Bench Grinder? Fix your abrasive disc and make your own faceplate without turning to a turner!
CTL file for 3D printing - drive.google.com/drive/folder... - Навчання та стиль
How to fix the imbalance of the abrasive disc - ua-cam.com/video/F3fVgcvmex4/v-deo.html
SOMAFIX UNIVERSAL FAST ADHESIVE S667 - www.somafix.com.tr/SOMAFIX-UNIVERSAL-FAST-ADHESIVE-S667-EN.html
For 3D printing, I used 80% infill, but you can use 100% infill.
CTL file for 3D printing - drive.google.com/drive/folders/1HcqXlpWKajEJfYLzYJa9LxaPkfAn94Lm
We want to see your creativity in this topic electrostatic polarity detector
ua-cam.com/video/WptwVzK7cK0/v-deo.html
🥹
@@dhmevip2541 Sorry, uninteresting topic, it's yesterday.
@@grain8314 You are a genius person and with you everything seems easy, do not be surprised if I send you some clips that are not understood. Greetings to you
Nice use of 3d printer, not just making toys. Thanks for sharing.
Great idea to use the grinder shaft as a lathe.
This is a very simple and clever way of making an arbor for the grinding wheel grain. Job well done.
That is an incredible improvement!! Thanks for sharing grain!
The beauty of a well maintained and smooth running machine.
The bench grinder manufacturers could easily do something about this.
Good video- I need to come up with a solution-my grinder/disc is so out of balance that the
Grinder is trying to jump off the bench.
Thank you this is a great idea regards from mexico
Well done!
اشتقنا لك 💚
I like this
Nice ideas. Good result. Did you thin the shaft at the thicker end?
Is that metal outer washer loose or doesnt it also need to be corrected. And could you put masking tape or electrical tape on the shaft so that the washer fits tightly. Thanks for any help im new to this and just bought a bench grinder that vibrates like yours and i want to fix it.
Mist stones come with inserts. Lacking that wrap the shaft with electrical tape until you have a good fit. Done.
Using your bench grinder as a lathe - priceless.
Sir…can you help me. where oder washer and sheet…thanks so much
Now i want to balance everyone's grinders.
Ha. I'll bring mine over.
I don't know if it's a good idea but to get the washers to dimension you could also heat the shaft and then slide the plastic washers on, instead of filing it by hand
I think that is not the case in this case.
at waht speed do you turn and WHY do not make a vibrating test at end
jack 47 71
i cant find 150x12,7 abrasive disk. could you help me?
You probably already know this, but the most mortal sin you can commit on a bench grinder is using the side of the stone.
Спасибо!
Можно модельку для печати?
Ставьте заполение побольше, я ставил 80%. Ну и обрабатывать PLA хреново, он больше плавится, чем точится, а ровный всё равно не получается, я даже начала рядов в Cura назначал рандомно, всё равно бьет. Может быть ABS лучше обрабатывается, я пока с ним не работал.
drive.google.com/drive/folders/1HcqXlpWKajEJfYLzYJa9LxaPkfAn94Lm
❤❤
why don't they just make these for bench grinders rather than those stupid washers
I wouldn't trust a 3D printed PLA blank like that as the final form. 3D printed PLA is good if you use it as a Blank/Positive for making a mold of the part and then casting it is another substance after fixing all the flaws (all the print lines) by sanding, filling or so before using it to make a mold. And I sure wouldn't use it for any length of time on something that runs at 3k RPMs or more even if it is 100% infill.
If you have seen, abrasive discs are also sold with a plastic sleeve, and it is not even solid. And this is not caprolon or something from which gears are made. However, until I heard anything happen to such a hub, I myself have used such discs for many years. I think the reason is that there is not such a large load in the center, the loads increase towards the edges of the disk. By the way, they can increase by the central sleeve with an unbalanced disk.
Страсти вокруг точила №2 )
Еще какие! Сколько я видео смотрел - кто-то бумажки подкладывает в определенном месте, чтобы убрать торцевое, кто-то металл. крышку от банки с дыркой под гайку ставит, а внутрь кусок пластилина, чтобы убрать дисбаланс. О, господи! Самое смешное, что в Маките стоит такая же штампованная шайба, как в любом китайском. Зато лампочки, лупы понавесили. Руки бы оторвать этим проектировщикам.
Вот честно, ставлю обе планшайбы что сделал, на дешевый китайский станок, надеваю диски не глядя - абсолютно идеально крутятся без биений. А делов-то на пару часов - выкинуть родной диск с малой дыркой, купив с 32 мм и сделать планшайбы со втулкой одним целым. Ну, дисбаланс убрать - это для любого диска нужно, даже для войлочного.
Вот на Энхиле даже не всё так хорошо, хоть планшайба классная и я посадил обе на эпоксидку, и стокарил верх в 5 соток отклонений... НО! Втулка не цельная и уже всё - зависит как диск насадить, хоть небольшая, но есть разница. Поэтому идеально именно так - и планшайба, и втулка одним целым.
@@grain8314 Да, я понял суть, просто не всегда это нужно, хотя и приятно когда без дребезга крутится.
@@Sunktor Если топоры точить, то да, а если сверла и не на 15-20 мм или другие тонкие работы. И кстати, подшипшики так гораздоо дольше прослужат.
@@grain8314 Я сверла точу на тонком алмазном диске с маленьким мотором ДПР, иногда под микроскопом, если малые диаметры. Но в остальном конечно согласен.
@@Sunktor Давно про такое думаю для мелких работ, моторов небольших подкупил и б/у, и новых, но пока руки не доходят.
Stanislav, I would like to know if you are interested in reviewing TV antennas? I would like to get your contact information so I can share more details with you.
Feuilles aluminium
récupérée sur une barquette alimentaire (jetable, pour four).
Enroulées autour de l'axe.
Un peux mieux.
Yous shoulf print and sold on Am'azon...
Vive la Russie.
Hi! Bored Panda is an online arts and crafts magazine. We love your content and would like to feature some of it on our social media channels. What do you think? Could you tell your email or any other contact, please? So we can send you more information about our paid offer.
Hope to hear from you!