I assume you have the camber sorted by now but the alignment tech being lazy.. he needed to remove the shims from the upper arm to get it to zero.. I assume they were installed at some stage to add positive camber when it was lowered.
What leafsprings did you use? Im trying to lift my rears up but trying don’t have any luck for the rear springs. I have the same rear axel where the axel sits on the leafsprings. Please help thanks
Chur thanks bro appreciate it 💯 It's a TD27+T. I'm Running a CT12B Turbo off a 1kz, Factory turbo manifold with a custom 90 degree Sch bend to make it Top Mount. Custom 2.5 dump pipe and billit Oil drain etc.. Big front Mount with 2.5 alloy pipe and minimised silicone. Wound up full pump to match the TurboSmart boost tap on 18psi 🤟✊🏾 Hope that helps bro cheers 😎
@Dax reihana hey bro just wondering is it a mish to up the fuel pump? And slap boost tap on hahah Just scooped myself a d21 n the motors untouched td27+t running a ht12 turbo pretty much stock other Than that. But churr
Hey bro! It's a TD27+T. I'm Running a CT12B Turbo off a 1kz, Factory turbo manifold with a custom 90 degree Sch bend to make it Top Mount. Custom 2.5 dump pipe and billit Oil drain etc.. Big front Mount with 2.5 alloy pipe and minimised silicone. Wound up full pump to match the TurboSmart boost tap on 18psi 🤟✊🏾 Hope that helps bro cheers 😎
I build custom 4” lift spindles for Nissan hardbodys 2wd and Toyota pick up 2wd everything bolts onto factory suspension and don’t need to tighten torsion bars as that will give you a terrible ride quality and max out ball joint angle check out @customtubeworks
Hey bro! It's a TD27+T. I'm Running a CT12B Turbo off a 1kz, Factory turbo manifold with a custom 90 degree Sch bend to make it Top Mount. Custom 2.5 dump pipe and billit Oil drain etc.. Big front Mount with 2.5 alloy pipe and minimised silicone. Wound up full pump to match the TurboSmart boost tap on 18psi 🤟✊🏾 Hope that helps bro cheers 😎
That extended cab is sick!! Love it.
Cheers thanks bro!
Just need the ol garden liner overfenders hahah
Sounds sick as bro, got an update on the nav coming surellyy?
Looks sick!
Are terranos alright with fuel?
is there a difference if you put the springs over the axle?
Wish they shipped these to America I love it
Cheers thanks bro! This is in New Zealand 🌏
Dope bro!
What lift kit are you using and tyre size??
Dope editing bro vids dope
Thanks bro appreciate the support! 💯🤟✊🏾
subscribed to u mate, fuckn love the TD27t
Cheers man appreciate it! 💯🤙
I assume you have the camber sorted by now but the alignment tech being lazy.. he needed to remove the shims from the upper arm to get it to zero.. I assume they were installed at some stage to add positive camber when it was lowered.
What leafsprings did you use? Im trying to lift my rears up but trying don’t have any luck for the rear springs. I have the same rear axel where the axel sits on the leafsprings. Please help thanks
Hey man I just used Factory leaf springs that weren’t flipped
did you put turbo on your td7?
Did you change your UCA already??
Mean vid brother just wondering what you've done to your motor cos arrhhhh that sounds and goes pretty fuckin solid 🤙
Chur thanks bro appreciate it 💯 It's a TD27+T. I'm Running a CT12B Turbo off a 1kz, Factory turbo manifold with a custom 90 degree Sch bend to make it Top Mount. Custom 2.5 dump pipe and billit Oil drain etc.. Big front Mount with 2.5 alloy pipe and minimised silicone. Wound up full pump to match the TurboSmart boost tap on 18psi 🤟✊🏾 Hope that helps bro cheers 😎
@@DaxReihana-RFB churrrrr thank you bro mean 💪🏿
@Dax reihana hey bro just wondering is it a mish to up the fuel pump? And slap boost tap on hahah Just scooped myself a d21 n the motors untouched td27+t running a ht12 turbo pretty much stock other Than that. But churr
Japtec mafia🇯🇵💯👌😎from south africa ☝️
Cheers thanks man! 💯✊
That’s tough bro
Churr shot mbro! 💯🤟
Dirty fkn spoool bruv
Churr shot bro cheers!
can we plz see that engine bay 😤😭
What manifold are you using bro
Factory Turbo manifold bro, used a Sch 40 bend to make it look like a Top Mount
Engine bay pics and what mods
What’s done to the engine bro, just picked up my first td27 wanting to make some power
Sounds like a ht12 turbo from the d22 nav, had one on my old girl and bro it goes hard would definitely recommend
Hey bro! It's a TD27+T. I'm Running a CT12B Turbo off a 1kz, Factory turbo manifold with a custom 90 degree Sch bend to make it Top Mount. Custom 2.5 dump pipe and billit Oil drain etc.. Big front Mount with 2.5 alloy pipe and minimised silicone. Wound up full pump to match the TurboSmart boost tap on 18psi 🤟✊🏾 Hope that helps bro cheers 😎
That's dope dude you running 18psi on the stock block or have ya built it?
@@chuckmcmushroom5586 Cheers man! 💯 Yeah bro on stock block ✊🏾😎
What tire size did you use?
235 75 R15 A/T
Hahaha golden bax allfayyy boiii yu kno😹😹🤙🤙🤙🤙
Cheers man! 🤙
Chur g is it turbo dump pipe ?
Chur bro yeah 2.5 custom dump pipe.
I build custom 4” lift spindles for Nissan hardbodys 2wd and Toyota pick up 2wd everything bolts onto factory suspension and don’t need to tighten torsion bars as that will give you a terrible ride quality and max out ball joint angle check out @customtubeworks
broo tell us about the engine modifications. damn
Hey bro! It's a TD27+T. I'm Running a CT12B Turbo off a 1kz, Factory turbo manifold with a custom 90 degree Sch bend to make it Top Mount. Custom 2.5 dump pipe and billit Oil drain etc.. Big front Mount with 2.5 alloy pipe and minimised silicone. Wound up full pump to match the TurboSmart boost tap on 18psi 🤟✊🏾 Hope that helps bro cheers 😎
@@DaxReihana-RFB damn love it!!
chuuuuuuuurrrrrrrrr
Who do u install the blowoff???
I had one td27 turbo too in my d21 doublecab
Hey bro i dont run a bov, That noise is just coming from the 3 inch alloy intake with a pod filter at the end.
Hey bro I got your nav now it’s got a blown head 😂
Which country is this
New Zealand bro
Dax Reihana one big family 🙏🙏
Psi ? Mines running 20
17 bro, Chur minta 🤙
Holy cranky...your steering wheel is on the wrong side AND you're driving on the wrong side of the road. Wait...is this Tennessee?
This is in New Zealand bro haha
Could’ve given it a clean bro hahaha nah mean as.
Hahah next video bro 😅 Shot bro cheers 💯🤟
Chur bro do you live in kerikeri