Hi guys, thanks for watching 😋 Download the base scene here → members.archvizartist.com/youtube-156-interior-vray6, also check out our new Interior Design Course → archvizartist.com/course-interior-design/ if you are interested 😀
Voluntarily putting a window behind the camera or creating a camera so that the main source of light is behind it is a no no. Always looks like 2am front flash drunk selfie. Always keep the source of light 90 degree from the camera if possible.
Hi Ava, I enjoy your tutorials very much; they are very well explained and comprehensive. I have a 2022 3DS Max, but I can’t open the base scene. It says the file was saved in a newer version. Is it possible to save the file in an older version? Thank you!
Hi AVA, I like very much your content. I was wondering if is there any chance of getting the LUTs you usually use during the postproduction phase. Thank you very much.
Hi Ava, I enjoy your tutorials very much; they are very well explained and comprehensive. My 2022 3DS Max can’t open the base scene. It says the file was saved in a newer version. Is it possible to save the file in an older version? Thank you
At what point does lens shift to get parallel verticals become too much, and a regular camera preferred? I had a job recently where camera was on the 2nd floor looking down the 1st floor at a pretty steep angle (30-45 tilt?). Was about 4 meters between each floor slab level, and due to the nature of what we do (15m wide by 5-6m tall "TV" in this case) we always work with very wide angles (12-18mm usually, 24-30mm are rare). Trying to "look down using lens shift" just made it ugly and weird, and I ended up living with converging verticals as a lesser evil. But I'm not sure if "when it looks weird to the artist" is a good metric; quite often when there are things I do (I'm not professionally into "arch viz" as such, but we place our equipment into spaces and render for illustration) think look bad or ugly, it's because I *KNOW* the mistakes are there, but the customer will never spot it. Any rules of thumbs in professional arch viz regarding when and when not to use lens shift to get parallel verticals?
Excellent episode. I hear some humm.. sound is there AC that mic capture, sometimes I have isolate that kind of sounds from video and remove them later..
Hello i tried getting the base file few different times but the file was unable to be received in the mail can you please check and update it or a direct link would be better btw loved your videos
Hi, I would like to apply the tutorial concepts, but the File version is for 3ds Max 2023. Could you have the version for 3ds Max 2022? A thousand thanks!!!
Hey Ava! How are you? I've been watching your videos from time to time over the past few years and must say that you seem to know your stuff. I was wondering if you can help. This has little to do with the video I am responding to, but since it's your most recent video you are more likely to respond. This is a very simple question, which might have an easy answer, in which case thanks in advance. If the answer is complex thanks too. How do you link a screen projected environment map's rotation setting (W) angle with a moving object in a scene, like say a box, or a sphere? The challenge is to have the angle change to point at the object wherever it moves to on the screen.
D5 is really good. I just found it and it’s amazing. Also free for 3ds max, blender, cinema 4D etc. I just cant figure out the renderer in max. It’s too expensive.. too
In the post production good monitor is needed right? Becz I used old laptop and set lighting then i check same image in different monitors it looks so dim
glad I found this channel !
Hi Aga, many many thanks for this amazing tutorial. I have learned a lot seeing your videos
I really appreciate you.your are share a good knowledge. I take lot of knowledge form your video.
I appreciate that!
ربنا يبارك ليكم و يزيدكم علم والله
Hi guys, thanks for watching 😋
Download the base scene here → members.archvizartist.com/youtube-156-interior-vray6,
also check out our new Interior Design Course → archvizartist.com/course-interior-design/ if you are interested 😀
Amazing as always
Thank you! Cheers!
Hey AVA, great tut as always. Thank you.
Glad you liked it!
Im following always
amazing and help full video ❤❤❤❤❤❤
Thanks 🤗
I am very happy watching your videos, thank you !!! )
how amazing you are
thank you very much very nice
Its perfect👌
Hello Aga, could you show how to make the texture cuts for the wooden floor? Excellent videos as always
Thank you 🌹🌹
You’re welcome 😊
Amazing loved it
Can you make tutorials or suggest video about quixel megascan how to install and how to use it
Voluntarily putting a window behind the camera or creating a camera so that the main source of light is behind it is a no no. Always looks like 2am front flash drunk selfie. Always keep the source of light 90 degree from the camera if possible.
First of all, the explanation is excellent. And Can you make a video explaining to us how to make an amazing shot, please, in 3d max?
Thank you, the whole tutorial is about that though :)
@@ArchVizArtist it feels incomplete
Hi Ava, I enjoy your tutorials very much; they are very well explained and comprehensive.
I have a 2022 3DS Max, but I can’t open the base scene. It says the file was saved in a newer version.
Is it possible to save the file in an older version? Thank you!
Same
Great tutorial as always 🤩
Thank you 😁
Hi AVA, I like very much your content. I was wondering if is there any chance of getting the LUTs you usually use during the postproduction phase. Thank you very much.
Could you do a video on colour matching 2d cutouts into 3d renders?
Thanks for your tutorial, it is very useful~
You're welcome 😊
Hi Ava, I enjoy your tutorials very much; they are very well explained and comprehensive.
My 2022 3DS Max can’t open the base scene. It says the file was saved in a newer version.
Is it possible to save the file in an older version?
Thank you
Hi, hope you are doing well,
can you please make an interior scene in corona ??
Regards.
At what point does lens shift to get parallel verticals become too much, and a regular camera preferred? I had a job recently where camera was on the 2nd floor looking down the 1st floor at a pretty steep angle (30-45 tilt?). Was about 4 meters between each floor slab level, and due to the nature of what we do (15m wide by 5-6m tall "TV" in this case) we always work with very wide angles (12-18mm usually, 24-30mm are rare). Trying to "look down using lens shift" just made it ugly and weird, and I ended up living with converging verticals as a lesser evil. But I'm not sure if "when it looks weird to the artist" is a good metric; quite often when there are things I do (I'm not professionally into "arch viz" as such, but we place our equipment into spaces and render for illustration) think look bad or ugly, it's because I *KNOW* the mistakes are there, but the customer will never spot it. Any rules of thumbs in professional arch viz regarding when and when not to use lens shift to get parallel verticals?
Excellent episode. I hear some humm.. sound is there AC that mic capture, sometimes I have isolate that kind of sounds from video and remove them later..
Thank you, we do a bit of work on audio in the editing software, I will check it out and hopefully improve :)
Best work
Thank you so much 😀
Hello i tried
getting the base file few different times but the file was unable to be received in the mail can you please check and update it or a direct link would be better btw loved your videos
Hi, I would like to apply the tutorial concepts, but the File version is for 3ds Max 2023. Could you have the version for 3ds Max 2022? A thousand thanks!!!
Well what renderer do artists use for animation? 30 minutes for a still frame? 15 hrs for 1 second of animation? @60fps ..Is that correct?
please can you do the same using corona render?
thank you for the suggestion ;)
Hey Ava! How are you? I've been watching your videos from time to time over the past few years and must say that you seem to know your stuff. I was wondering if you can help. This has little to do with the video I am responding to, but since it's your most recent video you are more likely to respond. This is a very simple question, which might have an easy answer, in which case thanks in advance. If the answer is complex thanks too. How do you link a screen projected environment map's rotation setting (W) angle with a moving object in a scene, like say a box, or a sphere? The challenge is to have the angle change to point at the object wherever it moves to on the screen.
I hope this isn't too difficult. Does anyone have any ideas?
This might help you: ua-cam.com/video/_3tTzKI3bb8/v-deo.html :)
can u save the file in an older version because i have 3dsmax 22 and file save in 3dsmax 23 version
what version is this base scene? I got 3dsmax 2022, but can't open it.
same
The same :(
3ds max 2023.
By the way, I have Cinema 4D & Corona render....So I can't open the file anyway, I'll make everything from scratch.
this link to download the scene isnt working after sending my infos (name and email), is it still working?
You switched to vray?? 🤔 Have you stopped using corona now?
I use both.
D5 is really good. I just found it and it’s amazing. Also free for 3ds max, blender, cinema 4D etc. I just cant figure out the renderer in max. It’s too expensive.. too
Hello, Is there any way to scale a model to a specific dimension in 3ds max ?
In the post production good monitor is needed right? Becz I used old laptop and set lighting then i check same image in different monitors it looks so dim
Yes, it's better to have a monitor with accurate color representation.
How can we reduce the time in rendering v ray 6 or 5 without reducing the quality
Check out my render settings video.
@@ArchVizArtist All right and thank you very much
Man, I came from using Mental Ray and tell you: this is blazing fast! Try to render using GPU, you obtain similar results way faster than using CPU.
@@ArchVizArtist Vray 6 takes too much time to Render to get just a simple shot ready
@@KayArchDesigns Right
Please make it for corona
thank you for the suggestion ;)
Hi .. Why Vray 6? You don´t use Corona from now? Can I work with your free scene if I use Corona renderer? Thank you so much!
Sure, it's almost the same :D
I cant download the base scane