Toolsday: What is the BEST Tool to Drill Holes in Concrete
Вставка
- Опубліковано 27 бер 2023
- In this toolsday I share my thoughts on what is the best tool to drill holes in concrete. Yes you can drill holes in concrete multiple ways, but depending on your hole size and how often you might be drilling those holes in concrete, the type of drill you use will vary.
Dewalt SDS 1 1/8" Rotary
amzn.to/3G10qB8
For me, the ideas in ua-cam.com/users/postUgkxAfqpMLyFn37qcqUl0FAzqkkycQeXqrhP Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.
Nice comparison and impressive results with the Dewalts. A few decades ago nothing bored like a Hilti. I have no idea how they are today but they outperformed everything on high strength industrial floors.
Lots of builders here in Australia have them, in my opinion they are very overrated and a pain to use, high vibration, no cutout if they jam (drill will smack you in the face), definitely not as powerful as newer more well known brands.
I got a SDS Max Dewalt on a killer sale a couple years ago, not the top of their range but it is a decent unit, better than most hiltis for waaay less money.
Hilti offers a 20yr warranty and service package with their rotary hammers, I reckon thats why the companies go for them.
The Ingersoll Rand 114GQC Air Hammer ua-cam.com/users/postUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS was just the tool I needed. I Use it to remove stuck bolts. If held at the right angle you can cut slightly into the bolt. Then turn the air hammer to where it will hammer the stuck bolt to unspin the bolt. Given a little practice it works great. This air hammer gives you the control needed to get the job done right. Very powerful yet still does not seem to have as much vibration as other guns I have used. One of the best I have gotten my hands on.
I bought the 20v Dewalt DCH273B to see if it would help break up ice with a 3" chisel from my driveway and around my house (I live in Lake Tahoe and we got over 700" of snow this year). I must say sds plus rotary hammers are amazing. Im not sure why you'd even need a corded version. SDS plus with a 3" chisel works great at breaking up ice dams too! The tool requires firm resistance for the hammer action to kick in so it's actually safer to use on a roof than you'd think.. I highly recommend picking one up if you have some serious ice you need to manage. Side note, haven't drilled any concrete with it yet...
I missed your Toolsday, great to see it again. Keep up the great work👍👍
Very informative video Kyle. I wish I had known this years ago, even if cordless options were probably not as available as today.
Thanks for filming Kyle! 👍😁
Best in UA-cam with tool reviews. Sincerely.
I've used the SDS with a 1" bit to drill a hole for a ground rod in concrete doing a whole house generator. It works great and effortlessly! The regular SDS drills the hole, small or big, without effort.
Obviously, if you are drilling as many holes as Kyle does on a post frame for his brackets, I would go with the bigger + SDS!
I have the DeWalt battery SDS drill and love it! Even when chiseling for a good amount of time was impressed how long the battery lasted.
I do have a Makita SDS but find the battery one so convenient!
the drill only function on the sds plus for using a carbide rebar cutting bit that has the sds plus shank. For instance, you're drilling in concrete with a sds plus masonry bit, you hit rebar, you swap out the masonry bit for a rebar cutting bit, and switch the function to drill only.
The bosch bulldog corded just works very well light weight I've used hilty pro level the bulldog drill 3 1 holes don't push on your hammer drills 1000 holes a month for 3 years
Yep, if it isn’t blue and begins with “B”, I’ll pass.
I always used my bulldog… this is maybe better tho serious
We putting earthquake beams in stairwell in a Hilton the bulldog out worked all others if new cordless drill are better thats amazing
Got the Bosch version of all these. Great video.
I’ve always cleaned out my holes by running the bit into a few times. Always worked for me
Dewalt makes great cordless rotary hammers. I have the 5/8 atomic sds plus, the flexvolt 1 1/4" sds plus, and the flexvolt 2" sds max. Ive been thinkin bout adding that exact 1 1/8" sds plus d handle you got and your making me want it more especially with the much more convenient dust extractor. Good video
I’ve used the SDS plus with a 1 1/8” bit to drill into a sidewalk next to a house where we set whole house automatic standby General Generators and the rotary drill makes it go through the concrete so easily that there’s really no strain! I used the type you set on the ground though, but I never attached the dust collection, but it’s a good idea to use dust collection though!
We started using the SDS plus because they didn’t burn up as many bits drilling brick for straps for the conduit running from the transfer switch to the generator, and brick can burn up bits fast. I think it has to do with the speed! The SDS plus is a money saver if you’re drilling a lot of brick for support brackets!
Great video thanks for putting it together
I use the Hikoki 36v with dust extraction and its good. Usually go for 12, 14, or 18mm holes for expansion or chemical anchors. Really quick and dust free.
Get the sds max 36v
In Europe there is way more brick and concrete than here in North America. My advise for a DIY person, maybe buy a light machine for some occasional small holes. But when you need to drill a lot of them, just RENT one of those big monsters. As a student, 40 years ago, I did exactly that and I drilled over a hundred 1/4 inch holes in super hard 10 year old concrete within an hour. The rent was minimal and my neighbors loved it that the noise was over so soon. 🙂
“You will own nothing and you will be happy”
go back to the Soviet Union commie
Thanks for another great video
the SDS will drill faster than a regular hammer drill, and the bits last longer! That's from years of experience! I can't say anything about the Max, but the SDS drill, is great. You will save time and money on bits for sure!
You can use the rotate only option, no hammer, when you use a diamond core drill in concrete.
Thank you RR Building very helpful
DeWalt has a great SDS drill, and the dust collection piece that connects to them I think are probably different based on which model you have. They do a great job of controlling the Silica dust, which can be very harmful to your health over time. Large commercial jobs are so big on controlling the silica dust, which can be from many different things, with machines that put down water on top and draw it up. If you haven't gone onto the OSHA site and taken the OSHA 10 or OSHA 30, I would suggest doing it for your safety and those who may work on your jobsite!
For 1/4 tapcons using a 3/16 bit overhead,the 5/8 m12 fuel is the best in my experience for its light weight and size.
I've drilled probably between 10-15000 holes using the m12,it's lightweight, and great for vertical in the up position, or horizontally.
I have the m12 hammervac,but prefer using packout vacuum.
My rules on drilling for any concrete fastner,whether pin/redhead/or large tapcon.
#1 overdrill by 1/3 depth needed for the specific fastner.
#2 vacuum as you go.
#3 use 1/3 more capacity for width for speed.
I have driiled shallow 2 inch holes with the m12 (only rated for 5/8 because that tool was closer.
I installed fence for 15 years (2004-2019) including plated posts,and tapconning post to masonry columns.
My arsenal is m12 fuel sds,m18 fuel 7/8,1 inch corded D-handle Bosch,and corded 2 inch sds max Bosch.
A regular cordless hammerdrill is a waste of time, except for less than 4 holes.
You shouldn't push sds+/max rotary hammer. Their hammer function works regardless of your pressure, unlike hammer drill. Its even recommended to push just enough to keep contact with concret, but not more, because that way hammer impulses will be stronger.
Thats why it is so efficient and easy to use.
slick video (intro) editing!! good job!
Good info Kyle. My Bosch just crapped out. Time to go cordless.
This is the first time I come across this channel and I straight up thought you were Canelo Álvarez the boxer😂 thanks for the video though brotha!
I haven't seen the model dust collection you have here, but looks much more convenient for the dust collection!
Picked one of those DeWalts up last year to install a new water line to my rental house. Sure beats a cold chisel and a hammer.
I use a cheap Titan purely for busting concrete. Cost £50 ten years ago, and has survived all the abuse I could throw at it! 8 jules of power is pretty sufficient for my needs, especially with a 400mm chisel bit!
One video I would love to see is how to go about the ordering of materials, specifically ordering metal. I always have to trim everything down to size. Is this common for you too? I would also love to see how you work with exterior lighting on walls with metal exterior. Anyways, just an idea on some videos. Thanks!
I picked up an SDS max to keyless drill chuck adapter and use the non hammer function to mix up very thick materials. It also runs the hell out of a strikemaster ice auger bit 😂
Love that toolsday is back! Is the metabo htp 36v or 18? I would love to see a comparison between the dewalt and metabo htp. Both with dust box attachments. Also another toolsday suggestion. Do you find that cheap vs expensive bits makes much of a difference in sds, multitool. Circular saw, grinder discs? Thanks
Metabo is both and in my experience roughly 17 years experience building and rehabbing homes, bits and blades make a world of difference Diablo blades for everything that involves a blade lol
I would love to see a Tools day done on whatever CAD program you use
Working in large commercial construction that is the most typical hammer drill too. Even in large scale you will see that drill 9/10
you can buy the proper dust extractor for the milwaukee which is basically like the dewalts one. the milwaukee m12 add on dust extractor can work with any brand and was mostly made to fit on older corded models
Please do a toolsday on dust extractors/shop vacs
That's the universal dust collection from milwaukee. It will fit any make and size. The milwaukee shown does have a dust collector that fits just like the dewalt for better visibility. FYI
Milwaukee makes a similar drill powered cleaner. I prefer the M12 fuel for smaller bits. I do like the new dewalt. I don't know which would win between the newest Milwaukee and newest dewalt. Both are great. Sds bits are better than most hammer drill bits. I use the sds plus drilling through ceramic or porcelain no hammer for TV mounting. The sds is just superior. A Ryobi sds will put that awesome XGT to shame in the concrete. And sds max 3/4" needs like 3-5 hits before it's through stucco lol
The only issue I have had with the Dewalt 60v SDS Max was recovering from the purchase price.
Could you talk about the best ways to drill medium to large holes, 1-4 inches, in concrete as well as softer masonry material like brick or block? For example there are SDS max spiral bits, SDS plus or max hole saws, diamond hole saws that fit in a regular drill, and dedicated diamond core drill machines.
Good to know
another data point: I’ve successfully used my 18v bosch to drill 2” holes in concrete using an sds plus core drill bit. Slow going and eats battery, but never came close to feeling like the shank was gonna break.
Question, just a project guy here. I have a heavy duty corded 1/2” Dewalt from the mid 80’s and drilled maybe a couple hundred holes. I just using the standard bits from Lowe’s or Home Depot and I get a lot of holes that tend to lead off location when the bit hits gravel in the concrete. Suggestions?
Yeah, you can imagine how much time and money you will save using the SDS for a 3/16 for a 1/4 tapcon! Way faster and you don’t burn through as many bits and your ears will be better for it! I actually prefer the SDS you set to the side at the beginning, and it is shorter if you need clearance as well!
‘Clean out the hole before you put it in’ 🤔😂😂😂
This boy is very good
I've got a Bosch 11264EVS
I am awear I am late to this party, however Milwaukee offers a dedicated dust extractor to most of thier impact hammer drills besides the M12 universal you shown here, to be a fair comparison with team yellow.
15:46 maybe use "drill only" mode for coring? Not sure.
You can't beat the 36V Hilti. 99% of my use is anchors though. The Husqvarna core drill for penetrations. We use dewalt at work. Probably run a few hundred drop ins a week. They feel cheap drill slow and die often.
Sometimes the problem with drilling into concrete with a regular hammer drill is that since it takes longer, it also reams the hole out more which isn’t a good thing.
I used a 28V Milwaukee 1/2" hammer drill to install up to 3/4" x 6" concrete anchors with no problems over 20 years ago? Now the 18V Fuels have probably more power than that had, so you may be able to get away with regular non-SDS style hammer drills for almost any size below 3/4"? What do you think?
Some states have pretty heavy fines for not having dust control...especially with concrete dust.
Thật tuyệt vời , tôi ước có được 1 bộ công cụ như bạn
We are often drilling 100+ holes one after another - 1/2" or 5/8" - mostly in garages and exterior for termite work and mostly simple vertical drill downs. Which tool would you buy? Looking at Hilti, Bosch, Dewalt and corded or cordless and sds plus or sds max. So many options.
The drill mode is use for drilling into thick steel like ibeam or c channel steel more easier cosz it heavy duty...also can drill into purling wood that use bolt&nut...
Love the content Kyle! Quick question, how does the dust collection on the SDS Plus operate since it doesn't require it's own separate battery? Is it rechargeable?
Runs off the tool battery
So what do you think the best option is for cordless miter saws lately? It’s been a long time since you done a comparison and am curious. I know DeWalt has the 120v cordless running on Dual 60v flex batteries, so I’m just curious. I’ve been in construction all my life and brands are always trying to out do their last tool!
Hey, great video! Im a contractor - do any of these options meet the requirements of OSHA Table 1 for Silica Control?
Only question I would ask is. Are all the bits two fluted or four? Vacuuming is way better than the bulb we used to use to blow the hole out and into your face if you didn't move your head. Can you turn the vacuoff if you get into a water situation?
Just disconnect the vacuum no problem
I've been thinking about making the switch to battery powered rotary hammers, just so that I don't have to lug around a generator any more. But how many 5/8 holes at about 9" deep would you guess you can get out of the SDS and SDS Max drills on an 8ah battery?
we typically drill all of the 5/8" holes on a standard project (maybe 40) holes with a couple batteries
@@RRBuildings I can see that! the small SDS drills holes like butter. the bits last forever!
when using regular hammer drill you should use speed 2
that's the truth on the concrete dust in the whole with a regular hammer drill, for sure!
What's the best method to drill for running conduit through roughly 20+ inches of foundation wall??
I need this. Spent honest to God 3 hrs using a hand hammer drill to drill a bunch of holes in a concrete wall last week.
Sort of a weird question ha, but where do you get your work pants from?
Truewerk is Kyle's Brand of choice.
Ditch the dewalt and go with Hilti. I had to buy a new hammer drill a couple years ago and the hilti out performed the dewalt all day long
I have seen videos if the Milwaukee M18Fuel hammer drill slice through that rock like butter.
“That is an impressively large hole”
Taking of the hammer function makes sense when drilling in tiles first and then into the wall…
Nice
But the hole bit is what is most important.. what’s the best to drill hole in concrete. Diamond but what brand
Thanks for the info by the way where do you buy your pants seems very comfortable thanks in advance
truewerk.com/?sca_ref=551902.6dfT3MtgXA
I recently bought a house the walls are concrete interior and exterior I've been looking for the right hammer drill my home is known has a superbuild I hear it's concrete inside and outside is concrete and stucco it's got rebar and chicken wire kinda annoying lol but house will stand against any storm u throw at it lol
No Bosch profactor sds max ?
You want to drill in concrete? Go to HARBOR FREIGHT get you a Bauer for under $150. Had it for 6 years drilled probably 300+ holes with it, its like brand new. Impressive tool.
You can’t compare the Makita to those dewalt drills. The smaller the drill you work your way up to the size hole you need. We don’t get sent tools like you do. My Makita 18v sds does exactly the same as the default model you’re using.
CAT brand power tools with graphene battery tech. Bro... do you even know what graphene is? It's the future!
the new makita 80v 52mm hammer drive has 21joules i think milwaukees largest has 8joules
Hammer drill time....🕺
I personally have found that the drill bit makes the biggest difference.
I would never drill a hole in concrete with a 1/2" one hand drill, that is a true exercise in futility and a patience-builder.
Pretty sure those are only good for brickwork.
To answer the host, I would use the drill only mode with an SDS drill to mix structural grout or cement, probably paint and render.
Not as good as a dedicated mixer but way better than a 1/2" drill.
Entiendo la comparación pero no lo hagas tan injusto usaste la velocidad 1 en el rotomartillo makita 😂 y lo correcto es perforar en ña velocidad 2
What about a Hilti? My Hilti is a few years old and still drills super fast. Okay the Hilti is more expensive but it performs!
Hilti with the vacuum is the best I've ever used.Better than any dewalt,Milwaukee,Bosch or makita.Its powerful and cuts holes for tap cons and anchors like butter and super fast.
Picked up the Hilti TE60 nuron few months back. What a beast! Hilti is the shit
This is turning into Project Farm 😂
never watched project farm...not sure what that means
@@RRBuildings Project Farm is an awesome UA-cam channel that does product comparisons (graphs, charts, ratings, etc.). Really great channel.
@@RRBuildings When it comes to real world testing of "things", in the way that you have done here, Todd is the master
From jeans to engine oil to lawn mowers and everything in between, if you are likely to use it in a working environment, he tests stuff, often to destruction to find out not only what is the best, but also what you may also consider if you are on a budget
2.6m subs too 👍
What about a 4 inch hole saw for a basement bathroom vent?
concrete core drill. be prepared to spend $$$. better to rent
The DeWalt can go up to 6"
Why isnt a auto feed screwdriver used in US when doing drywall? Cant see a faster way to screw drywall with
You commenting on the right vid, cause that has nothing to do with this vid? To answer your question though, they do. In fact, I don't know of the last time I've been to a project that didn't have them using one.
i know this is an old video, but whoever is recording makes it so difficult to focus its making me dizzy, great content though.
Percussion drill need spécial drill bit. !!
Where is the 1-1/8 xgt?
Great to see Dewalt outshine Milwaukee for once
Milwaukee has one with an inline dust collector.
Milwaukee has a D handle with under Neath dust control to also
i cant go back to using hammer drills after getting my first rotary hammers. the sound is so obnoxious and feels pretty weak
Agree
Missing camera operator credits!
The cordless SDS Max hammer drills aren't great.
Even with the XC9.0 batteries on the M18 one you will go through a whole charge trying to drill 1 1/2 hole through a foundation for a service upgrade or something. So unless you've got a pile of batteries and are able to charge on site they're not the best option.
9/10 times I'm using my regular hammer drill/driver, M12 SDS for slightly larger fasteners and then I have a Hilti 7 & 16 which covers basically everything except large coring sizes, which is rare for me.
Milwaukee's cordless SDS Max are garbage. Especially their 1-9/16 model which is the one you probably used.
There's much better cordless hammers from Makita, Metabo HPT and Dewalt. They'll still suck down batteries, but they aren't piss poor slow or give you permanent nerve damage like a Milwaukee does. A Makita 1-9/16" with AVT is one of the smoothest in the game and hits as hard as a Milwaukee 1-3/4" while weighing less. Made in Japan.
Maybe it's your bit? I don't have any experience with Milwaukee's battery sds's though. I use the DeWalt 60v sds max to drill 1.5" holes into granite and get a just under 25 minutes of continuous drilling. When I drill into concrete, it just melts through in about 20 seconds.
@@t0fast Bits (were at the time) nearly brand new, it's just a hog on batteries.
You're definitely not drilling an inch and half hole through 12-16inch deep concrete foundation in 20 seconds. Lol
A hammer drill is ideal for brick, mortar and cinder blocks, not for concrete.
There’s only one drill you should use always, that’s HILTI
Yeah I don't call that working. That Makita might eventually get the job done but that slowness is the time exhausting experience that makes me not even want to start the job.
Ryobi or bust bubba
😂 it’ll bust alright
It is an absolute mistake to drill into a regular impact drill with an SDS drill. An SDS drill only belongs in a rotary hammer. With a cordless percussion drill, "classic" masonry drills or modern multiconstruction drills are used.