Це відео не доступне.
Перепрошуємо.
Homemade water ionizer getting 10.2 ph reading
Вставка
- Опубліковано 29 січ 2017
- Titanium rods are used but no sponge or minerals are used in the system other then a little sea salt. The plastic tanks are bpa free but I have no idea about the valve that connects the tanks. So the final product on the negative side is also ran thru a water purifier. The batteries will eventually be replaced with a variable power supply. Next test is 48 volts and so on, to see how high up I can get on the ph scale.
I recently made another video on this set up, reviewing the out put water under a microscope. Here is part 2: ua-cam.com/video/a2mUCSClWzQ/v-deo.html
Neat! I’m thinking maybe replace the commercial batteries for solar powered power as the main electric source?
Great build!
The model. Helped alot.
I'm now using two kitchen spoons with 24 volt (two 12V DC adapters connected in series).
But here's a catch I noticed,
With two 12V Dc adapters connected in series and correctly connected the positive and negative terminals to anode & cathode respectively gives me alkaline water at Positive terminal End. But your model gives it at the negative side.
Also, I bought a 12V 10A SMPS from market and connected it in the same manner,
It gives me alkaline water into the negative side which is as you said.
I didn't understand why is there's been a difference in both the cases.
Any hints please?
I think we both realize your case doesn't make any sense..........never heard of that before and if you used a volt meter to verify polarity was reverse that would even be more puzzling. I can't physically check it out myself of course to know what's going on but I would just use a 24 volt adapter. Keep in mind the higher the voltage, the more the electrode will break down.
@@Lightendogyou're correct. That could be the solution to the problem, instead of adapters in series I'll buy a single source of supply.
About the last line that you said, the electrodes would break down with higher voltage, I tried to avoid that by reducing supply from 24 volts to 12V. but even with a 12V 10A supply, that took a lot of time, more than 30 hours for 4+4 litres of water in both tanks.
With a 24V 1.5 A max supply it took not more than 24 hours.
I'm planning to buy the platinized titanium electrodes to avoid the breakdown issue.
But the time the process is taking a lot.
@@mehulgandhi8 When I was looking into alkaline water years ago there was so many pros and cons, back and fourth I decided to take a look at what is natural in the world. Rain water is sometimes pretty clean even thou I've tested as much as 020 ppm. It's ph level is around 7.6 which is the most natural so I only drink distilled water now, been for years. Not the kind from the store thou, I have a distiller and I usually get a reading of 002 on the ppm test. Tap water is 160 ppm here and even some bottled water is the same. Purified bottled water tested 006 which is the best I could find in a bottled water. As they say, all things in moderation and sometimes you just got to go right down the middle for the safest bet.
Wait you can safely connect to 12 V laptop chargers in series and it doesn't blow one of them up? Can you do that to 3 Or 4?
its process of electrolize in industry and release oxygen and hydrogen . i am not oppose of your device and i believe alkhalin water is good for heath . but there is chemical reaction between water and metal bars. maybe carbon grafit is beter.
English please, and thanks.
Can you post a video on how you assembled this machine
if you put hho gas in one of your tanks, do you think the speed in producing acidic and ionized water can improve?
So is this process done through electrolysis? The same setup like you would making hydrogen?
How did you get 8.4ph tap water? Most suburban water supply is way below 7? And full of chlorine!
Peter
Thanks for video. However in light of all the knowledge of the danders and negative effects of plastic , what good does it do to make alkaline water in plastic jugs??? Fabricated alkaline water isnt as goid for you as people think. Also the body needs acidity. In our urine, intestines, stomach. Thats how microbes our killed, we dont want to neutralize that
What if you set water to a PH of 10 by this setup. And lower it down with lemon juice and minerals. Could that than better
I have a mega question. I followed other guides before yours and of course I didn't find Yours until I finished.
And it would be great if anyone could help me.
I made the setup but I didn't use your power source I used were to the other one used and that was a phone charger connected to A USB wire.
According to other videos you need DC electric to create this machine.
How are you doing it with car batteries when that's AC.
Second how do you create 50 V in A DC environment.
Third on my bill the positive note seems to create this white stuff. I think it's because of the copper I used to bound up my titanium washers. But that's another question because my washers are small as hell and you have 2 huge stainless steel bolts
Also I've had mine running for a few days now I can only assume that it's been ironized the water didn't change color and I can't get past a 9.0 on ph.
After watching this video I've come to understand that the vaults regulate the ph level.
Can anyone supply a graph as to how that would work.
A car battery is DC current, anything from a wall is AC current however usb ports that come out of the wall convert the AC voltage to DC as most all usb ports use 5 volts DC. The higher the voltage the quicker the process but then you will also get break down the the positive rod. Now, to be clear, I don't drink this kind of water. I bought an electric distiller.
@@Lightendog how do you get higher ph? Watts, volts?
I was looking for a ionizer and high ph.
The copper appears to be leaving a white residue. the titanium is expensive , so I'll probably switch to stainless.
I was going to filter with a brita.
Test, get a PPM/TDS reading/results.
I use distilled water only now.......wish I would have tested it with a ppm meter but I didn't have one at the time (as far as I remember). I can tell you when I distill water the ppm reads 001 usually. Rain water is 000 to 020 and my tap water is about 150 ppm. I've tested some well water at over 300 ppm. Only purified bottled water tested very low at 007. Most of the other bottled water was the same as tap water.
From what I research once you ionized the water the fluoride and chlorine will separate itself from the water and evaporate as a gas
Interesting and I'll say I never heard that before but maybe it does. If you google how to remove fluoride from water, ionization is not one of the methods from what I remember. I distill my water and usually get 001 ppm on the meter.
What did you use for electrodes
Titanium rods, bought them off ebay
Hi there Lightendog. I've just come across your video. I have a 60v 5A digital power controller, called a korad.
I'm wondering whether it's possible to use it to create a system like this. thanks for the video. I'll keep looking into it.
I use the power controller together with a magnetic stirring hotplate and produce colloidal silver. I'm just seeing what else I can do with it.
You could use it for this type of setup however the higher the voltage, the more one of the rods will break down. This is why I stopped using this along with mixed results weather or not alkaline water is even better for you. I now just use a 5 stage water filter.
Seems the PH's meter readings are off. Chinese didn't calibrated it properly. Should be a whole point lower.
Very nice brother! I’m going to do the same setup you got there!!! Any advice?
I don't use this setup anymore as there are mixed opinions on whether or not it's good for you. Now I run all my water thru a 5 stage purifier and I also drink distilled water to remove toxins. On this set up here I did notice one of the metal rods was getting corrosion marks so you have to wonder where the metal particles were going. If you still do want to do this, my advice would be you use a lower voltage then I used. It will take longer but won't break down the titanium rod like the higher voltage does. Honestly, I would just run everything thru the 5 stage filter system....it's 10 times less hassle and there are no questions about weather or not it's healthy.
Can you tell us more about how to get a five step filtration system? What brand? Or how to build one.
You should use Himalayan pink salt instead of iodized salt
Great job. How are you feeling using the water?
I feel fine but I don't make that water anymore......too much of a pain plus there are too many comments going back and forth on if it's good for you or not. LOL, who knows what to believe anymore these days with all the wrong info out there. I have been using a 5 stage water filter / purifier and sometimes I'll drink distilled water. For about 9 months now I only give my dogs the purified water and I notice a change in my female German Shepherd. She only had soft hair as a puppy and then her hair got course, like petting a porcupine, lol. After shedding her coat last fall, it came back soft again......and she's turning 4 this summer. Strange on how that happened but who knows, maybe the filtered water really can make a noticeable difference.
@@Lightendog Very interesting observation. Good job. I only wished you could show us how to make this. I saw a video posted years ago, but can't find it now, but I am in a new location with the means available to make it with no tutoring.
@@mmalon2908 My very last video shows my distilled water setup.......I only drink distilled water now but I will take salt also for an electrolyte. I use a small electric unit that makes 1 gallon in 4 hours. I'll save my jumbo setup for times of not having power. The ionized water system I noticed was breaking down the titanium rod so if you're going to do this, keep the voltage 12 volts or under......which simply means it will take a little longer to complete. Where are you located? Maybe I could ship this set up to you.
Very interesting, cant wait for an update if you talk to martijin room
It is interesting as when you look into this stuff you get all kinds of info on how good this is and then info on how bad this is, lol. Well someone is full of crap and it's so hard to tell who to believe. I can understand companies putting out bs to make a buck but not all are crooks.
yeah I hear ya, I believe in the more ph is best. keep us updated after you have been drinking for a while. Later
Have you heard a lemon water helps with heart burn as it adds more acid to a low acidic stomach....After hearing it explained fully it makes sense so who the hell knows for sure. I can tell you this much for sure, if you don't hear from me again.........DON"T drink the water, lol.
I have heard that but always forget to try it lol.
To tell you the truth I use to get caught up in the good vs bad thing a lot. Oh and the whole doomsday thing to. Then I ran into some spiritual stuff and ect... Long story short is trying to change core beliefs, the beliefs that make you, you. You and only you can decide what is truth and not truth and that is the only thing that matters. If you can change those beliefs then everything starts to change. Then the dirtiest water to others can be good for you because deep down core beliefs says so. Or mind over matter for another term. Its tuff to change those. Thats what Im in the process of doing
I made the same setup but somehow the current is not flowing. I was using RO water so added salts to up the tds by 350 ppm. But still no luck...anybody help .. I am using 16V supply with ability to provide upto 8 amps of direct current
What is RO water? 16 volts should work fine but would take a whole day. As long as you see some small bubbles on one of the probes it should be working as long as nothing is blocking the water between the two tanks. Before draining you need to be able to isolate the two tanks (you probably have that). Read some of my replies as I have explained I do NOT use this setup for drinking water. Distilled I believe is the best.
How many amps are you applying along with 36 volts
This video was made 5 years ago.........I never checked the amps.......whatever the batteries gave her, Idk. I don't even drink this kind of water as there is too much back and forth to know for sure. Rain water is natural and has a ph of about 7 and can be as clean is 000 and as dirty as 020 on the ppm meter. Distilled is the closest to rain water and I always get either 000 or 001 parts per million when I make it.
What type of electrodes are you 7sing?
Medical grade Titanium rods
@@Lightendog thank you. Where can I order? I can not find medical type in Amazon.
@@princessa4223 I found mine on ebay
@@Lightendog thank you
You have 8.3 out of your tap??? Ours is a 3.00
Anything out the tap is crap no matter what it reads. I don't use this setup but I have been distilling my water for over 3 years now. My water reads 001 ppm (parts per million) and tap reads 156 ppm currently. Rain water tests ranged from 000 to 020 depending on how much chemicals they spray. Distilled water is about 7 ph which is probably the safest bet. Your body will regulate it's own ph level. Too much back and fourth on that topic so who knows what's good info anymore these days........
This is unhealthier than just plain tap water...
You might be right.....I don't drink it. Been drinking distilled water for over a year now.
@@Lightendog Please just drink tap water, its tightly controlled and contains all you need.
Distilled water lacks important minerals. You might get some of those back from milk products but tap water would definitely better. Distilled water is not meant for drinking.
@@drkastenbrot Tap water has plenty of fluoride and Lord knows what so no thanks.....think about this for a minute: I've tested different kinds of water using a ppm meter and the results are, tap water 167, different well water between 180 and 300, purified water at 006, and rain water I took about 30 samples resulting between 000 and 020 ppm. The amount of minerals you pick up in water might only be in the 25 ppm range which is nothing you can't get in vegetables. I have a friend who was in the service and while out at he told me they made their own water by distilling it. Rain water is basically the same process so to say it's not meant to drink is propaganda bs to keep us on fluoride tap water which causes neurological disorders. Fluoride is a toxic poison and they know it too. Animals drink rain water, nature uses rain water so if you think it's not mean to drink, then stay on the poison water that comes out of the tap. Look at Flint Michigan.....do you think they only used lead pipes there? They used them everywhere. Just do a little research into this or at least drink purified water.
@@Lightendog Flouride is not neurologically active, it only affects bones and teeth. Too much flouride will cause problems with both, however the amount in tap water is nowhere close to that, you can drink tap water and use flouride toothpaste safely at the same time.
Lead pipes are very common and they can become dangerous if the mineral content of the water drops. This is why mineral content of tap water is constantly monitored and controlled, and as a side effect it provides healthier water.
Making a observation with a ppm meter without understanding how it works is pure speculation. Even just rust from pipes, which is harmless and common in older buildings will massively raise the reading.
While rain water and distilled water are not immediately unhealthy to drink, combined with a bad diet they will quickly lead to a mineral deficit.
@@drkastenbrot Read the warning label on tooth paste if swallowed and it affects more than bones and teeth. It causes dementia and has NEVER been proven to prevent tooth decay. A ten year study was done on both fluoridated and non-fluoridated kids which should no difference in tooth decay at all. Some countries don't even put it in their water but here in the US, we're being medicated without our consent. Fluoride is a poison period, and we should not be drinking it. I've seen two documentaries on the subject and it's not just in the tap water, it's in soda and other products too. Again, the amount of minerals you get from water is insignificant and there are many people who don't even drink water on a regular basis. You can find all the info on this online.
Pulse the voltage
Whats the final ppm after filtering
Not sure if you read my last post on this, but I believe you might have. I no longer use this set up and just drink filtered water thru a 5 stage purifier and sometimes distilled water. Because it's been so long now, I don't recall any test results on the current water. My interest in this was very short with the variety of opinions on what's best for drinking. Water that is close to bleach can't be that good for you and neither is the stuff coming out of the faucet. I have 3 dogs and my female German Shepherd only had soft hair as a puppy, then turned very course. She was 3 years old and it was like petting a porcupine, lol. She's 4 now but over a year ago I started giving the dogs only filtered water and after 6 months, my female Shepherds hair became soft again, not like a puppy, but it's a big difference.
Thanks for info, I don't drink my own electrolised water I just do it for experimentation although I do think its better than tap water as when I run it through a brita the ppm is around 150 which is half of what my tap water is but I wouldn't drink it unless I could get it to near zero like distilled water.
Lol it can be a better marx generator, because of water ionizer effects 🤣
I'm sure that you're aware of all the plastic that you have there what you ionize of water you ionize in the plastic to you don't think it's leaching into the water
I'm sure it does however I don't drink this type of water. Been drinking home distilled for years now.
I'm sure it does however I don't drink this type of water. Been drinking home distilled for years now.
I watch your video, Homemade water ionizer getting 10.2 ph reading could you do one for me about ordering for brazil or send out project step by step how to mount
I don't use this setup anymore as there are mixed opinions on whether or not it's good for you. Now I run all my water thru a 5 stage purifier and I also drink distilled water to remove toxins. On this set up here I did notice one of the metal rods was getting corrosion marks so you have to wonder where the metal particles were going.......
You could help one understand more about the best water to drink what material should I buy
Sorry, I'm not the right person to be asking this question as I'm no expert on the matter. There are however plenty of videos to watch on the matter.
10 pH is too much for water!it should be around 7
Depends how close bleach you want to make it.
Lightendog do u want to commint suicide?
It won't kill you......it didn't kill me but I don't drink that water and I don't even make it anymore. Read some comments below and you'll hear about why I don't drink it.
BTW as long as you're look thru my videos....check my last one on the Faraday Cage bed enclosure.........
Don´t drink and make videos