Lovve ur channel Bro!! Just finished putting the kemimoto lower panels on my 2021 X3 max XRs RR & Ur video helped A LOT!! I didn't feel comfortable drilling out both rivets so I just did the middle 1 by the latch. ( wish you would have done more detail about how you put it back together after drilling out the rivets) With just the one rivet drilled out I was able to fish my hand back there & help guide the bolt down into the hole. The other thing I did that you didn't was drill a 1.25" hole right by that Middle Screw (As an access hole) to help me fish that bolt down thru. Was able to buy 1.25" plastic plugs off Amazon to cover the hole I drilled and it looks pretty clean. Did you just use sheet metal screws to cover the holes left by the drilled out Rivets?
Hi Franky! How do you keep you’re plastics shining . Mine are dulling up really bad and I am using a microfiber towel and they are not getting any better the more I try to shine them. Thanks
This is the link.. but it does not fit perfectly.. its overlaid over the top and uses a velcro strap. If u need a closer look.. dm me on instagram JMTAAT Dark Tint Tinted Half... www.amazon.com/dp/B0856VNFBJ?ref=ppx_pop_mob_ap_share
Here is the link. It doesnt perfectly fit over it.. its attached via velcro straps www.kemimoto.com/collections/can-am-maverick-x3-parts/products/4pcs-lower-doors-panels-kit-for-can-am-maverick-x3-max-715003751-front-rear
They changed their mind on when it ended🤦. i was informed they will have another code for black friday. So if ur eyeing some parts. Keep an eye for black friday
Thanks for the hook up.I just installed these and ready for Thanksgiving in Glamis💪
Nice bro👍👍👍
CJ and Timmy are some ballers
Tell me about.. two vids of more stuff we installed coming this week..lmao
Lovve ur channel Bro!!
Just finished putting the kemimoto lower panels on my 2021 X3 max XRs RR & Ur video helped A LOT!!
I didn't feel comfortable drilling out both rivets so I just did the middle 1 by the latch. ( wish you would have done more detail about how you put it back together after drilling out the rivets)
With just the one rivet drilled out I was able to fish my hand back there & help guide the bolt down into the hole.
The other thing I did that you didn't was drill a 1.25" hole right by that Middle Screw (As an access hole) to help me fish that bolt down thru.
Was able to buy 1.25" plastic plugs off Amazon to cover the hole I drilled and it looks pretty clean.
Did you just use sheet metal screws to cover the holes left by the drilled out Rivets?
I reinstalled rivets where we drilled them out, ive been advising to just use plastic push pins instead. The kind u find at auto parts store
@@GLifeUTV Thanks Man
Will this fit a 2021 ds model?
Yea
Thanks for the response
Hey bro, so after you take rivets off, do you lose that plastic piece you take off? Or how do you put it back on?
Sorry bro.. yes we put on new rivets.. u can also just use a corse screw that is slightly larger then the whole
@@GLifeUTV thank you bro!
Hi Franky! How do you keep you’re plastics shining . Mine are dulling up really bad and I am using a microfiber towel and they are not getting any better the more I try to shine them. Thanks
Shine supply product called clutch
ua-cam.com/video/yCllGC2R080/v-deo.html
Thank you Franky! I will try that Clutch out! Awesome!
Hey bro! How long are the bolts? We accidentally threw away the hardware. Let me know.
Sorry. Its been awhile since we done this.. idk
Discount code?
Hey franky. What motor oil weight do you recommend for first oil change? For a 2020 RR. Also synthetic or non synthetic. TIA
This is the kit i put in my car. For hotter climates like Cali www.amazon.com/dp/B07F2PRBGS/ref=cm_sw_r_cp_apa_fabc_rkVRFbCHKV2JW?_encoding=UTF8&psc=1
So you have a link to the windshield? I bought an intrusion bar but had to take off my windshield. Did not fit
This is the link.. but it does not fit perfectly.. its overlaid over the top and uses a velcro strap. If u need a closer look.. dm me on instagram JMTAAT Dark Tint Tinted Half... www.amazon.com/dp/B0856VNFBJ?ref=ppx_pop_mob_ap_share
So when you add lower doors or full doors to Rzr’s you have a lot more cab heat is this the same on can ams?
Yea, you can feel some more heat radiate from the center tunnel, not sure how it compares to a rzr tho
It’s actually hotter in a Can Am.
Where did you find the pop rivets to reinstall the latch plastic guard?
Autozone
Super awsome thanks for vid. Does it have heater?
Cabin Heater? No it does not
Where did you get the rivets to replace the ones you drilled out
Hardware store.. or go get some plastic push pins from autozone
What size rivets did you use to put back the covers? 3/16?
3/16 will do the job
@@GLifeUTV thank you!
How long did it take for them to ship them??? I ordered mine about a week ago and they haven’t even shipped them
About a week bro.
Good stuff man! You recommend these lower doors over the aluminum ones?
For the lower halfs yes.. cuz they dont rattle.. if ultimately you wan't full aluminum doors.. tmw is the way to go
How are they holding up Frank? My car is coming in March and these are half off brp!
They are holding up great. Car was rolled. Upper half of doors on one side were damaged.. lower halfs still perfect.
They are 6.5 with different longer tower pods
What window is that. Was looking for one to fit over intrusion bars
Here is the link. It doesnt perfectly fit over it.. its attached via velcro straps
www.kemimoto.com/collections/can-am-maverick-x3-parts/products/4pcs-lower-doors-panels-kit-for-can-am-maverick-x3-max-715003751-front-rear
@@GLifeUTV I think you sent me the link for the doors. I was hoping to get the link for the front window
@@MrCarpediempilot my bad... Here it is www.amazon.com/dp/B0856VNFBJ?ref=ppx_pop_mob_ap_share
What did you do for the ribbet s
U can use rivets like we did or plastic push pins
Is the TMW code a pipe dream now? 🙁
They changed their mind on when it ended🤦. i was informed they will have another code for black friday. So if ur eyeing some parts. Keep an eye for black friday
@@GLifeUTV i figured lol. too many people probably used it haha
Where is the link I want those lower doors 🧐
www.kemimoto.com/collections/can-am-maverick-x3-parts/products/4pcs-lower-doors-panels-kit-for-can-am-maverick-x3-max-715003751-front-rear
FrankGLife thank you is these fit in 2021 canam x3 turbo rr ?
@@karenkjtips the car in the video is a 2021 turbo rr. So yea
FrankGLife thank you 😊 👍🏻
I have the same hat lol
🏆🏆🏆👍🇺🇲🙏
Thank you for sharing
👍👍🤟
Wait wait wait...Whos this guy....Same voice...Other FrankG had a beard...what happen to him!!! Lol xD
Thats frankG lil cousin🤣🤣🤣🤣 trimming the hedges went wrong.. had to scorth the earth.
@@GLifeUTV Haha!!!
Honestly they aren’t the best. We have the same doors and the doors dropped because of the heavy weight
They shouldnt drop.. oem are the same. I feel they are definitely good for the price
U got the cholo accent
Hahah