I like it. Good build without needing bent lamination and steam etc. [ which a lot of people don't have access to ] yours is probably easier for most and had some good features. Thks from the UK
continues to say this is sketchy don't this at home....me at home : what mama don't know won't hurt her... lmao love your content so glad I found this your a Gem my dude
Looks really good. A couple suggestions: To make the curve of bends cleaner, the kerf cuts needed to be deeper, I would also suggest wetting the board before bending to loosen up the grain. Also, a straight edge with two claps is basically as good as a track saw, just less efficient.
A possible alternative build method... Cut your horizontal braces down by however thick your plywood top is, minus 1/16 inches, that way, once it's glued and tacked on, the plywood is 1/16" taller than the vertical support. When you sand it down, it'll sand level. You can save on material since you won't need to cut the plywood as wide, and won't need to cut the veneer to hide those kerf bends. I also wonder how the table would look if you used smaller cuts on the plywood? Would it have a smoother curve, or be just as blocky?
Great job need to try it.. also love your choice of music, coming to think about it whats the name of the song prior to the last song where u were applying the poly?
A bead board top would look cool too. Also instead of plastic inner-skin build som fold out pocket cupboard/shelves for remotes, game controllers, etc.
Turned out great. Do you own a router table? I've been meaning to make one but keep putting it off. Then when I use my router, I wish I had a table. Not just for efficiency but for dust control as well.
I’d suggest red for bottom. I like the look of women’s high heals that have bottom red souls, colors make it really stand out.
I really love the bottom as white it's such a nice contrast
That looks best white! It pops bigtime!
I like it. Good build without needing bent lamination and steam etc. [ which a lot of people don't have access to ] yours is probably easier for most and had some good features. Thks from the UK
Thats very cool. I am getting some very good ideals from this video.
Wow. I wish i was so skillful. Nice work.
continues to say this is sketchy don't this at home....me at home : what mama don't know won't hurt her... lmao love your content so glad I found this your a Gem my dude
Thank you!
I love your videos I can relate and I don't fall asleep You're the best!!!
i get my best naps when i watch youtube lol
Great Job!!!! For the bottom, what I would try is to keep it white and implement color changing LEDs.
Looks really good. A couple suggestions: To make the curve of bends cleaner, the kerf cuts needed to be deeper, I would also suggest wetting the board before bending to loosen up the grain. Also, a straight edge with two claps is basically as good as a track saw, just less efficient.
Yeah I did use a red rag to wet the board. And true haha but I have my track saw now so I'll be using that 😅
High quality coffee table
Your video quality is going up keep it up
Thank you!
Nice build, thanks. I think the black finish do it justice.
Honestly this is amazing I would buy it
Nice job
I will try
A possible alternative build method... Cut your horizontal braces down by however thick your plywood top is, minus 1/16 inches, that way, once it's glued and tacked on, the plywood is 1/16" taller than the vertical support. When you sand it down, it'll sand level. You can save on material since you won't need to cut the plywood as wide, and won't need to cut the veneer to hide those kerf bends.
I also wonder how the table would look if you used smaller cuts on the plywood? Would it have a smoother curve, or be just as blocky?
The design is cool, great job! I would leave it white as well.
Nice looking table
Thank you!
Super duper. 👍
Very Nice
I bet your home might be museum of furniture!
It's getting there haha
Omg i was looking for this exact video for
Hours thanks
Glad I could help
Can you share the size of this awesome coffee table?
Super bro..
I will try
Fantastic fantastic I love it, thank you
Thank you!
I would suggest silver leaf. Its a cool looking finish you can’t replicate with paint and it should stick to your plastic.
Great job need to try it.. also love your choice of music, coming to think about it whats the name of the song prior to the last song where u were applying the poly?
A bead board top would look cool too. Also instead of plastic inner-skin build som fold out pocket cupboard/shelves for remotes, game controllers, etc.
Cool ass table. Looks just painted black to me though. I'm willing to bet the grain profiles are much more visible in person
Red would look cool.
Turned out great. Do you own a router table? I've been meaning to make one but keep putting it off. Then when I use my router, I wish I had a table. Not just for efficiency but for dust control as well.
I do not have a router table but it is on my tool list haha
Leaving it white keeps it clean and fresh. Anything else would probably shorten the ‘shelf life.’
👌👌👌👌👌👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻 Wish you not paint it put you did a great job ❤️❤️
Thank you!
would it be possible to downscale this to a regular sized usb-c port
What is the software design do you use?
I use sketchup web version. It's free 🙌
Dope
Commenting for algorithm
Lit 🔥
👍👍
What kind of plywood that you bend ????
Baltic birch plywood
Leave it white.
I vote hot pink
Took the words right out of my mouth lol