How to Replace Front Lower Ball Joint 2007-14 Cadillac Escalade
Вставка
- Опубліковано 21 жов 2024
- Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ia/1ASB...
New Ball Joint Set from 1AAuto.com 1aau.to/ic/1ASF...
Modern suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how. This video shows you how to install new, quality TRQ ball joints on your 2007-2014 Cadillac Escalade.
• Check here for more videos on the 2007-14 Cadillac Escalade: • Cadillac Escalade 2007...
This repair was done on a 2013 Cadillac Escalade Luxury 6.2L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2007 Cadillac Escalade
2008 Cadillac Escalade
2009 Cadillac Escalade
2010 Cadillac Escalade
2011 Cadillac Escalade
2012 Cadillac Escalade
2013 Cadillac Escalade
2014 Cadillac Escalade
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oCu/1AX...
• Pocket Screwdriver
• Pry Bar 1aau.to/ohU/1AX...
• 10mm Socket 1aau.to/ox4/1AX...
• 18mm Socket
• 21mm Socket
• 22mm Socket 1aau.to/ob3/1AX...
• 36mm Socket 1aau.to/oC/1AAS...
• Ball Joint Press
• Brake Caliper Hanger 1aau.to/obr/1AX...
• Channel-Lock Pliers 1aau.to/obR/1AX...
• Snap Ring Pliers
• 1/2 Inch Impact Gun 1aau.to/ocC/1AX...
• Air Chisel
• Ratchet 1aau.to/oE4/1AX...
• Socket Driver
• Socket Extensions 1aau.to/oCt/1AX...
• Swivel
• Torque Wrench 1aau.to/oso/1AX...
• Rust Penetrant
• Center Punch 1aau.to/obM/1AX...
• Floor Jack 1aau.to/ojA/1AX...
• Hammer
• Jack Stands 1aau.to/oiE/1AX...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Cadillac Escalade 2007-14 3rd Gen: • Cadillac Escalade 2007...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Very good, precise, well performed an easy listening video.
Who ever buys this truck has got a gem… they do all their repair videos with this same silver Escalade 😂 👏🏼👏🏼
when you said beep you had me laughing, this video was helpeful
Can you please tell the viewers the size of the tool and wrench sizes for what particular part..
Can the lower ball joint be replaced on a steel or aluminum control arm? I was told there’s a difference
What kind of jack hammer do you use to get off the lower ball joint? Can't see your tool and you dont show it.
If you're worried about the upper ball joint torque use a crows foot, just remember 90° for an accurate torque application.
Some ball joints have fittings for grease. Why these don’t have grease?
Love the nice dents you banged in the control arm!
Thanks
Need alignment after this?
No
Good stuff
+Tony's Lawn Care Thanks for watching our video! 1aau.to/m/Shop-TRQ
The top of the knuckle looks cracked. Great vid tho👍
+Heavychevy Lou Thanks for watching our video! 1aau.to/m/Shop-TRQ
It just annoys me how easily he lined that cv up.
Broke the clip lol.
Purple safety tab came flying off🤣