I also use a filter drier when im reusing the refrigerant. It is a company policy and i 100% agree with it. I also like that you added a liquid line pressure tap. I'd suggest when you remove compressors or have compressors with an oil port....do an oil test. I use and trust the Phase 3 from Nu-Calgon. Its another test, proof of an issue, and just generally a good idea. On our chillers, as part of the PM process we always send in an oil sample to be tested. It has saved many chillers from having a catastrophic failure. Great video as always Chris
Don’t know why I am here. I know nothing about AC units other than I got my home fan to spin with a water jet when the capacitor went out. These videos are awesome.
Lol, "It means that the compressor was overheating for a long time...." Literally every compressor at my property looked like that when I arrived 5 years ago. 30 compressors and 16 condensers later, I only have 242 compressors to go! Yay!
I remember contacting Carrier a while back I was trying to replace one of those fixed Orifice units . Guy on the Carrier side told me 90% of the time it’s not the orifice that gets restricted. He recommended I replaced the drier and flush the crap out of the unit with NITRO that did the trick taking in consideration I only had a 2-3 degree temperature drop across the drier . I’ve tried the same thing on 3-4 units with success 🤷🏻♂️😀
Great call proving and making a quick call on that drier. Where I've worked, guys would have called that a leak and spent a day looking for it, then to probably go to a clogged evap coil. Drier would be changed in the process, and we would have felt like heroes. I always hated working with people who just swap things out til the unit works. Your channel is an outstanding field teaching tool for newcomers and old timers alike. 👍 for that Apion Core Remover, best brand of core tools I've used, always worked smooth.
Chris, I might be wrong but i think that the residual of the refrigerant left in the lines is what creates the pressures in the lines when testing with nitrogen.
Based on how that compressor looked + the constant vibration, I completely agree it needed to be replaced. Also, love using the other filter to protect your equipment + clean the refrigerant as it is transferred back into the system. I have watched quite a few of your videos including some where the refrigerant was reused and don't recall seeing that treatment filter being used before. Perhaps you did it, but just didn't show it in the video.
High amperage draw from the bad compressor caused the contactor to overheat and melt. Luckily there wasn't an electrical fire (judging by the looks of that contactor)
What’s the difference between filtering when vacuuming vs filtering when you are filling. Wouldn’t filter when removing so you don’t risk contamination in your tank?
Hey, tell them go buy about 5 of those portable ac units that have the external tube for the condenser exhaust and just vent them into the hallway. that way they can at least rent the room and have the occupants comfortable until you finish.
Really enjoy your videos and tips. Very helpful. I wish that you would tell us which type of refrigerant your working with in the beginning. BTW I got into the hot/cold side later in my career. Wish I'd had UA-cam back then. All the best, Sam.
My home A/C (a mini split bought in 2008) is running with this exact Liquid Gold now, and its main control board is fried because I didn't do PM to it, and high humidity from my humidifier just collected in it. (In China household, you have to do PM to your own A/C most of the time, especially living in the rural-city conjunction areas like me) And it is still running, using the jumpstart button on the unit, as the remote is completely useless. I don't want to change it because of the hassle no matter how small someone else thinks it is. I think some of your clients are thinking in the same way.
Is it possible the head was little high due to 110° Outside and hot and humid inside? And after it runs and catches up it will go back down to normal operating pressures as the building gets back climatized properly? Just asking sorry if this is stupid question.
I use a #0 tip, #2 Tip and a #15 rosebud tip, I will discuss this on my Livestream on UA-cam this evening 9/4/23 @ 5:PM (pacific) come on over and check it out ua-cam.com/users/liveOz0hgO03xGI
Use a thermal imager, you’ll see an unacceptable TD across the Accutrols, anywhere from 1 to all of the takeoffs. Wax, varnish, & other contaminants are a known issue. Brand T knows about it too. Coming from a former Brand C Mechanic.
I had a thought... You can use old compressors that you've replaced to teach your techs the proper way to solder a joint since the compressor is already borked, it doesn't matter if they burn it with the torch...
Nitrogen might not be all that Chemically Reactive, but like ALL materials, it's Thermally Reactive...AKA it expands when it gets hotter and contracts when it gets cooler...
If there's a restriction in the system and is causing the head pressure to be really high, why isn't the compressor automatically turning itself off? Don't they have a high pressure sensor for a reason?
I watch your videos for entertainment and have a question. In regards to WHY the filter was plugged....considering the original compressor had extensive overheating issues in the past + a strong vibration now, it seemed to me the most logical reason for the original filter to be clogged would be due to debris (metal shavings, etc) clogging the filter as the compressor slowly failed. Since you didn't mention it as a likely cause, I am sure there is something obvious that I overlooked, but I hardly know anything about HVAC.
Couple of questions 1 what type of torch tip are you using and 2 if you are actively looking for a leak would you still only go to 150? I normally go around 400.
Always check those carriers for condenser motor issues, u get a pressure trip which requires a reset and u get called back next day. It can restart like normal while u up there , but needs be checked for bearing issues. And always remember what NASA discovered in the 60s with astronauts in ambients over 95 degrees ,humans are 60 percent more likely to make errors in judgment. Can cause a misstep on top of an extension ladder !
Quick question Chris, how are those appion core depressors doing? How long have you had them, do they leak? I bought a JB depressor but it leaked after the third use. Been looking for a good pair
so far so good, I will discuss this on my Livestream on UA-cam this evening 9/4/23 @ 5:PM (pacific) come on over and check it out ua-cam.com/users/liveOz0hgO03xGI
I've seen R422B in units here in the states. Customer probably opted for re-using the refrigerant since charge was so close to factory, probably a cost cutting factor compared to throwing in 9 pounds of new 422 refrigerant. I've been out of service and on install for a few years year now, so I've yet to see the D variant of R422.
Yeah just lack of maintenance, I will discuss this on my Livestream on UA-cam this evening 9/4/23 @ 5:PM (pacific) come on over and check it out ua-cam.com/users/liveOz0hgO03xGI
@@brandonle4930 If the liquid drier was compromised internally/ debris from that. The evident heat from the discharge dome on the compressor. Poly does not do well with heat. The suction would just catch any left over pookie. Seems like cheap protection for new compressor to me
I also use a filter drier when im reusing the refrigerant. It is a company policy and i 100% agree with it. I also like that you added a liquid line pressure tap. I'd suggest when you remove compressors or have compressors with an oil port....do an oil test. I use and trust the Phase 3 from Nu-Calgon. Its another test, proof of an issue, and just generally a good idea. On our chillers, as part of the PM process we always send in an oil sample to be tested. It has saved many chillers from having a catastrophic failure.
Great video as always Chris
Don’t know why I am here. I know nothing about AC units other than I got my home fan to spin with a water jet when the capacitor went out. These videos are awesome.
Lol, "It means that the compressor was overheating for a long time...." Literally every compressor at my property looked like that when I arrived 5 years ago. 30 compressors and 16 condensers later, I only have 242 compressors to go! Yay!
I remember contacting Carrier a while back I was trying to replace one of those fixed Orifice units . Guy on the Carrier side told me 90% of the time it’s not the orifice that gets restricted. He recommended I replaced the drier and flush the crap out of the unit with NITRO that did the trick taking in consideration I only had a 2-3 degree temperature drop across the drier . I’ve tried the same thing on 3-4 units with success 🤷🏻♂️😀
Thank you for up loading these. Videos there always so interesting you are the only reason I know anything about hvac
Great call proving and making a quick call on that drier. Where I've worked, guys would have called that a leak and spent a day looking for it, then to probably go to a clogged evap coil. Drier would be changed in the process, and we would have felt like heroes. I always hated working with people who just swap things out til the unit works. Your channel is an outstanding field teaching tool for newcomers and old timers alike.
👍 for that Apion Core Remover, best brand of core tools I've used, always worked smooth.
I LOVE how there's electrical tape on the low voltage wire buts but not the high volt ones lol
Great Repair and Replacement Video. Your Customers are Very Lucky your Company Supports their Business HVAC Needs. 👍🙏
A clean condenser coil, amazing!
Chris, I might be wrong but i think that the residual of the refrigerant left in the lines is what creates the pressures in the lines when testing with nitrogen.
I'm a member because I learn a lot from your videos
Based on how that compressor looked + the constant vibration, I completely agree it needed to be replaced. Also, love using the other filter to protect your equipment + clean the refrigerant as it is transferred back into the system. I have watched quite a few of your videos including some where the refrigerant was reused and don't recall seeing that treatment filter being used before. Perhaps you did it, but just didn't show it in the video.
A great way to start the day. A new HVAC/R Tech Video, great Brain food. Be careful out there, and have a wonderful weekend.
Good job Chris, You always do good work, even when you don't want too, and that's good thing.
High amperage draw from the bad compressor caused the contactor to overheat and melt. Luckily there wasn't an electrical fire (judging by the looks of that contactor)
What’s the difference between filtering when vacuuming vs filtering when you are filling. Wouldn’t filter when removing so you don’t risk contamination in your tank?
Hey, tell them go buy about 5 of those portable ac units that have the external tube for the condenser exhaust and just vent them into the hallway. that way they can at least rent the room and have the occupants comfortable until you finish.
Excellent repair.👍
Professionally done 👍.
Really enjoy your videos and tips. Very helpful. I wish that you would tell us which type of refrigerant your working with in the beginning. BTW I got into the hot/cold side later in my career. Wish I'd had UA-cam back then. All the best, Sam.
Great job! Your De briefing towards the end of the video is something I look forward too.God Bless!
Thanks for another awesome video
Keep up the good work.
Great video as always.
Nice work as always Chris.
My home A/C (a mini split bought in 2008) is running with this exact Liquid Gold now, and its main control board is fried because I didn't do PM to it, and high humidity from my humidifier just collected in it. (In China household, you have to do PM to your own A/C most of the time, especially living in the rural-city conjunction areas like me) And it is still running, using the jumpstart button on the unit, as the remote is completely useless. I don't want to change it because of the hassle no matter how small someone else thinks it is. I think some of your clients are thinking in the same way.
Your videos help me out a lot . These consistent video uploads are great 🙏
Is it possible the head was little high due to 110° Outside and hot and humid inside? And after it runs and catches up it will go back down to normal operating pressures as the building gets back climatized properly? Just asking sorry if this is stupid question.
Thanks man for your time recording these videos, I am small hvac business owner.
What tip are you brazing with man.
I use a #0 tip, #2 Tip and a #15 rosebud tip, I will discuss this on my Livestream on UA-cam this evening 9/4/23 @ 5:PM (pacific) come on over and check it out ua-cam.com/users/liveOz0hgO03xGI
Tell them about the Battery power Vacuum pump from NAVAC
4 CFM or 2 CFM pumps
Have you ever used the recovery machine to pump refrigerant from the jug into the system?
great job,Does compressor 2 have a lock out for short cycling on high head ?
Yes
Use a thermal imager, you’ll see an unacceptable TD across the Accutrols, anywhere from 1 to all of the takeoffs. Wax, varnish, & other contaminants are a known issue. Brand T knows about it too. Coming from a former Brand C Mechanic.
I had a thought...
You can use old compressors that you've replaced to teach your techs the proper way to solder a joint since the compressor is already borked, it doesn't matter if they burn it with the torch...
Great Job!
I've I always thought because of the check valve on a scroll compressor you would need to charge via the suction or low side
I will discuss this on my Livestream on UA-cam this evening 9/4/23 @ 5:PM (pacific) come on over and check it out ua-cam.com/users/liveOz0hgO03xGI
Greetings. I'd like you to do a presentation of the program usage of a Dixell XJM60D or equivalent .
I would like to see some fresh install videos
Nitrogen might not be all that Chemically Reactive, but like ALL materials, it's Thermally Reactive...AKA it expands when it gets hotter and contracts when it gets cooler...
For a reallry trippy indoor blower motor contactor, label it HAL 😛
If there's a restriction in the system and is causing the head pressure to be really high, why isn't the compressor automatically turning itself off? Don't they have a high pressure sensor for a reason?
I watch your videos for entertainment and have a question. In regards to WHY the filter was plugged....considering the original compressor had extensive overheating issues in the past + a strong vibration now, it seemed to me the most logical reason for the original filter to be clogged would be due to debris (metal shavings, etc) clogging the filter as the compressor slowly failed. Since you didn't mention it as a likely cause, I am sure there is something obvious that I overlooked, but I hardly know anything about HVAC.
Please discuss billing and pricing sometime
I have a question for you can you run a portable ac for 15 hours nonstop with no rest cycles or will this burn up the compressor
Couple of questions 1 what type of torch tip are you using and 2 if you are actively looking for a leak would you still only go to 150? I normally go around 400.
Always check those carriers for condenser motor issues, u get a pressure trip which requires a reset and u get called back next day. It can restart like normal while u up there , but needs be checked for bearing issues. And always remember what NASA discovered in the 60s with astronauts in ambients over 95 degrees ,humans are 60 percent more likely to make errors in judgment. Can cause a misstep on top of an extension ladder !
My main concern would've been operating amps of the new compressor, pretty sure it's running at or over FLA with head pressure that high, no?
What did the high head pressure on circuit #2 end up being?
Good old R22 systems what's a pound of R22 run these days last time I bought a 5 lb jug it cost like $350
Quick question Chris, how are those appion core depressors doing? How long have you had them, do they leak? I bought a JB depressor but it leaked after the third use. Been looking for a good pair
so far so good, I will discuss this on my Livestream on UA-cam this evening 9/4/23 @ 5:PM (pacific) come on over and check it out ua-cam.com/users/liveOz0hgO03xGI
shut the power off ASAP. cuz the ice in the compressor will burn or short circuit the compressor terminal if the ice reach that area.
this channel is more about replacing compressors and units than doing any repairs.
How does the app know whats the target superheat?
@2:13 The plastic on that relay is melted! That's a problem! Holy...
Dont you have R422D down there ? In canada whe have that and its a direct replace to R22
I've seen R422B in units here in the states. Customer probably opted for re-using the refrigerant since charge was so close to factory, probably a cost cutting factor compared to throwing in 9 pounds of new 422 refrigerant. I've been out of service and on install for a few years year now, so I've yet to see the D variant of R422.
@@bairfamilyfarm1336 in canada R422D is alot cheaper than 22 and 22 is impossible to find. I thing 22 is 20$ a lb and 422 is 4-5 a lb
I will discuss this on my Livestream on UA-cam this evening 9/4/23 @ 5:PM (pacific) come on over and check it out ua-cam.com/users/liveOz0hgO03xGI
There are a lot of THIS GUYS on these roofs you work at.
Nice vid Bud ... Thx
Isnt the floormounting just lose? Or rubber isolation broken?
Did you bisect that Carlyle compressor?
No not this one
please help me understand, why would someone buy a aircon tech ?
999 LIKES BUT NOW 1K THANKS TO ME!
Where do you think the filter blockage come from?
cooked oil/wax from an overheated compressor maybe?
Yeah just lack of maintenance, I will discuss this on my Livestream on UA-cam this evening 9/4/23 @ 5:PM (pacific) come on over and check it out ua-cam.com/users/liveOz0hgO03xGI
The term "Ton" is from melting river ice in the 1800s?
Is Carlyle made by carrier?
I think
ALSO NEVER EVER TAKE THE TORCHES BACK TO THE TRUCK UNTIL YOU ARE UNDER 900 MIKEYS!
I think im gonna put an hvacr sticker on my car because why not
Honestly if you’ve seen the back of my car you’d know im a sticker connoisseur
I received the three stickers and they are great thank you so much
They look very nice on my car
Why is the JB coremax removal tool 750$? lol. That is why I hate Coremax.
Why don't you use sealed contactors? You wouldn't get sand in them
Cost
@@specialK_hvac lifespan justifies it. Plus it's like $72 and lasts 10 years assuming it gets pulled in for 3minutes every 7 minutes
@@catfood9707 if it's 10 years at 3 minutes pulled in then thats 5 years at 6 minutes pulled in or 2.5 at 12 minutes etc. Not much savings.
@@lexmarks567 was using the info for a older contactor. The one that replaced it is rated for 5.5 million cycles.
Way too much solder on those connections.
Need more, not enough
Suction driers…..?
No? I get you were in a hurry is there any other reason you don’t install them? Just curious
Why?
@@brandonle4930 If the liquid drier was compromised internally/ debris from that. The evident heat from the discharge dome on the compressor. Poly does not do well with heat. The suction would just catch any left over pookie. Seems like cheap protection for new compressor to me
I will discuss this on my Livestream on UA-cam this evening 9/4/23 @ 5:PM (pacific) come on over and check it out ua-cam.com/users/liveOz0hgO03xGI
Perfect opportunity to let your apprentice solder…gives him some experience with your supervision while you record…just saying…
Lunch ? I’d never left you working for me to go eat . I’ll eat later or when or I get home.
684 Thumbs uP
✌🏾
dining room chain