Very very thanks, i was so confused with 5 wires, where to solder them, and you helped me. I tried before too, but couldn't succeed, now works perfectly fine. Thanks very much.
I have just fixed two of the same model watching your video as a tutorial. At the first one I had some struggles but managed them very well and now both of my earphones are functioning very straight. Thank you so much sir fixer helper
Awesome Bro 🤩 ⭐wire Details Are really nice , it worked on my JBL T500 wired ❣️ Repair Kraya Tha Ek Baar Stereo work nai kr rha Tha,--- fir ghar me bhai banaye ye video dekh k ek side thoda lose tha, Mic b kam Ni kr Rha Tha Fir mai banaya Yahi Video Dekh Ke--& it took 1 hour, So happy Bro🤩🤩🤩
hey. if any one have doubt about the model CTIA/OMTP on these. --- ALL WIRED JBL USE CTIA ---- i just needed this video and worked for me. but looked for this data on the jbl page. more data: -color guide in case you need it. Green - Left Red - Right Cooper - Ground White - Mic. the ground transaltion could not be so accurate bc english isnt my 1st language. but cooper wire might be consider as negative on the overall earphone circuit.
PLEASE HELP me with colors, i have same model JBL T110 but different wires colors. I have 5 (with yellow 6) wires. Green and golden (and yellow) are same as yours. But i have there black, striped gold-red and red (which i separated from golden).
Please reply bro I have jbl earphones.. Seperated male jack.. And removed outer wire coat exposing different kinds of wires twisted together.. Then following your video.. Carefully Seperated.... But what i got is as follows Blue wire Green wire As in ur video a white wire is hidden inside golden(Which you Seperated apart exposing white wire) But when i unwind the golden wire i got a red wire instead of white as in ur video... And a separate another gold wire. Andsome hairy white stuff. Now what i do which one is which??
I have the same model but the variation of the cable is that it brings a blue 1 green 1 gold a red and a white what changes should I make in the connection? I would really appreciate it if you could help me
Very helpful but JBL earphone doesn't have a red exclusive color It has yellow, black, red wrapped with copper(looks copper from outward) and copper wrapped with red(looks red from outward), green.
Hello man , I have the same model but colors of my cables are black isolation also inside is black,green isolation also green calbe inside,then only copper wire withots isolation,red isolated with copper inside, and twisted red cable with copper cable color. So its 5 cables and I dont know which one is for what .. Thanks you :)
Man, I used this video to fix my headphones since 3 months ago and it worked perfectly well all this time. And it worked well a few days ago until the left side began to be heard lower, and now it sounds very low, I do not hear its bass, I try to find the origin of the break moving the cables to find some "restoration" near the Jack or in the earbuds, but I didn't find anything, I just found a break where the main cable is divided in two (in the left cable), I moved the shaft of the left cable but it doesn't restored it either, I think it's there, but I don't want to open it without being sure, because if its not that part the one that is broken, it is the earbud (inside), and I don't want to break it more, is the only "good" headphone I have. Any ideas how to fix it? Man if you can make a video showing how to fix that part or an earbud of this model I will be so thankful, hope you can help me.
@@WeeKendView Thank you so much! I have a suggestion for you, if you are gonna fix the earbud, be extremely careful to not to break that red rubber bubble that is near to the white and red/black contacts, I thought it was a plastic bubble maded by the dispair/long use and ear heat, but no, it was the protection for a few little thin tin cables wich are quite fragile. I tried to "remove" that bubble (thinking *that* was the problem) with a needle and now that earbud is totally broken. Now I'm sure that it wasn't the earbud, it was the part were is divided in two. Hope this help you!
@@ChunStereo Yes man, both earbuds heard really hard just like a new ones. Although I choose to buy a new ones it also worth it this model it's not expensive and it's probably the best audio quality on low gamma.
In my JBL T110 Wired Earphone, The main wire comes with the Audio jack contains "Green, Red, Golden twisted with White wire in the middle, Blue" wire threads in Order. Then Right Speaker Wire which comes with the Microphone and Functioning Button Contains Same Like the wire with audio jack. (Green,Red,Golden Twisted with White in the Middle,Blue) The other wire with the left speeker contains Green,Green(As a Pair),Golden,Golden(As a Pair) In order. Totally it has 4 wires. I got seperated all these from the Soldered junction and I have no idea how to Combine and Solder these wires back to repair my Earphone. Please if anyone there help me out 🙏❤️
I have a earphone T110 but in right side can't hear anything, but in left side & button is playable Questions : Can I fix my earphone with your same tutor ? Plizz, reply me, Pleasee.....
@@santama1990 Creo que el dorado combinado con el otro dorado pertenece al lado derecho que no se escucha tan fuerte.. Y a lo mejor debió quedar algo pelado. Entonces no quedar ningún pelo fuera
Very very thanks, i was so confused with 5 wires, where to solder them, and you helped me. I tried before too, but couldn't succeed, now works perfectly fine. Thanks very much.
You’re welcome.
Thank you very much.. Subscribed your channel.I repaired my JBL after watching this. (sri lanka)
I have just fixed two of the same model watching your video as a tutorial. At the first one I had some struggles but managed them very well and now both of my earphones are functioning very straight. Thank you so much sir fixer helper
You're welcome .
My soldering skills maybe awful but it saved me money
do you need that metal stick? ( not the soldering)
My own jbl t110 wiring
Green, bare gold=gnd
White=mic
Red=right
Blue=left
Registered / guaranted by indonesian compny, made in china.
Bcareful for cheap connector from china, I got long clip hook for gnd wire its connect to mic, not to gnd.
What is "GND"? I mean, what is for?
@@GeOOPLAY1 Gnd= ground, or negative polarity.
@@bayuamanda1901 Thank you!
@@bayuamanda1901 makasih brow kwkw
Muchas gracias, me sirvió mucho. Thanks!
Wahh incredible 🤟🤟😍
Eu tenho que te agradecer de montão, Muitooo obrigada pelo tutorial💖
Meu fone voltou a funcionar💖💖
thank you, you saved me a lot of trouble 🇹🇷 🇹🇷
You are the best... thank you
Sos un Capo !!! Gracias!!
Excelente video, gracias y bendiciones desde Perú
Awesome Bro 🤩
⭐wire Details Are really nice , it worked on my JBL T500 wired ❣️
Repair Kraya Tha Ek Baar Stereo work nai kr rha Tha,--- fir ghar me bhai banaye ye video dekh k ek side thoda lose tha, Mic b kam Ni kr Rha Tha
Fir mai banaya Yahi Video Dekh Ke--& it took 1 hour,
So happy Bro🤩🤩🤩
Thank you so much brother it's working 10000%
❤❤❤❤❤❤❤❤❤❤💖💖💖💕
Thank you soo much bro
Bai very very thanks
Superb.......man
Wow. Nice video
Thank you ❤️🙏
Very good stuff worked
Thank you!!
What is the alloy you use to weld?
hey. if any one have doubt about the model CTIA/OMTP on these.
--- ALL WIRED JBL USE CTIA ----
i just needed this video and worked for me. but looked for this data on the jbl page.
more data:
-color guide in case you need it.
Green - Left
Red - Right
Cooper - Ground
White - Mic.
the ground transaltion could not be so accurate bc english isnt my 1st language. but cooper wire might be consider as negative on the overall earphone circuit.
how do I return the plastic cover of the plug sir? pls give tips on covering the plug
Bhai Kaun Wire Kiske Liye Hai Bta Skte Ho Kya Koi
Left Speaker =
Right Speaker =
Mic =
Aur Golden Wire = ?
Which cable is for the Mic or is that given up once fixed
Thank you so much bro 😍😍
I 've fixed my own earphone so easily 😍😍
how did you disassemble the jbl t110 headphones
I did this and im not getting stereo....is it because we mixed those two wires or is it a soldering error where both left and right got connected?
Mic is white cable ?
i have a problem in the microphone do you have any imagen?
the green is not conected and i dont know where is
Good job
My jack tip was broken where can I get the spare
Muchas gracias broooo!!!!! Me salvaste, me desesperé y quería tirarlos a la basura jajaja
Los reparé pero hice lo que indicó el amigo pero uno se me escucha más duro que el otro lado... ¿Que sería?
Thank you so much man! It works pretty well
How to separate From audio jack?
My earphone sounds only the right side. Could I repair this or there is nothing to do ? :(
thanks 👍👍
Welcome 👍
bhai btana jrur mene earphone ki taar nikaal di h
👍
Bhi thik hoga kya
In my earphone the button is not working properly, it works only when pressed hard , can you fix this issue.
How about mine, have black wire🙄
o bhai mere pass T160 hai but usme white wire h hi nhi...to 4 points pe 3 taar kese lagaunga
PLEASE HELP me with colors, i have same model JBL T110 but different wires colors. I have 5 (with yellow 6) wires. Green and golden (and yellow) are same as yours. But i have there black, striped gold-red and red (which i separated from golden).
My left ear is enjoying
Khana rehte ho aap mera bhi bna do bhai
Please reply bro
I have jbl earphones..
Seperated male jack..
And removed outer wire coat exposing different kinds of wires twisted together..
Then following your video.. Carefully Seperated.... But what i got is as follows
Blue wire
Green wire
As in ur video a white wire is hidden inside golden(Which you Seperated apart exposing white wire)
But when i unwind the golden wire i got a red wire instead of white as in ur video...
And a separate another gold wire.
Andsome hairy white stuff.
Now what i do which one is which??
Can you tell me the model number of your earphone ?
This one
I connected all the wire but the problem is when i play music it continuesly connecting disconnecting.....
I have the same model but the variation of the cable is that it brings a blue 1 green 1 gold a red and a white what changes should I make in the connection? I would really appreciate it if you could help me
The common jbl connection-
1 - Green
2 - Red/Blue
3 - Golden
4 - White/red
me super sirviooo
Se te escuchan los dos duro???
Very helpful but JBL earphone doesn't have a red exclusive color
It has yellow, black, red wrapped with copper(looks copper from outward) and copper wrapped with red(looks red from outward), green.
Plz help mee
Hello man ,
I have the same model but colors of my cables are black isolation also inside is black,green isolation also green calbe inside,then only copper wire withots isolation,red isolated with copper inside, and twisted red cable with copper cable color. So its 5 cables and I dont know which one is for what .. Thanks you :)
Send me a photo of your earphone in my instagram
@weekend_view_
How do i take the plastic off the plug bro
Use a hard cutter or a razor blade
Man, I used this video to fix my headphones since 3 months ago and it worked perfectly well all this time.
And it worked well a few days ago until the left side began to be heard lower, and now it sounds very low, I do not hear its bass, I try to find the origin of the break moving the cables to find some "restoration" near the Jack or in the earbuds, but I didn't find anything, I just found a break where the main cable is divided in two (in the left cable), I moved the shaft of the left cable but it doesn't restored it either, I think it's there, but I don't want to open it without being sure, because if its not that part the one that is broken, it is the earbud (inside), and I don't want to break it more, is the only "good" headphone I have.
Any ideas how to fix it?
Man if you can make a video showing how to fix that part or an earbud of this model I will be so thankful, hope you can help me.
I am not sure. But I will try make a video.
I gave this earphone one of my friend after repair.
@@WeeKendView Thank you so much! I have a suggestion for you, if you are gonna fix the earbud, be extremely careful to not to break that red rubber bubble that is near to the white and red/black contacts, I thought it was a plastic bubble maded by the dispair/long use and ear heat, but no, it was the protection for a few little thin tin cables wich are quite fragile.
I tried to "remove" that bubble (thinking *that* was the problem) with a needle and now that earbud is totally broken.
Now I'm sure that it wasn't the earbud, it was the part were is divided in two.
Hope this help you!
@@GeOOPLAY1hello!.. did it work for you? The 2 are heard very hard ???
@@ChunStereo Yes man, both earbuds heard really hard just like a new ones. Although I choose to buy a new ones it also worth it this model it's not expensive and it's probably the best audio quality on low gamma.
Is it only me or did everyone sent it to guarantee for several times and it still is broken. Everytime one side of it is broken
Bro I don't have second golden wire but I have additional blue wire ,what I have to do, please tell me , model is same.
The same problem 😕
@@sergio99998 bro mujhe solution mil chuka hai.
@@sergio99998 blue wire aur golden wire dono bhi common hai maine multi meter se check kiya .
@@sergio99998 join golden wire and blue wire together , blue wire mic and switch ka common wire hai .
Plz help
i don't have the white wire in the same JBL t110 ear phones The colors are different ( gold- red, green, black, red)
say the solution bro
My jbl bt 110 does not turn on after it got washed with my dirty clothes. What to do? 😕
rewash it with your clean clothes.
Guys,Is it really just a mistake in Jack? Thanks for the answer.
Idk.
I have a JBL endurance run which have 5 wires inside please can you suggest me about the repairing
Can you tell me the color of those wires ?
@@WeeKendView thanks for your prompt reply
@@WeeKendView red, green, golden, red+golden, green+golden
Is there any blue or black wire ?
@@WeeKendViewno there is no such colour wire is available
In my JBL T110 Wired Earphone,
The main wire comes with the Audio jack contains "Green, Red, Golden twisted with White wire in the middle, Blue" wire threads in Order.
Then Right Speaker Wire which comes with the Microphone and Functioning Button Contains Same Like the wire with audio jack. (Green,Red,Golden Twisted with White in the Middle,Blue)
The other wire with the left speeker contains Green,Green(As a Pair),Golden,Golden(As a Pair) In order. Totally it has 4 wires.
I got seperated all these from the Soldered junction and I have no idea how to Combine and Solder these wires back to repair my Earphone.
Please if anyone there help me out 🙏❤️
So in other words I need new ones
Mic red or white?
white
1 blue 1white 1golden 1red 1 green
did you get an answer?
Per meri lead me 1 side work Nahi Kar rahi Kya karu Batna please
Isko dubara join korna porega soldering iron se.
mic not working
Mera headphon mah blue colour wride hai
my earphones is blue wire but is easy repaire
Per yar meri earphone me blue wire h to Kya karu
jbl ka dusra model hai kya ?
Kaise settings korungi
Hey Sorry for late reply,
Actually mea ghar pe nahi tha . earphone model number bata sakte ho kya ?
Jbl T110
Can i also use a lighter instead of this thing in 1:02
Yes , You can use a lighter to burn the plastic coating.
But you need to use that soldering iron to solder the wire
Bhai mujhe wier hona kaise miltha
Kya ?
Is it really works?
Why wouldn't it?
Man how to insert the rubber tips back. Im struggling with it. Any tips ?
you are watching this with your broken earphone
Mic not work
I have a earphone T110 but in right side can't hear anything, but in left side & button is playable
Questions : Can I fix my earphone with your same tutor ?
Plizz, reply me,
Pleasee.....
Yes
Super pude arreglarlo
Se te escuchan los dos duro??... Yo reparé pero se me escuchan el izquierdo muy fuerte que el derecho que está bajito... ¿Que sería?
Que raro, lo hice tal cual, y me funciono perfecto y eso que ya van dos reparadas porque la segunda me lo mordió mi perro.
@@santama1990 Que bueno. Y no será porque uno de los pelos de cobre dorado esté algo pelado? Y a ti te quedaron perfectos esos cablecitos?
@@ChunStereo solo es unir los cables y soldarlos. Muy importante no dejar ningún pelo suelto y aislar cuidadosamente para que no choquen uno con otro.
@@santama1990 Creo que el dorado combinado con el otro dorado pertenece al lado derecho que no se escucha tan fuerte.. Y a lo mejor debió quedar algo pelado. Entonces no quedar ningún pelo fuera
Hallo
Ну и зачем проще новые купить
Is this real please reply
Which part you think is fake .
@@WeeKendView no all part are real I'm just confirming.
This will work ?